OneOdio A70 User Manual

Important Safety Instructions

Please read and keep all safety and use instructions.

Warnings/Cautions

• Do NOT use the headphones at a high volume for any extended period. To avoid hearing damage, use your headphones at a comfortable, moderate volume level. Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
• Do NOT use your headphones while driving for phone calls or any other purpose.
• Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the headphones to ensure you can hear surrounding sounds, including alarms and warning signals. Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.
• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact OneOdio customer service.
• Remove headphones immediately if you experience a warming sensation or loss of audio.
• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
• Do NOT use the headphones as aviation communication headsets except in case of emergency.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3. ⚠️
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. ?
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

Regulatory Information

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by YI ZHAO (SHENZHEN) CO., LIMITED could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter. Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII According to "Management Regulation for Low-power Radio-frequency Devices" without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

DON'T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Oneodio retailer or other qualified professional for removal.

CE Declaration: YI ZHAO (SHENZHEN) CO.,LIMITED. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.oneodio.com

For Europe:

Frequency band of operation: 2400 to 2483.5 MHz:

Bluetooth: Maximum transmit power less than 20dBm EIRP.

Please dispose of used batteries properly, following local regulations. Do not incinerate. ♻️

Regulatory Information on electrical and electronic equipment:

The following notice is aimed at private end users who use electrical and/or electronic devices.

1. Separate collection of old devices: Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old devices must collect them separately from unsorted municipal waste. In particular, old devices do not belong in household waste, but in special collection and return systems.
2. Batteries and rechargeable batteries: As a rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device from it before handing them over to a collection point. This does not apply if the old devices are handed over to public waste disposal authorities and are separated there from other old devices in order to prepare them for reuse.
3. Options for returning old devices: If you own old devices, you can hand them over to the options set up and available by public waste disposal authorities for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point.
4. Privacy Notice: Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.
5. Meaning of the crossed-out dustbin symbol: The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life. ?️

The crossed-out wheeled bin symbol on batteries or accumulators means that they must not be disposed of with household waste at the end of their useful life. If batteries or accumulators contain mercury (Hg), cadmium (Cd) or lead (Pb), you will find the respective chemical symbol below the symbol of the crossed-out garbage can. You are legally obliged to return old batteries and accumulators after use. You can do this free of charge at a retail store or at another collection point near you. Addresses of suitable collection points can be obtained from your city or local government.

Batteries may contain substances that are harmful to the environment and human health. Particular caution is required due to the special risks involved in handling lithium-containing batteries. The separate collection and recycling of old batteries and accumulators is intended to avoid negative effects on the environment and human health.

Please avoid generating waste from old batteries as much as possible, e.g. by giving preference to batteries with a longer lifespan or rechargeable batteries. Please avoid littering public spaces by not leaving batteries or battery-containing electrical and electronic devices lying around. Please explore ways to recycle a battery instead of disposing of it, such as reconditioning or repairing the battery.

Toxic or Hazardous Substances or Elements

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

Charging temperature range: 0° C – 45° C

Discharging temperature range: -20° C – 60° C

Distributors

EC REP

C&E Connection E-Commerce (DE) GmbH

Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany

Tel. +4906927246648

E-Mail: info@ce-connection.de

UK REP

APEX CE SPECIALISTS LIMITED

Add.: 89 Princess Street, Manchester, M1 4HT, UK

Tel. +441616371080

E-Mail: info@apex-ce.com

Manufacturer Information

Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED

Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural And Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen.

