User Manual for CIRGO models including: Courier E-Bike Rent, Courier, E-Bike Rent, Bike Rent, Rent
Courier E-Bike Rent | CIRGO e-bikes | UK Built, Engineered & Support
File Info : application/pdf, 5 Pages, 721.43KB
DocumentDocumentMaintenance 1. Check tyres pressure If you can push down on them with your thumb, then they need pumping up. Action: Use a bike pump to inflate the tires to the recommended pressure range of 40-60psi. 2. Check brakes Squeeze the brake levers and check the brakes are working and no grinding sound. Also, glance down at the brake disc to check they are aligned with the brake calliper. Action: Check and align the brake disc with the brake calliper. 3. Check quick release and bolt Be sure any quick release and bolts are firmly secured. Action: With one hand, open and close the quick-release lever while gradually tightening the adjusting nut clockwise. Continue tightening the adjusting nut until you feel resistance from the lever when it reaches a parallel position with the hub. Grip the front fork with your fingers and use the palm of your hand to apply force to the quickrelease lever. It should require considerable force to fully tighten the lever. 4. Check saddle and seat clamp Check it is held secure and aligned straight. Action: Tighten the saddle clamp if loose. Tighten the left and right nuts x2 on the saddle and ensure that the saddle is positioned on a straight horizontal line. Every ride Every ride Every ride 5. Check tyre Check for worn or cracked tyres. Action: Contact Circtech at 020 8087 0287. 6. Wheels Assessment Give them a spin and check they don't wobble side to side majorly. Also, check the rims are not damaged or heavily worn. Action: Contact Circtech at 020 8087 0287. 7. Check Battery Holder Check for looseness of the battery holder or any missing fasteners. Action: Tighten any loose fasteners and replace any missing fasteners. Every 150 miles Every 150 miles Every 150 miles Every 150 miles 8. Handlebars Lift the bike and twist the handlebars. If they turn smoothly and without any resistance, all is well. Also, check for looseness. Action: Tighten any loosen fasteners. 9. Check pedals and cranks Try to wobble them and check they are held firmly. Action: Tighten any loosen fasteners. 10. Check the frame Inspect the frame for any cracks or major dents. Also, check cables for any fraying. Action: Contact Circtech at 020 8087 0287. 11. Inspect accessories Check for loose accessories such as the rear rack. Action: Tighten any loosen fasteners. 12. Disc Brake Check for loose brake lever. Action: Fix it with local mechanic. 13. Check Lights Check the front, rear and brake light is working. Action: Connect any loose connector or contact Circtech at 020 8087 0287. Every 150 miles Every 150 miles Every 150 miles Every 150 miles Every 150 miles Every 150 miles Download User Manual https://cirgo.bike/manuals/ Important 1. Do not hang the lock on the rear rack. 2. Power off the Battery Pack completely before connecting to or removing it from the Battery Holder. Ensure the charging cap is always closed when riding outdoors. 3. Remove the Battery Pack from the charger as soon as the light turns green. Use only the provided charger to charge the Battery Pack. 4. Icy roads or snow? Risk of accident, falls and accidents. 5. DO NOT expose battery and controller terminals to water. Always keep battery and controller connected especially in the rain. Keep it dry! Rain + electricity = trouble. How to handle Belt System