Product Description
The PKI 100 is a pole terminal featuring a captive insulated head, held under constant pressure against insulated rings by a spring. It has a 4 mm diameter nickel-plated brass threaded bolt with a 2 mm diameter transverse hole. Designed for non-rotating installation in switchpanels and equipment chassis with a wall thickness up to 3.5 mm.
Product Details
Article No.: 9307571xx
Available Colors:
Technical Data
| Connection | M4 thread |
|---|---|
| Rated Voltage | 30 VAC / 60 VDC |
| Measurement Cat. acc. to IEC 61010 | O (2) |
| Rated Current (consider derating curve) | 35 A |
| Material Socket | brass, nickel plated |
| Housing Material | PA |
| Temperature Range acc. to IEC61010(1) | -25 °C to +100 °C |
| Inflammability Class acc. to UL 94 | V-2 (only valid for basic material of housing) |
Drawing and Dimensions
The drawing shows a side view of the PKI 100 terminal with key dimensions indicated. The total length is approximately 41.5 mm. The main body diameter is approximately 17.5 mm. An installation hole with a diameter of 7.7 mm is shown on the side, suitable for panel mounting.
System: 4 mm system
Installation Hole Diameter: 7.7 mm
Notes
(1) Contact the manufacturer for applications at deviating temperature ranges.
(2) Without rated measurement category, for other circuits that are not directly connected to mains.
Контакт-Шанс | Пожалуй, лучший подарок для Наших Людей в Германии!
Startseite
TCPDF
