SUNO™ - SEANO™ Connected switch with neutral (with dimmer option)

1. USE

The Connected switch with neutral, featuring a dimmer option, is configured by default for ON/OFF operation. It can be integrated with one or more wireless lighting controls, allowing dimmer mode activation via the Home + Control app, and can also be used with mechanical push-buttons. This switch provides local or remote control of your lighting. It is designed for easy installation, replacing a standard switch in a minimum 40 mm deep box, and can be fixed using claws and/or screws.

2. RANGE

3. DIMENSIONS (mm)

Diagram showing the physical dimensions of the switch. It includes a front view and a side view of the mechanism. Key dimensions are labeled: A (width) = 72.9 mm, B (height) = 72.9 mm, C (depth) = 45.8 mm, and D (projection) = 12.2 mm. These dimensions correspond to references like 7 221 71 and 7 656 31.

4. CONNECTION

The connection terminals are screw-type. The terminal capacity supports 1 x 2.5 mm² or 2 x 1.5 mm² wires. The required stripping length for wires is 7 mm. A 3 mm flat screwdriver is recommended for connections.

5. OPERATION

The switch features an integrated time delay for up/down inversion, set at 500 ms. A short press on the switch toggles the light ON or OFF. A long press activates the dimming function. An LED indicator is present, which is useful during installation. This LED can be configured as a blue illumination function (acting as a locator and/or indicator) via the Home + Control app. A SETUP/RESET button is also included; refer to the product manual for detailed instructions.

6. TECHNICAL CHARACTERISTICS

6.1 Mechanical characteristics

• Protection against impacts: IK 04
• Protection against solid bodies/liquids: IP 41 (assembled product)

6.2 Material characteristics

• Plate: ABS
• Rocker: ABS
• Colours: White (RAL 9003), Ivory (RAL 1013), painted Aluminium, Black, Dark Grey
• Mechanism casing: PC
• Support: Grey PC (RAL 7016) + metal
• Halogen-free
• UV-resistant
• Self-extinguishing properties: 850°C/30 s for insulating parts holding live parts in place; 650°C/30 s for other insulating components.

6.3 Electrical characteristics

• Voltage: 110-240 V~
• Power: 150 W
• Frequency: 50/60 Hz
• Standby consumption: 0.7 W
• Frequency bands: 2.4 GHz to 2.4835 GHz
• Power level: < 100 mW
• Range: 200 m in unobstructed space; 10 m between products indoors.

6.4 Climatic characteristics

• Storage temperature: 0°C to + 45°C
• Usage temperature: + 5°C to + 45°C

7. MAINTENANCE

Clean the surface with a soft cloth. Do not use acetone, tar-removing cleaning agents, or trichloroethylene. The product is resistant to: Hexane (EN 60669-1), methylated spirit, soapy water, diluted ammonia (10% bleach), window-cleaning products, and pre-impregnated wipes. Caution: Always test any special cleaning products before general use. Do not paint the cover plate.

8. STANDARDS AND APPROVALS

Compliant with installation and manufacturing standards. For more details, see the e-catalogue. Legrand declares that the radio-electric equipment type (Cat. Nos 7 221 71 - 7 222 71 - 7 223 71 - 7 224 71 - 7 656 31 - 7 657 31 - 7 658 31 - 7 659 31) complies with directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website: www.legrand.com/ecatalogue.