Panasonic RP-HD305B Digital Wireless Stereo Headphones

Introduction

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

For U.S. customers, register online at http://shop.panasonic.com/support.

For questions or support:

• In the U.S.A.: http://shop.panasonic.com/support
• In Canada: www.panasonic.ca/english/support

Panasonic Corporation of North America, Two Riverfront Plaza, Newark, NJ 07102-5490

Panasonic Canada Inc., 5770 Ambler Drive, Mississauga, Ontario L4W 2T3

More detailed operating instructions are available in "Owner's Manual (PDF format)". Download from: https://panasonic.jp/support/global/cs/accessories/oi/rp_hd300b/

Accessories

Please check and identify the supplied accessories.

• 1 x USB charging cord
• 1 x Detachable cord

To order accessories:

• U.S.A.: Refer to "Limited Warranty" on the rear page.
• Canada: Contact the dealer from whom you have made your purchase.

Maintenance

Clean this unit with a dry and soft cloth.

• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, or chemical wipers, as this might cause the exterior case to be deformed or the coating to come off.

Keeping the battery performance

During long periods of disuse, fully charge this unit once every 6 months to maintain battery performance.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Unit Specific Precautions

• Avoid using or placing this unit near sources of heat.
• Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
• Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings and construction sites.
• Keep this unit away from anything susceptible to magnetism. Devices like clocks may not operate correctly.

Allergies

• Discontinue use if you experience discomfort with the ear pads or any other parts that directly contact your skin.
• Continued use may cause rashes or other allergic reactions.

Battery Information

The product is powered by a recyclable lithium-ion battery. For information on how to recycle this battery, please call 1-800-8-BATTERY.

WARNING: To reduce the risk of fire, electric shock, or product damage:

• Do not expose this unit to rain, moisture, dripping, or splashing.
• Do not place objects filled with liquids, such as vases, on this unit.
• Use the recommended accessories.
• Do not remove covers.
• Do not repair this unit yourself. Refer servicing to qualified service personnel.

Regulatory Information

This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: ACJ-RP-HD305B

Model: RP-HD305B

IC: 216A-RPHD305B

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

FCC Note (U.S.A. only): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

Suppliers Declaration of Conformity

• Trade Name: Panasonic
• Model No.: RP-HD305B
• Responsible Party: Panasonic Corporation of North America, Two Riverfront Plaza, Newark, NJ 07102-5490
• Support Contact: http://shop.panasonic.com/support

Canada Only: CAN ICES-3(B)/NMB-3(B)

Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

Siri is a trademark of Apple Inc.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Other system names and product names appearing in this document are generally the registered trademarks or trademarks of their respective developer companies. Note that the TM mark and ® mark do not appear in this document.

Limited Warranty

(ONLY FOR U.S.A.)

Panasonic Products Limited Warranty

Limited Warranty Coverage

If your product does not work properly due to a defect in materials or workmanship, Panasonic Corporation of North America will, for the warranty period starting from the date of original purchase, at its option either repair your product with new or refurbished parts, replace it with a new or refurbished equivalent value product, or refund your purchase price. The decision to repair, replace, or refund will be made by Panasonic.

During the “Labor” warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts. This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.

Mail-In Service--Online Repair Request

To submit a new repair request and for quick repair status, visit our Web Site at http://shop.panasonic.com/support.

When shipping the unit, carefully pack, include all supplied accessories, and send it prepaid, adequately insured, and packed well in a carton box. Include a letter detailing the complaint, a return address, and a daytime phone number. A valid registered receipt is required under the Limited Warranty.

PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures caused by products not supplied by Panasonic, or failures resulting from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use, or service by anyone other than an Authorized Servicer, or damage attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Contact for unresolved issues:

Consumer Affairs Department
Panasonic Corporation of North America
661 Independence Pkwy
Chesapeake, VA 23320

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

(ONLY FOR CANADA)

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use for the period stated below from the date of original purchase. Panasonic Canada Inc. agrees, at its option, to either (a) repair your product with new or refurbished parts, (b) replace it with a new or refurbished equivalent value product, or (c) refund your purchase price.

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product sold by an authorized Panasonic dealer in Canada and purchased and used in Canada. The product must not have been sold “as is” and must have been delivered in new condition in the original packaging.

PROOF OF PURCHASE IS REQUIRED for warranty service, showing date of purchase, amount paid, and place of purchase.

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures caused by products not supplied by Panasonic Canada Inc., or failures resulting from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use, or service by anyone other than an Authorized Servicer, or damage attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

Contact Information:

For product operation and information assistance, please visit our Support page: www.panasonic.ca/english/support.

For defective product exchange within the warranty period, please contact the original dealer.

