Blitzrock CT3 User Manual

Package Contents

• Blitzrock CT3 Headphones x1
• Charging Case x1
• Charging Cable x1
• User Manual x1

Product Introduction

The Blitzrock CT3 headphones feature an ergonomic design for comfortable wear. The package includes the headphones, a charging case, a charging cable, and this user manual.

Key components are identified:

• Touch Area: The sensitive surface on each earbud for control input.
• Headphone Charging Status Indicator: A small LED on the earbud that indicates its charging status.
• Charging Pins: Metal contacts on the earbud that align with the charging case to transfer power.
• Charging Case Status Indicator: LEDs on the charging case showing the case's battery level or charging progress.
• Charging Contacts: The corresponding metal points inside the charging case that connect to the earbud's charging pins.
• Charging Interface: The port on the charging case, typically USB-C, for connecting the power cable.

Important: Always use the provided Type-C Charging Cable for charging.

Charging

1. Step 1: Preparation: Before the first use, remove any insulating sheets or protective stickers from the earbuds.
2. Step 2: Place in Case: Insert the earbuds into their respective slots in the charging case. The status indicator on the earbuds should illuminate, confirming they are charging.
3. Step 3: Charge the Case: Connect the charging cable to the charging case's charging interface and a power source. The case's indicator lights will show the charging status:
   • 1%-25%: One light is on.
   • 26%-50%: Two lights are on.
   • 51%-75%: Three lights are on.
   • 76%-100%: All four lights are on.

   Fully Charged: The indicator lights will turn off when the case is fully charged.

   The charging case typically takes about 2 hours to reach full charge.

Pairing

1. Step 1: Automatic Pairing: Simply open the charging case lid. The earbuds will automatically enter pairing mode.
2. Step 2: Indicator Status: A flashing light on one earbud signifies it is in pairing mode.
3. Step 3: Connect to Device: On your smartphone or other Bluetooth-enabled device, navigate to Bluetooth settings. Turn on Bluetooth and search for available devices. Select "Blitzrock CT3" from the list to establish a connection.
4. Step 4: Connection Confirmation: Once successfully paired, the earbuds are powered on and connected to your device.

Functions

Control your music, calls, and access features like Voice Assistant and Game Mode using the touch-sensitive areas on the earbuds.

Important Notes:

• If you experience audio lag during video playback, activate Game Mode by quadruple tapping either earbud.
• Game Mode is disabled by default.

The touch area is located on the outer surface of each earbud.

Power On/Off

With Charging Case

• Power On: Open the charging case lid.
• Power Off: Close the charging case lid.

Without Charging Case

• Power On: Press and hold the touch area on either earbud for approximately 3 seconds until you hear a confirmation tone or see an indicator light.
• Power Off: Press and hold the touch area on either earbud for approximately 5 seconds until you hear a confirmation tone or see an indicator light.

Troubleshooting

1. Charging Case Not Charging: Ensure the power adapter is functioning correctly and try using a different USB charging cable.
2. Earphones Not Connecting to Bluetooth or Signal Not Found: On your smartphone, go to Bluetooth settings, find "Blitzrock CT3" in the paired devices list, and delete/forget the device. Then, search for Bluetooth devices again and re-pair the earbuds.
3. Earphones Won't Power On: Verify that the charging case has sufficient charge. Place the earbuds in the case and allow them to charge for a period before attempting to power them on again.

Restore Factory Settings

To reset the earbuds to their original factory settings, ensure the headset is turned on. Then, simultaneously touch and hold the touch positions on both the left and right earbuds for six times. The earbud indicator lights will flash white three times, indicating that the reset is complete.

Blitzrock App Pairing

Step 1: Download the Blitzrock App

The Blitzrock application is available for download on both the Google Play Store and the Apple App Store. Search for "Blitzrock" to find and install the app on your smartphone.

Step 2: Bluetooth Pairing

Ensure your smartphone's Bluetooth is enabled. Your Blitzrock CT3 headphones should be discoverable. Select "Blitzrock CT3" from the list of available Bluetooth devices to pair them.

Step 3: Connect via App

Launch the Blitzrock application. Follow the on-screen prompts to connect your paired Blitzrock CT3 headphones. The app provides features such as battery level monitoring for each earbud, equalizer settings, and firmware updates.

Specifications

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.