Package Contents
- Earphones (x1)
- User Manual (x1)
- Charging Case (x1)
- Charging Cable (x1)
Product Introduction
Product Name: Open-ear earphones
Model: CT3 Pro
Bluetooth Version: BT 5.4
Bluetooth Protocol: A2DP, HFP, HSP, AVRCPSBC, AAC
Driver Unit Size: 12mm
Charging Input: USB-C 5V 0.5A
Battery Capacity (Earphones): 55 mAh * 2
Battery Capacity (Charging Case): 500 mAh
Warranty: 12 months
Charging
Charging Interface: USB-C
Charging Case Charging Time: Approximately 2 hours.
Charging Indicator:
- 1%-30%: Red light
- 30%-85%: White light
- 85%-100%: Green light
- Fully charged: Indicator light turns off.
Use the provided Type-C charging cable to charge the case.
The earphones charge when placed inside the charging case. The headphone charge status indicator will turn on.
Pairing
Initial Setup: Remove any insulating film and protective stickers from the earphones before first use.
Automatic Pairing: Place earphones in the charging case. The headphone charge status indicator will illuminate. Automatic pairing occurs when the charging case lid is opened.
Pairing Mode: Enter pairing mode (indicated by a light on one earphone) by opening the charging case lid.
Bluetooth Connection: Open your device's Bluetooth settings and select "Blitzrock CT3 Pro" to connect.
Functions and Controls
Power On/Off:
- To turn on earphones individually: Touch and hold the touch area for 3 seconds.
- To turn off earphones individually: Touch and hold the touch area for 5 seconds.
Game Mode:
- Activate/deactivate game mode by touching and holding the left earphone's touch area. This mode is recommended when audio lag is noticed relative to video. Game mode is off by default.
Voice Assistant: Access voice assistant by performing a double tap on the touch area of either earphone.
Touch Control Areas: Located on the earphones.
Troubleshooting
- Charging Case Not Charging: Check the power adapter and try a different charging cable.
- Earphones Not Connecting to Bluetooth: Open your phone's Bluetooth settings, delete the existing pairing record for "Blitzrock CT3 Pro", and search for the earphones again to reconnect.
- Earphones Not Turning On: Ensure the charging case has power and charge the earphones for a short period before attempting to power them on.
Blitzrock App Pairing
The Blitzrock App can be downloaded from the Apple App Store and Google Play Store.
Steps:
- Open the Blitzrock App and pair it with your Blitzrock CT3 Pro.
- Pair the earphones via Bluetooth with your device.
[App Store Download Badge] [Google Play Download Badge]
Reset to Default Settings
To reset the earphones to factory default settings:
- Place both earphones into the charging case.
- Touch and hold the touch area on the charging case for 8 seconds.
- A confirmation is indicated when the red LED light outside the charging compartment stays on for 1 second, signifying that the reset is complete.
