OneOdio Studio Max 1 Wireless Headphones

Package Contents

• OneOdio Studio Max 1 Headphones x1
• Transmitter M1 x1
• USB Type-C Charging Cable
• User Manual
• Travel Pouch
• 3.5 mm to 6.35 mm audio cable
• 3.5 mm to 3.5 mm audio cable
• 6.35 mm adapter (detachable)

Button Controls

Headphones (Studio Max 1)

The headphones feature several buttons for control:

• 1. Type-C charging port: For charging the headphones.
• 2. Volume up/next track: Press once to increase volume, press and hold for 1 second for the next track.
• 3. Multi-function button (MFB): Used for power on/off, play/pause, answering/ending calls, and rejecting calls.
• 4. Volume down/previous track: Press once to decrease volume, press and hold for 1 second for the previous track.
• 5. Function button "B" (Mode switch button "B"): Used to switch between modes (e.g., Bluetooth and low latency).
• 6. LED indicator: Shows charging status and pairing status.
• 7. 3.5 mm AUX interface: For wired audio connection.
• 8. Microphone port: For voice input.
• 9. 6.35 mm interface: For wired audio connection, often for instruments.

Transmitter (M1)

• 10. Function button on M1: Used for power on/off and checking battery status.
• 11. Power indicator on M1: Shows the power status of the transmitter.
• 12. Charging port & Audio port on M1: For charging and wired audio connection.
• 13. 3.5 mm AUX interface on M1: For wired audio connection.

Charging

• Charging: The red indicator light will be on.
• Fully Charged: The red indicator light will turn off.
• Charging Time: Approximately 2 hours.

Note: Please use a charger with a voltage not exceeding 5V to avoid damaging the headphones.

Functionality (Bluetooth Mode)

Headphone Controls

• Power On: Press and hold the MFB for 2 seconds.
• Power Off: Press and hold the MFB for 3 seconds.
• Play/Pause: Single click the MFB.
• Heavy Bass Mode: Double click the MFB.
• Volume Up: Single click "+".
• Volume Down: Single click "-".
• Next Track: Press and hold "+" for 1 second.
• Previous Track: Press and hold "-" for 1 second.
• Switch Modes: Press and hold the button "B" for 1 second.

Transmitter (M1) Controls

• Power On/Off: Press and hold the power button for 2 seconds.
• Display Battery Level: Single-click the power button.

Phone Controls (Bluetooth Mode)

• Answer/Hang Up Call: Single click the MFB.
• Reject Call: Press and hold the MFB for 1 second.
• Three-way Call Mode:
  • Hang up current call and answer new call: Single click the MFB.
  • Hold current call and reject incoming call: Press and hold MFB for 1 second.
  • Keep current call and answer new call: Double click the MFB.
  • Switch between current call and call on hold: Double click the MFB.

Pairing

M1 Transmitter Pairing

After the headphones and M1 power on, the M1 will automatically connect to the headphones within 1 meter.

Bluetooth Mode Pairing

Note: The headphones are in low latency mode by default when powered on and will switch to Bluetooth mode after you press and hold the mode switch button "B" for 1 second.

• Pairing: Red and blue lights flash alternately.
• Pairing Successful: Blue light flashes.
• Completed: Blue light goes off.
• New Device Connection: With headphones powered off, press and hold the MFB to turn them on for 5 seconds to pair with new devices successfully.

Note: In low latency mode, the headphones and M1 are locked to factory settings by default and do not support re-pairing.

Portable Design

• The headphones can be rotated 90 degrees.
• The headphones are foldable for easy carrying.

AUX Mode

• The 6.35 mm plug is suitable for DJ controllers/instruments, such as mixers, consoles, guitars, electronic drums, pianos, etc.
• The 3.5 mm jack plug is suitable for mobile phones, PCs, laptops, and more.

