DIRECTIONS FOR USE

Step 1: Mount the Main Cargo Rack

Place the main cargo rack against the bicycle's seatpost.

Visual Description: The image shows hands positioning the main cargo rack assembly against the seatpost of a bicycle.

Step 2: Secure the Quick Release

Align the quick release mechanism at a right angle and fasten the screw to secure the rack to the seatpost.

Visual Description: Three inset images demonstrate the process of securing the quick release clamp around the seatpost. The first shows the clamp positioned, the second shows it being tightened, and the third shows it fully secured.

Bracket Installation

Each bracket is equipped with a gasket to protect the bicycle frame. Ensure the gasket is placed in the correct position during installation.

Visual Description: An inset image shows a bracket with a black gasket. Another inset image shows a hand using a wrench to tighten screws attaching a bracket to the upper tube at the rear of the bicycle frame.

Support Rod Adjustment

Loosen the screws on the support rod to adjust its length.

Visual Description: An image shows a hand loosening screws on the support rod.

After adjusting the height of the support rod, tighten the screws and washers. Then, re-tighten the screws that adjust the length of the support rod.

Visual Description: An inset image shows the support rod attached to the bicycle frame. Red circles highlight the adjustment points on the support rod. Text indicates that after height adjustment, screws and washers should be tightened, followed by re-tightening the length adjustment screws.