Onn. Wireless On-Ear Headphones with Rotating Boom Microphone
Quick Start Guide
The Fine Print
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help? We're here for you every day from 7 a.m.-9 p.m. CST. Give us a call at 1-888-516-2630
Produced for Walmart Inc. Bentonville, AR 72716
Ver. 01 08/11/21
FCC ID: 2ADZH-ONN70290
100070290
We'd love to hear from you. Scan with your smartphone camera and let us know what you think.
onn.
FRONT
Get to Know Your Wireless Headphones
- Model: 100070290
- Speaker Rated Input Power: 10mw
- Speaker Diameter: 30mm
- Speaker Impedance: 320±15%
- Speaker Sensitivity: 100±4dB
- USB-C Charging cable: 6 ft (1.8 m)
What's in the Box?
Check to make sure you have everything below:
- 1 Wireless On-ear Headphones
- 1 USB C Charging Cable 6 ft (1.8m)
- 1 Quick Start Guide
onn.
Let's Get Started! First time set-up
Power On/Off
- Press & Hold 3 sec power on: LED light turns blue.
- Press & Hold 3 sec power off: LED light turns red then off.
Pairing Mode
Press & Hold 5 sec pairing: blue and red LED alternative flashing.
For first time use, power on the headphones, and open bluetooth setting on your device and choose "onn. PC Headset". Product will automatically reconnect to the last paired device when power on next time.
When power off the headphones, press and hold 5 sec for pairing mode automatically.
01 Dual-point connectivity: connect two devices simultaneously
1. When FIRST device connected with "onn. PC Headset", turn off bluetooth in device settings, the bluetooth headphone would go into pairing mode;
2. Enter your SECOND device into bluetooth settings and get it connected with "onn. PC Headset";
3. Turn on your FIRST device bluetooth, it would reconnect with "onn. PC Headset" simultaneously.
02 Enjoy Your Music
- Next Song: [Next Song Symbol]
- Last Song: [Last Song Symbol]
- Volume Up: [Volume Up Symbol]
- Volume Down: [Volume Down Symbol]
03 Take a Clear Phone Call
- Answer/Hang Up: [Answer/Hang Up Symbol]
- Reject Call: [Reject Call Symbol]
- Mute switch: [Mute Switch Symbol]
04 Charge Your Headphones
- Headphones charging: red light on.
- Headphones fully charged: blue light on.
- Charging time: About 2 hours.
- Charging specification: 5V 0.5A
05
Siri/Google Assistant: [Siri/Google Assistant Symbol]
Available Colors
- Black
- ICE
- VERMILLION