SVAKOM PRIMO User Manual
This manual provides information for the SVAKOM PRIMO product. Please read all instructions carefully before use.
Product Overview
The SVAKOM PRIMO is designed for adult use and offers various vibration intensities and modes. It is made from environmentally friendly silicone and is harmless to the human body.
Package Contents
- Charging Cable
- Manual
- Fabric Pouch
- PRIMO
Getting Started
1. Charging
Before first use, fully charge the device. The charging port is a pinhole.
2. Powering On/Off
Stimulator Operation: Press and hold the 'S' button for 2 seconds to turn the vibrator on or off.
Remote Control Operation: Press the '8' button once to enter/exit heating mode. Press and hold the ' ' button for 2 seconds to enter standby mode. Note: If there is no operation for 10 minutes, the vibrator will automatically turn off. Press the ' ' button once to activate vibration.
3. Vibration Intensity
Stimulator Operation: Press the 'S' button to cycle through vibration intensities.
Remote Control Operation: Click the '+' button to change vibration intensity.
Intensity Levels: L1 (30%), L2 (45%), L3 (65%), L4 (80%), L5 (100%). Default intensity is L3.
4. Vibration Modes
Stimulator Operation: Double-click the 'S' button to switch vibration modes.
Remote Control Operation: Single-click the ' ' button to change vibration mode.
Modes: M1, M2, M3, M4, M5. Default mode is M1.
5. Status Display
- Active Status: Solid white light.
- Vibrator Off: White light flashes three times and then turns off.
- Low Battery: Red light flashes three times and then turns off.
- Charging: Flashing white light.
- Fully Charged: Solid white light.
- Heating Status: Flashing red light.
Safety Information
- Keep out of reach of children and minors.
- Do not use on damaged or irritated skin.
- Avoid sharing the device to prevent illness and infection.
- Be aware of materials to avoid allergic reactions.
- Do not expose to extreme temperatures.
- Follow all safety instructions to avoid injury.
- SVAKOM is not responsible for injuries or damages resulting from improper use.
Care and Maintenance
- Allow the product to cool down after each use before cleaning.
- Clean thoroughly before use with mild, unscented soap and water (below 45°C/113°F).
- Do not use massage oil, hand cream, or silicone-based lubricants as they can damage the product.
- Avoid cleaning agents containing alcohol, gasoline, or acetone.
- Store in a clean, cool, and dry place, away from direct sunlight.
- Store separately to prevent chemical reactions.
Battery Maintenance
- This product uses rechargeable batteries. Charge and discharge new batteries for 2-3 hours for optimal performance.
- Batteries can be charged/discharged over 100 times. Disconnect from charger after full charge to prevent overcharging.
- Fully charged batteries will gradually lose charge when idle.
- Extreme temperatures can reduce battery life and capacity.
- Do not puncture or damage the battery. If damaged, discontinue use.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A74F-SPM-01
International Certifications
SVAKOM products have passed EU ROHS certification and meet EU CE Directive and WEEE Directive. They are considered 'green' products meeting official safety and environmental standards.
Warranty
Each SVAKOM product comes with a 2-year warranty and a 10-year quality guarantee. For warranty claims, please visit www.svakom.com/warranty-claim.
Customer Support
For assistance, please contact customer-service@svakom.com or visit www.svakom.com for more information.
Quality
SVAKOM products surpass European and American standards.