Celimed Flex Temp Digital Thermometer
Product Information and Operating Guide
Product Description
The Celimed Flex Temp is a reliable digital thermometer designed for accurate body temperature measurement. It provides quick and easy readings, making it suitable for home health monitoring. The device features a clear LCD display and an ergonomic design for comfortable use.
Operating Instructions
- Power On: Press the ON/OFF button. The thermometer will perform a self-test, and the last recorded temperature may be displayed briefly.
- Prepare for Measurement: Ensure the probe is clean. For oral use, place the tip under the tongue. For axillary use, place the tip in the armpit. For rectal use, lubricate the tip and insert gently.
- Take Reading: Press the ON/OFF button to start measurement. Wait for the audible beep (typically 60 seconds) to signal the end of the measurement cycle.
- Read Temperature: The measured temperature will be displayed on the LCD screen.
- Power Off: Press the ON/OFF button to turn off the device. The thermometer will also automatically shut off after approximately 10 minutes of inactivity to conserve battery life.
Technical Specifications
| Feature | Specification |
|---|---|
| Temperature Range | 32.0°C - 42.9°C (90.0°F - 109.9°F) |
| Accuracy | ±0.1°C (±0.2°F) for temperatures between 35°C and 42°C. |
| Power Source | 1 x 1.5V DC button battery (e.g., LR41) |
| Dimensions | Approx. 125 mm x 20 mm x 12 mm |
| Weight | Approx. 12g (including battery) |
| Storage Temperature | -10°C to +55°C (14°F to 131°F) |
| Operating Temperature | 10°C to +40°C (50°F to 104°F) |
| Display | LCD (Liquid Crystal Display) |
| Measurement Time | Approx. 60 seconds |
| Automatic Shut-off | Yes (approx. 10 minutes) |
Warnings and Precautions
- Read all instructions carefully before using the thermometer.
- Do not use if the probe or casing is damaged.
- Avoid exposing the device to extreme temperatures, direct sunlight, or humidity.
- Keep the thermometer out of reach of children.
- Do not attempt to disassemble or repair the unit. Contact authorized service personnel.
- Clean the probe tip before and after each use.
- Dispose of used batteries according to local environmental regulations.
- This thermometer is not intended for use in potentially explosive atmospheres.
Cleaning and Maintenance
To clean the probe tip, use a soft cloth lightly dampened with water or a mild detergent. For disinfection, use 70% isopropyl alcohol. Wipe the probe and allow it to air dry completely. Do not immerse the entire thermometer in water or any other liquid. Store the thermometer in its protective case in a cool, dry place.
Symbols
CE Mark: This symbol indicates that the product complies with the essential requirements and other relevant provisions of applicable European Union directives.
