RCA RCR6473E Universal Remote Control

Introduction

The RCA RCR6473E Universal Remote Control is designed to operate multiple home entertainment devices. This manual guides you through its setup, programming, and advanced features.

Key Functions

• Device Keys (TV, SAT•CBL•STRM, DVD, DVR•AUX1, AUDIO, VCR•AUX2): Select the device mode for control.
• SLOW•ASPECT: Changes aspect ratio on HDTVs or activates slow playback on DVDs/DVRs.
• GUIDE•HOME & MENU: Accesses device menus and guides.
• CLEAR: Exits programming mode.
• Arrow Keys: Navigate menus and guides.
• INPUT & – (dash): Toggles audio/video sources, switches VCR input, or separates digital channel numbers (e.g., 59.1).

Battery Saver: The remote automatically turns off after 60 seconds of inactivity to conserve battery life.

Battery Installation

Requires two AAA alkaline batteries (not included).

1. Remove the battery compartment cover.
2. Insert batteries, matching (+) and (–) marks.
3. Replace the battery cover.

Precautions: Do not mix old and new batteries, or different battery types (alkaline, carbon-zinc, rechargeable). Remove old batteries promptly.

Programming Your Remote

There are four methods to program the remote:

1. Auto Code Search

Automatically cycles through all codes for the selected device type. This is the easiest but can be the slowest method.

1. Manually turn on the device.
2. Press and hold the desired device key (e.g., TV).
3. Simultaneously press and hold the remote’s POWER key until the indicator LED stays on. Release both keys.
4. Point the remote at the device and press SLOW. Wait 5 seconds. If the device turns off, proceed to step 5. If not, press SLOW again to test the next batch of codes. Continue until the device turns off.
5. When the device turns off, press SKIP BACK and wait 2 seconds. If the device turns on, press OK. If not, press SKIP BACK again every 2 seconds until the device turns on, then press OK.

2. Brand Code Search

Searches through codes specific to a selected brand. Faster if your brand is listed.

1. Manually turn on the device.
2. Locate your device’s brand in the Brand Code List and note the corresponding number.
3. Press and hold the desired device key.
4. Simultaneously press and hold the remote’s POWER key until the indicator LED stays on. Release both keys.
5. Press SKIP FWD and wait 2 seconds. If the device turns off, press OK. If not, press SKIP FWD again every 2 seconds until the device turns off, then press OK.
6. Enter the noted brand code number on the remote keypad.

3. Direct Code Entry

Enter a specific code from the provided code list for your brand. This is potentially the fastest method.

1. Manually turn on the device.
2. Locate the correct device section and your brand in the Code List. Note the five-digit codes.
3. Press and hold the desired device key.
4. While holding the device key, enter the five-digit code. The indicator LED will go off after the first digit.
5. If the indicator light stays on after entering the code, programming is successful. If it blinks four times and turns off, the code is invalid or a step was missed; try again.

4. Manual Code Search

Cycles through codes one by one. This can be time-consuming.

1. Manually turn on the device.
2. Press and hold the desired device key.
3. Simultaneously press and hold the remote’s POWER key until the indicator LED stays on. Release both keys.
4. Point the remote at the device and press SKIP FWD. Wait 2 seconds. If the device turns off, press OK. If not, press SKIP FWD again every 2 seconds until the device turns off, then press OK.

Testing for Maximum Functionality

1. Test various functions of the device with the remote.
2. If some functions do not work, repeat the programming method and try a different code from the list or continue the search until the device turns off and then back on, indicating a better code match.

Reassigning DVR•AUX1 and VCR•AUX2 Keys

To control other device types with these keys:

1. Press and hold the key to be reassigned (DVR•AUX1 or VCR•AUX2). The indicator light turns on.
2. While holding the key, press and release the number corresponding to the new device type (1=TV, 2=VCR/DVR, 3=DVD, 4=Audio, 5=SAT/CBL/STREAMER/DTV). The indicator light turns off.
3. Release the key. The indicator light blinks four times and turns off.
4. Follow the programming instructions for the new device type.

Device Type Number Mapping:

• Additional TV: Press 1
• VCR or DVR: Press 2
• Additional DVD: Press 3
• Additional Audio Device: Press 4
• Additional Streaming Player, Satellite Receiver, Cable Box, or DTV Converter: Press 5

Code Retrieval

To record codes for future reference:

1. Press and hold the device key whose code you want to retrieve. The indicator light turns on.
2. While holding the device key, press and hold the INFO•OPTIONS key. The indicator light turns off. After three seconds, it turns back on. Release both keys.
3. Starting with key 1, press and release number keys (1-9, then 0) sequentially. The number that causes the indicator light to blink is the first digit of the code. Record it.
4. Repeat step 4 until all five digits of the code are retrieved.

Note: TV codes start with 1, VCR/DVR with 2, DVD with 3, Audio with 4, and SAT/CBL/STREAMER/DTV with 5.

Advanced Functions

Volume Punch-Through

Allows Volume and MUTE keys to control the TV or the last accessed AUDIO device without exiting the current mode. This occurs automatically.

Advanced Punch-Through

To specify which device (TV or AUDIO) the volume controls should punch through to:

1. Press and hold the device key whose volume commands you want to send (e.g., SAT•CBL•STRM). The indicator light turns on.
2. While holding the device key, press and hold the VOL UP key. The indicator light turns off.
3. After three seconds, the indicator light turns on and stays on. Release both keys.
4. Press and release the device key (TV or AUDIO) to which you want volume to punch through. The indicator light flashes and turns off.

Note: The device key selected in step 4 must be programmed with a TV or AUDIO code. If an invalid key is pressed, the LED blinks four times and turns off.

Important: Once a specific Volume Punch-Through is set, all other devices default to AUDIO. Manually program other devices if needed.

Troubleshooting

• Remote not operating device: Ensure correct mode, no obstructions, and fresh batteries.
• Cannot program remote: Check distance/angle, try different programming methods, ensure combo units are programmed separately, and check batteries.
• Commands not performed properly: Ensure correct mode, device is ready, valid key pressed, and consider using ENTER key for channel entry. Test for maximum functionality with different codes.
• Indicator light not on: Ensure valid key pressed, correct mode, and fresh batteries.
• Remote not changing channels: Ensure correct mode, use ENTER key after channel number, check for obstructions, and aim at IR sensor.
• Device menu not on TV screen: Ensure proper device connection and input selection. Check if menu access is supported by the brand; original remote may be needed.

Warranty Information

Voxx Accessories Corporation provides a Limited Lifetime Warranty on this product to the original retail purchaser. Defects in material or workmanship under normal use will be repaired or replaced at the company’s option without charge for parts and labor. Contact 1-800-645-4994 for warranty service locations.

The warranty does not cover products used outside the US or Canada, is non-transferable, and does not cover installation/removal costs. It is voided by alteration, improper installation, mishandling, misuse, neglect, accident, or mixed battery types. The company’s liability is limited to the purchase price of the product. Implied warranties are limited to the duration of this warranty. Consequential or incidental damages are excluded.

Contact Information

For more information, visit www.rcaaudiovideo.com.

Consumer Help Line: 1-800-420-7968

Regulatory Information

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that no harmful interference is caused and that any received interference is accepted. Modifications not expressly approved could void the user's authority to operate the equipment.

Industry Canada Regulatory Information: CAN ICES-3 (B)/NMB-3 (B)