Hama WKM-500 Keyboard and Mouse Set
Product Overview
This document provides instructions for the Hama WKM-500 wireless keyboard and mouse set. It covers setup, connectivity options, and special function keys.
Setup and Pairing
The WKM-500 set supports both 2.4 GHz wireless and Bluetooth connectivity, allowing connection to multiple devices.
Section A: Battery Installation
To install batteries, open the battery compartment on the underside of the mouse and keyboard.
Section B: 2.4 GHz Pairing
- Connect the USB receiver to a USB-A port on your computer.
- Ensure the mouse and keyboard are powered on.
- The devices should automatically pair with the receiver. If not, follow the on-screen prompts or refer to the device-specific pairing instructions.
Visual Description: An illustration shows a computer with a USB receiver being plugged into a USB-A port. Another illustration shows the underside of the mouse with the battery compartment open, and a third shows the keyboard with the Fn key and F10/F11 keys highlighted, indicating a pairing sequence.
Section C: Bluetooth Pairing
- Ensure the mouse and keyboard are powered on.
- Activate Bluetooth pairing mode on the mouse and keyboard by pressing and holding the designated pairing button (often indicated by a Bluetooth symbol) for 3-5 seconds.
- On your computer or device, search for available Bluetooth devices and select the Hama keyboard and mouse.
- Confirm the pairing if prompted. The indicator lights on the devices will show a successful connection.
Visual Description: Illustrations show the underside of the mouse with the pairing button activated, emitting a light. The keyboard shows the Fn key and F2/F10/F11 keys highlighted, indicating a Bluetooth pairing sequence. Wireless signal waves are depicted connecting the devices.
Section D: Operating System Selection
The keyboard can be configured for different operating systems. Press and hold the 'Fn' key in combination with the 'Q' key for Android, 'W' key for Windows, or 'E' key for macOS, iOS, and iPadOS.
Visual Description: Diagrams show the 'Fn' key combined with 'Q' (Android), 'W' (Windows), and 'E' (macOS, iOS, iPadOS) keys, with corresponding operating system logos.
Switching Between Devices
The WKM-500 allows seamless switching between connected devices.
USB Connection
To switch to the USB-connected device, press the corresponding button (indicated by 'USB' and a USB symbol).
Bluetooth Connections
The set supports two Bluetooth connections (BT 1 and BT 2). Press the button indicated by 'BT 1' or 'BT 2' to switch to the respective paired device.
Visual Description: Circular diagrams illustrate the switching process. One shows switching between USB, BT 1, and BT 2 for the keyboard. The other shows switching between 2.4 GHz, BT 1, and BT 2 for the mouse.
Function Key Operations
The 'Assist' key activates the AI assistant on your device.
The 'Fn' key, when pressed in combination with other keys, provides access to special functions:
- F1: [Home Page]
- F2: [Back]
- F3: [Forward]
- F4: [Refresh]
- F5: [Volume Down]
- F6: [Volume Up]
- F7: [Mute]
- F8: [Settings/Gear]
- F9: [Brightness Down]
- F10: [Brightness Up]
- F11: [Calculator]
- F12: [Lock Screen]
Visual Description: A diagram shows the keyboard layout with function keys F1 through F12 and the 'Assist' key, each with an associated icon representing its function.
DPI Settings
The mouse sensitivity (DPI) can be adjusted by pressing the DPI button located on the underside of the mouse. The available DPI settings are 800, 1200, and 1600.
Visual Description: An illustration of the mouse shows the DPI button being pressed. Circular arrows indicate the cycle through DPI settings: 800 DPI, 1200 DPI, and 1600 DPI.
Manufacturer Information
Hama GmbH & Co KG 86652 Monheim / Germany www.hama.com
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Hama's general terms of delivery and payment are applied.