JBL Tune 510BT Wireless On-Ear Headphones

Introduction

This document provides a user manual for the JBL Tune 510BT Wireless On-Ear Headphones. It covers essential information for setting up and using the product.

What's in the Box

The package typically includes the JBL Tune 510BT headphones and charging accessories. Specific contents may vary.

Power On and Connect

To power on and connect your JBL Tune 510BT headphones:

1. Turn on the headphones. They will automatically enter pairing mode.
2. On your device, go to Bluetooth settings and select "JBL TUNE510BT" to connect.

Manual Pairing

If automatic pairing does not occur, you can initiate manual pairing:

1. Ensure the headphones are powered off.
2. Press and hold the power button for an extended period (e.g., >5 seconds) to enter manual pairing mode.
3. On your device, go to Bluetooth settings and select "JBL TUNE510BT" to connect.

Button Commands

The JBL Tune 510BT headphones feature several buttons for controlling playback, calls, and voice assistants:

• Power Button:
• Press and hold to power on/off.
• Press and hold for pairing mode.
• Volume Buttons:
• Press '+' to increase volume.
• Press '-' to decrease volume.
• Press and hold '+' or '-' to skip to the next or previous track, respectively.
• Multi-function Button:
• Press once to play/pause music or answer/end calls.
• Press twice to activate Siri/Google Assistant/Bixby.

Multi-Point Connection

The JBL Tune 510BT supports multi-point connection, allowing you to connect to two devices simultaneously. Phone calls will always take priority. If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device. To disconnect, select "Forget this device" on your Bluetooth devices.

Charging

To charge your headphones, connect the charging cable to the headphones and a power source. The LED indicator will show the charging status.

LED Behavior

The LED indicator on the headphones provides information about the device's status, such as power, pairing, and charging.

Technical Specifications

• Model: TUNE 510 BT
• Driver Size: 32 mm / 1.26" Dynamic driver
• Power Source: 5 V 1 A
• Weight: 160 g / 0.35 lbs
• Headset Battery Type: Lithium-ion battery (3.7 V / 450 mAh)
• Charging time: 2 hours
• Music Playback Time (with BT on): Up to 40 hours
• Frequency Response: 20 Hz - 20 kHz
• Impedance: 32 ohm
• Sensitivity: 103.5 dB [sound pressure level] at 1kHz 1mW
• Maximum SPL: 95 dB
• Microphone Sensitivity: -29 [decibels relative to 1V/Pa] at 1kHz / Pa
• Bluetooth Version: 5.0
• Bluetooth Profile Version: A2DP v1.3, AVRCP v1.6, HFP v1.7
• Bluetooth Transmitter Frequency Range: 2.4 GHz - 2.4835 GHz
• Bluetooth Transmitted Power: (Not specified)
• Bluetooth Transmitted Modulation: GFSK, π/4DQPSK, 8DPSK
• Maximum Operating Temperature: 45 ° C

For long battery life, fully charge the battery at least every 3 months. Battery life varies depending on usage and settings.

Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Documents / Resources

Related manuals and resources may be available online. For example:

• User manual for JBL TUNE700BT wireless on-ear headphones.
• Quick start guide for JBL TUNE600BT nc.
• User manual for JBL TUNE 750BTNC Bluetooth Wireless Around-Ear Headphones.
• Quick start guide for JBL TUNE750BT NC.
• User manual for JBL wireless headphones.
• Quick start guide for JBL T460BT.

Related Posts

• User manual for the portable waterproof speaker JBL Flip 6
• User manual for the wireless microphone system JBLWIRELESSMICAM

Comments

Users can leave comments and feedback on the product and its manual.