JBL TUNE510BT Quick Start Guide
Welcome to your JBL TUNE510BT headphones.
What's in the Box
Your JBL TUNE510BT package includes:
- JBL TUNE510BT Headphones
- USB-C Charging Cable
- User Manual / Quick Start Guide
Power On & Pairing
Powering On and Automatic Pairing:
Press and hold the power button for more than 2 seconds. The headphones will automatically enter pairing mode.
Manual Pairing:
If the headphones do not automatically enter pairing mode, or if you want to pair with a new device:
- Press and hold the power button for more than 5 seconds until the blue LED flashes.
- On your device, turn on Bluetooth.
- Select "JBL TUNE510BT" from the Bluetooth list to connect.
Controls
Music/Call Control:
- Play/Pause Music: Press the power button once.
- Next Track: Press and hold the '+' button for 2 seconds.
- Previous Track: Press and hold the '-' button for 2 seconds.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Answer/End Call: Press the power button once.
- Activate Voice Assistant (Siri/Google Assistant/Bixby): Double press the power button.
Power Off: Press and hold the power button for more than 2 seconds.
Multi-Point Connection
Your JBL TUNE510BT can connect to two Bluetooth devices simultaneously.
To connect to a second device:
- Ensure music playback is paused on your first device and activate pairing mode on the headphones.
- On the second device, turn on Bluetooth and select "JBL TUNE510BT" to connect.
Switching Between Devices:
- To switch the music source, pause music on the current device and start playback on the other device.
- Phone calls will always take priority.
- If one device disconnects or goes out of range, you may need to manually reconnect to the other device.
- To disconnect from a multi-point connection, select "Forget this device" on your Bluetooth device.
Note: The headphones support a maximum of two connected devices.
Charging
Connect the USB-C charging cable to the headphones and a USB power source.
Charging Time: Approximately 2 hours.
Battery Life: Up to 40 hours of music playtime with Bluetooth on.
Quick Charge: A 5-minute charge provides approximately 2 hours of music playtime.
LED Indicators
- Solid Blue LED: Bluetooth connection established.
- Flashing Blue LED: Bluetooth pairing mode.
- Solid Red LED: Charging.
- LED Off: Fully charged or powered off.
- Flashing Red LED: Low battery.
Technical Specifications
Feature | Specification |
---|---|
Model | TUNE 510BT |
Driver Size | 32 mm / 1.26" Dynamic driver |
Power Supply | 5V - 1A |
Weight | 160 g / 0.35 lbs |
Headset Battery Type | Lithium-ion battery (3.7V / 450 mAh) |
Charging Time | 2 hrs |
Music Playtime with BT on | Up to 40 hrs |
Frequency Response | 20 Hz - 20 kHz |
Impedance | 32 ohm |
Sensitivity | 103.5 dB SPL@ 1kHz 1mW |
Maximum SPL | 95 dB |
Microphone Sensitivity | -29 dBV@1kHz/Pa |
Bluetooth Version | 5.0 |
Bluetooth Profile Version | A2DP v1.3, AVRCP v1.6, HFP v1.7 |
Bluetooth Transmitter Frequency Range | 2.4 GHz - 2.4835 GHz |
Bluetooth Transmitted Power | <8 dBm |
Bluetooth Transmitted Modulation | GFSK, π/4DQPSK, 8DPSK |
Maximum Operation Temperature | 45 °C |
Battery Lifespan Maintenance
To prolong battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.
Regulatory Information
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Manufacturer: Harman International Industries, Incorporated, USA.
Importer (Russia): OOO "HARMAN RUS CIS", Russia.
Warranty Period: 1 year.
Service Life: 2 years.
Service Information: www.harman.com/ru
Technical Support: +7 (495) 777-8900
Authorized Service (Latvia): SIA ELEKTRONIKA-SERVISS, Tadaiķu iela 4, Rīga, LV-1004. Phone: +371 67717060. http://www.elektronika.lv. E-mail: serviss@elektronika.lv
Importer (Estonia): Sandmani Grupi AS, Laki põik 6, Tallinn 12918.
FCC ID: APIJBLT510BT
IC: 215-JCD077
Anatel Approval: This product is approved by Anatel according to regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements. For more information, consult the Anatel website - www.anatel.gov.br. This equipment has no right to protection against harmful interference and cannot cause interference in duly authorized systems.