Hama WK-550 Wireless Keyboard

Section A: Initial Setup

Before first use, remove any protective film from the keyboard. A hand is shown peeling a grey tab from the top edge of the keyboard.

Section B: Pairing Mode 2.4 GHz

Connect the included USB receiver to a USB-A port on your computer. The keyboard should automatically pair with the receiver. The diagram shows a computer's rear panel with a USB-A port, and an arrow pointing from the USB receiver to this port. A close-up of the keyboard indicates pairing mode with a flashing indicator light near the 'Rollen Pause' keys.

Section C: Pairing Mode Bluetooth

To pair via Bluetooth, press and hold the designated Bluetooth pairing button (indicated by a [Bluetooth symbol]) for 3-5 seconds. The indicator light will flash. Select the keyboard from your device's Bluetooth settings. The keyboard supports multiple Bluetooth device pairings (BT 1, BT 2).

The diagram illustrates this process: a finger presses a key for 3-5 seconds, initiating wireless transmission. Circular insets show indicator lights flashing next to device selection buttons labeled '2' (BT 1) and '3' (BT 2), both featuring the [Bluetooth symbol].

Section D: Operating System Compatibility

Switch the keyboard's operating system compatibility by pressing the Fn key in combination with specific keys:

• Fn + Q: For Android devices.
• Fn + W: For Windows devices.
• Fn + E: For macOS, iOS, and iPadOS devices.

The diagram shows the 'Fn' key and the 'Q', 'W', and 'E' keys, with their respective operating system names.

Section E: Switching Connections

The Hama WK-550 keyboard can connect to up to three devices simultaneously: one via 2.4 GHz wireless and two via Bluetooth (BT 1, BT 2). To switch between connected devices, press the dedicated connection mode key (indicated by numbered buttons 1, 2, 3). The diagram shows a finger pressing the 'Num' key to cycle through connection modes: 2.4 GHz (Device 1) → BT 1 (Device 2) → BT 2 (Device 3) → back to 2.4 GHz, with indicator lights showing the active connection.

Section F: Function Key Explanations

The Fn key can be used in combination with the F1-F12 keys to access additional functions:

• Fn + Assist: Activates the AI assistant.
• Fn + F1: [Music symbol] (Play/Pause)
• Fn + F2: [Volume down symbol] (Decrease volume)
• Fn + F3: [Volume up symbol] (Increase volume)
• Fn + F4: [Mute symbol] (Mute audio)
• Fn + F5: [Mail symbol] (Open email client)
• Fn + F6: [Globe symbol] (Open web browser)
• Fn + F7: [Settings symbol] (Open settings)
• Fn + F8: [Printer symbol] (Print)
• Fn + F9: [Brightness symbol] (Decrease screen brightness)
• Fn + F10: [Brightness symbol] (Increase screen brightness)
• Fn + F11: [Calculator symbol] (Open calculator)
• Fn + F12: [Star symbol] (Customizable function/shortcut)