UK Declaration of Conformity

Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type Y80B is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: www.oneodio.com

Safety Warnings:

• Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. ?
• Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
• The device complies with RF specifications when the device used at 0mm form your body.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Package Contents

EN: OneOdio Fusion A70 headphone, USB-C charging cable, 3.5 mm audio cable, 6.35 mm to 3.5 mm dual-duty cable, Pouch, User guide

DE: OneOdio Fusion A70 Kopfhörer, USB Type C Ladekabel, 3,5 mm Audiokabel, 6,35 mm auf 3,5 mm Kabel, Tragetasche, Benutzerhandbuch

FR: Casque OneOdio Fusion A70, Câble de charge USB-C, Câble audio 3,5 mm, Câble double usage de 6,35 mm à 3,5 mm, Pochette, Mode d'emploi

JP: A70ヘッドホン本体, 2mカールコード(伸長時約3m), マイク付き1.2mストレートコード, USB TYPE C 充電ケーブル, キャリーポーチ, 取扱説明書

IT: Cuffie OneOdio Fusion A70, Cavo di ricarica USB-C, Cavo audio da 3,5 mm, Cavo dual-duty da 6,35 mm a 3,5 mm, Custodia, Guida per l'utente

ES: Auriculares OneOdio Fusion A70, Cable de carga USB-C, cable de audio de 3,5 mm, Cable de doble función de 6,35 mm a 3,5 mm, Bolsa, Guía del usuario

Button Controls

Product Overview:

1. USB-C charging port

2. Volume up / Next track

3. Multi-function button (MFB)

4. Volume down / Previous track

5. 3.5 mm aux port

6. LED indicator

7. Built-in microphone

8. 6.35 mm port

Charging

Charging: Red light on

Full charge: Blue light on

Charging time: ≈ 2.5 h

Note: Please use a charging adapter with a voltage not exceeding 5 V to avoid damaging the headphones. ⚡

Music Controls

• Play / Pause: Press the MFB once ▶️
• Previous track: Press and hold "-" for 1 second ⏪
• Next track: Press and hold "+" for 1 second ⏩
• Volume control: Press "+" or "-" ?

Power / Phone Controls

• Power ON: Press and hold for 2 seconds ?
• Power OFF: Press and hold for 3 seconds ?
• Double-click the MFB to activate the Siri voice control function. ?️

Pairing

Step 1: Press and hold the multi-function button for 2 seconds until the LED flashes red and blue alternately to enter pairing mode. ??

Step 2: Open the Bluetooth on your device and select "OneOdio A70". The LED flashes blue to indicate a successful Bluetooth connection. ✅

Pairing for 2 Devices

Step 1: Pair phone 1 and then disconnect phone 1 that is already connected.

Step 2: Pair phone 2.

Step 3: Reconnect phone 1 to the headphone. Switch use between two Bluetooth devices.

Headphone Design

• 90° Rotatable ?
• Foldable ?

Cable 1: 6.35 mm to 3.5 mm

Use:

• 6.35 MM jack for DJ controller / instrument such as mixer, console, mixer, guitar, e-drum, piano, etc. ?
• 3.5 MM jack for mobile phone/PC/laptop, etc. ?

Cable 2: 3.5 mm to 3.5 mm audio cable with microphone

Use:

• 3.5 mm jack for mobile phone/PC/laptop/PS4, etc. ?
• Notes for Microphone:
• Built-in mic on headphone only works in Bluetooth mode.
• In-line mic comes with 3.5 mm audio cable works in wired mode.
• A70 is suitable for daily phone calls / online chats, but if you frequently make calls, you should consider using a specialized headset for this purpose.

Specifications

Notes:

• Specifications are subject to change without notice.
• Headphones include 6.35mm audio cable for direct connection to 6.35mm devices without adapter. For guitar connection, check if additional equipment is needed.
• A70 may not be compatible with some TVs due to Bluetooth protocol issues. Please consult TV brand before purchasing.

Limited Warranty

Our friendly customer service team are ready and waiting to help. Here is how you can contact us:

• Global: info@oneodio.com
• Global: oneodio.com/pages/support
• Japan: oneodio.jp/pages/support
• Global: +85269403848 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)

RF Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

US Agent: TRANS-PAC CHINA LLC, Add.: 3715 S 182nd Street, C120 Seatac, WA 98188-9993, Tel.: +1 (818) 818-0538, Email: lisaleeinchina@gmail.com

Made in China

IC: 28237-A70, FCC ID: 2A25A-A70, R 214-105558

Recycling Information (FR): Cet appareil, ses accessoires et piles se recyclent. À déposer en magasin ou en déchéterie. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil ! ♻️