CTK Test Report: IK10 Impact Resistance for Hanwha Techwin XNP-6370RH Network Camera
Report No.: CTK-2019-05076
Date of Report: 2019-12-20
Testing Laboratory: CTK Co., Ltd.
Address: (Ho-dong) 113, Yejik-ro, Cheoin-gu, Yongin-shi Gyeonggi-do KOREA, REPUBLIC OF
Contact: Tel: +82-31-339-9970, Fax: +82-31-624-9501
1. Test Summary
Applicant: Hanwha Techwin Co., Ltd.
Applicant Address: Hanwha Techwin R&D center, 6 Pangyo-ro 319Beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 13488 KOREA
Manufacturer: HANWHA TECHWIN (TIANJIN) CO.,LTD
Manufacturer Address: No.11 Weiliu Rd, Micro-Electronic Industrial Park, TEDA, Tianjin, 300385, People's Republic of China
Use of Report: Quality control
Test Sample / Model: NETWORK CAMERA / XNP-6370RH (*N:NT/P:PAL)
Date(s) of Test: 2017-11-07
Test Standard (Method) used: Requested Test Specification of Applicant
Testing Environment: Temperature: (25.0 ± 10.0) °C, Humidity: (50 ± 25) %R.H., Air Pressure: (99.0 ± 2) kPa
Results: Reference test results. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This report shall not be reproduced except in full without the written approval of CTK.
2. Degrees of Protection Provided by Enclosures Against External Mechanical Impacts (IK Code)
2.1 Test Standard: KS C IEC 62262: 2005
2.2 Arrangement of the IK Code:
- Code letters (International mechanical protection): IK
- Characteristic numeral (numerals 00 to 10): 10
2.3 Vertical Hammer Test
2.3.1 Test Equipment
| Equipment | Model | Manufacturer | Serial |
|---|---|---|---|
| Vertical Hammer | 20J | Kingpo | TX028-1 |
2.3.2 Test Conditions
| IK Code | Impact Energy (J) | Equivalent Mass (kg) | Drop Height (mm ± 1%) | Application |
|---|---|---|---|---|
| 00 | Non-protected | - | - | - |
| 01 | 0.14 | 0.25 | 56 | - |
| 02 | 0.20 | 0.25 | 80 | - |
| 03 | 0.35 | 0.25 | 140 | - |
| 04 | 0.50 | 0.25 | 200 | - |
| 05 | 0.70 | 0.25 | 280 | - |
| 06 | 1.00 | 0.25 | 400 | - |
| 07 | 2.00 | 0.50 | 400 | - |
| 08 | 5.00 | 1.70 | 300 | - |
| 09 | 10.00 | 5.00 | 200 | - |
| 10 | 20.00 | 5.00 | 400 | - |
Impact times: Five times for each of the exposed surfaces. (Do not impact more than 3 times in the same spot)
2.3.3 Check Items
- Check the separation of the component.
- Check the visual damage of the product outside.
2.3.5 Test Result
| Characteristic numeral | Remark |
|---|---|
| IK 10 | The enclosure is Scratch (Reference to Page 6 ~ 7) |
3. Manufacturer Information
3.1 Manufacturer's Name
- HANWHA TECHWIN SECURITY VIETNAM CO.,LTD: Lot O-2, Que Vo Industrial Zone extended area, Nam Son commune, Bac Ninh city, Bac Ninh province, Vietnam
- D-TECH CO.,LTD.: 173-25, Saneop-ro, Gwonseon-gu, Suwon-si, Gyeonggi-do, Korea (Suwon Industrial Complex)
4. Model Description
Basic Model: XNP-6370RH
Series Models: PNP-9200RH, XNP-6320RH, XNP-6330RH, QNP-6230RH, HCP-6370RH, XNP-8330RH, HCP-6320RH, XNP-6371RH, XNP-6550RH, XNP-6450RH, XNP-6420RH, HCP-6550RH, HCP-6450RH, HCP-6420RH, KNP-2320RH, KNP-2550RH, XNP-6341RH
Model Differences: Use of the same external shape and materials (case, finishing material, PCB, cable, etc.), differences in electronic parts inside the product.
5. Attachments
5.1 Products
Images of the Hanwha Techwin XNP-6370RH network camera.
5.2 Test Photos
Photographs documenting the setup and execution of the IK impact tests.
5.3 Photos After Test
Visual documentation of the network camera enclosure after undergoing IK impact testing, showing minor scratches or deformation as per the test results.
5.4 Enclosure Dimensions or Impact Point
Detailed diagrams illustrating the physical dimensions of the network camera enclosure and indicating the specific locations on the enclosure where impact tests were performed, with measurements provided in millimeters.