Precautions

• The headphones come with a 6.35 mm audio cable, which can directly connect to 6.35 mm audio devices, eliminating the need for an additional adapter. When connecting to a guitar, for better performance, please check if your guitar requires a guitar amplifier, effects processor, power amplifier, or sound card.
• Studio Max 1, like many other headphones on the market, may not be compatible with some TVs due to Bluetooth protocol issues. Please consult your TV's brand before purchasing. Specifications are subject to change without notice.
• Do not use the device in dusty, humid, dirty, or near magnetic field locations to avoid internal circuit failure.
• When listening to music or calls, use the minimum volume required to avoid hearing damage. Prolonged exposure to high volume can cause permanent hearing damage.
• Do not use the device while driving as it can be distracting.
• Do not wrap, seal, cover, or use the device in enclosed spaces.
• Keep the device away from heat sources and open flames.
• Do not use external heating devices for drying.
• Avoid strong impacts or vibrations.
• Clean with a clean, dry, soft cloth. Stop use before cleaning.
• Use and store within specified temperature ranges (5-35℃ for use, 5-55℃ for storage). Battery performance is limited below 5℃.
• Store in a ventilated, cool place away from direct sunlight.
• This is not a toy; children must use it under adult supervision. Keep small parts away from children.
• The device contains a non-removable built-in rechargeable battery. Only authorized service centers can replace it.
• Do not disassemble or modify the device; this voids the warranty. Contact authorized service for malfunctions.
• Dispose of the device and accessories according to local regulations and support recycling.
• Comply with regulations in medical facilities where wireless devices are prohibited.
• Radio waves may affect implanted medical devices (pacemakers, cochlear implants, hearing aids). Consult manufacturers for restrictions.
• Maintain at least 15 cm distance from implanted medical devices.
• Using unapproved power supplies or batteries may cause fire or explosion. Use CCC-certified adapters.

Specifications

Warranty Information

The product is covered by a limited warranty. In case of malfunction under normal operating conditions, the product host is covered by a 7-day exchange policy and a one-year warranty from the date of purchase. Accessories like connection cables are not covered under warranty but may be exchanged if defective before sale. The warranty does not cover damage caused by human factors, unauthorized disassembly or repair, force majeure events (flood, fire, earthquake, lightning), loss of warranty card or proof of purchase, or tampering with the warranty card/proof of purchase.

To claim warranty service, the original warranty card and valid proof of purchase are required. Contact customer service for assistance if the warranty card is lost. For eligible exchanges, contact the dealer directly. For repairs, contact designated dealers or after-sales service centers.

Please fill out the warranty card immediately after purchase and return it to the company for better service.

Safety Information

Read and follow the precautions to ensure optimal performance and avoid dangerous or illegal situations.

• Avoid using the device in dusty, humid, dirty, or near magnetic fields.
• Use the minimum necessary volume for listening to music or calls to prevent hearing damage. Prolonged exposure to high volume can cause permanent hearing damage.
• Do not use the device while driving as it can be distracting.
• Do not wrap, seal, cover, or use the device in enclosed spaces.
• Keep the device away from heat sources and open flames.
• Do not use external heating devices for drying.
• Avoid strong impacts or vibrations.
• Clean with a clean, dry, soft cloth. Stop use before cleaning.
• Use and store within specified temperature ranges (5-35℃ for use, 5-55℃ for storage). Battery performance is limited below 5℃.
• Store in a ventilated, cool place away from direct sunlight.
• This is not a toy; children must use it under adult supervision. Keep small parts away from children.
• The device contains a non-removable built-in rechargeable battery. Only authorized service centers can replace it.
• Do not disassemble or modify the device; this voids the warranty. Contact authorized service for malfunctions.
• Dispose of the device and accessories according to local regulations and support recycling.
• Comply with regulations in medical facilities where wireless devices are prohibited.
• Radio waves may affect implanted medical devices (pacemakers, cochlear implants, hearing aids). Consult manufacturers for restrictions.
• Maintain at least 15 cm distance from implanted medical devices.
• Using unapproved power supplies or batteries may cause fire or explosion. Use CCC-certified adapters.

FCC Warning & IC Caution

FCC WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement and can be used in portable exposure condition without restriction.

IC Caution: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. (French translation also provided in original document).

RoHS Compliance

The product complies with regulations regarding restricted substances. The table indicates the presence of substances like Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr+6), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE) in various components (circuit board, casing, terminals, accessories). '○' indicates the substance content does not exceed the reference value, and '−' indicates it is an exemption.

Battery Warning

Battery Warning! This product has a built-in lithium battery. Do not expose the product to strong sunlight, fire, or dispose of in fire to avoid explosion.

General Information

For customer service and support, contact OneOdio via email at info@oneodio.com or visit their website at oneodio.com/pages/support. For Japan, visit oneodio.jp/pages/support. Global support is available via phone at + (Mon to Fri 9:00 am-5:00 pm, UTC +8 HKT).

Warranty Terms: The product is subject to China's "Regulations on the Responsibility for Repair, Replacement, and Return of Household Audio-Visual Products" (effective July 23, 2002). The warranty covers 7 days for exchange and one year for repair under normal use, excluding accessories. Specific exclusions apply for damage due to misuse, unauthorized repair, or force majeure.

Customer Data: Fields for customer name, contact number, address, sales address, purchase date, sales unit, and repair notes are provided on the warranty card.