User Memo:

Model Number: RP-HD305B

Serial Number: [Space for Serial Number]

Date of Purchase: [Space for Date]

Dealer Name: [Space for Dealer Name]

Dealer Address: [Space for Dealer Address]

Telephone Number: [Space for Telephone Number]

Operation

Part Names

• 1: Audio input terminal
• 2: [Sound Button]
• 3: [Info Button]
• 4: [Play/Pause/Skip Button]
• 5: [Volume Down Button]
• 6: Charging terminal (DC IN)
• 7: Power/pairing LED
• 8: [Power/Pairing Button]
• 9: Microphone
• Ear pads
• Raised dot indicating the left side

Charging

The rechargeable battery is not charged initially. Charge the battery before using the unit.

Connect this unit to a computer using the supplied USB charging cord.

• The power/pairing LED lights in red when charging is in progress. It goes out when charging is completed.
• It takes approximately 5 hours to charge the battery from empty to full.
• Ensure terminals are correctly aligned when plugging in/out. Plugging in obliquely or in the wrong direction may cause terminal deformation and malfunction.
• The power cannot be turned on or connected to Bluetooth® devices during charging.
• Ensure the computer is turned on and not in standby or sleep mode.
• Use only the supplied USB charging cord.
• When the battery level is low, the blinking power/pairing LED turns from blue to red. A beep will sound every minute. When the battery runs out, an English guidance message will be heard, and the power will turn off.
• Pressing the [Power/Pairing Button] twice quickly will provide an English guidance message and allow you to check the battery level.

Turning the Power On/Off

To turn the power on: Press and hold the [Power/Pairing Button] for approximately 3 seconds until the power/pairing LED (blue) blinks. A beep will sound, and the power/pairing LED will blink slowly.

To turn the power off: Press and hold the [Power/Pairing Button] for approximately 3 seconds. An English guidance message will be heard, and the power will turn off.

If the unit is not connected to a Bluetooth® device, it will automatically turn off approximately 5 minutes after you stop using it (Auto power off).

Connecting a Bluetooth® Device

Bluetooth® Pairing

1. With the unit powered off, press and hold the [Power/Pairing Button] until the power/pairing LED blinks.
   • For first-time pairing: approximately 3 seconds.
   • For second or subsequent devices: approximately 5 seconds.
2. The unit will search for a Bluetooth® device to connect to, and the power/pairing LED will light alternately in blue and red.
3. Turn on the power of the Bluetooth® device and enable the Bluetooth® function.
4. Select "RP-HD305B" from the Bluetooth® device’s menu.
5. If prompted for a passkey, input "0000" (four zeros).
6. When the power/pairing LED (blue) blinks twice every approximately 2 seconds, pairing (registration) is completed, and a connection is established.
7. If a connection is not established within approximately 5 minutes, the unit will turn off. Perform pairing again.

Connecting a Paired Bluetooth® Device

1. Turn on this unit.
2. Perform steps 2 and 3 of "Bluetooth® Pairing".
3. When the power/pairing LED (blue) blinks twice every approximately 2 seconds, the connection is established.

Using the Headphones [Bluetooth Operation]

Listening to Music

Select and play music on the Bluetooth® device. The unit’s headphones will output the music or audio.

Remote Controlling (Requires AVRCP profile support)

• Play / Pause: Press the [Play/Pause/Skip Button].
• Increase Volume: Press the [Info Button].
• Decrease Volume: Press the [Volume Down Button].
• Forward to next track: Press the [Play/Pause/Skip Button] twice quickly.
• Return to start of current track: Press the [Play/Pause/Skip Button] three times quickly.
• Fast forward: Press the [Play/Pause/Skip Button] twice quickly and hold the second press.
• Fast rewind: Press the [Play/Pause/Skip Button] three times quickly and hold the third press.

The volume can be adjusted in 31 levels (16 levels during calls). A beep sounds at maximum or minimum volume.

Selecting the Sound Mode

This changes the sound quality of the music or video being played back.

Press the [Sound Button] on this unit. Each press changes the sound quality:

• Bass Enhancer: Produces a more dynamic sound effect with enhanced bass.
• Clear Voice: Produces a sound effect that makes human voices, such as vocals and dialogues, clear to listen to.
• OFF: Turns off sound effects.

The setting immediately before the power is turned off is stored. Audio guidance notifies you when the mode is switched. This may not be effective depending on the music or video.

Making a Phone Call

1. Press the [Play/Pause/Skip Button] on the unit to answer an incoming call.
2. To reject an incoming call (HFP only), press the [Play/Pause/Skip Button] twice quickly.
3. Start talking.
4. Press the [Play/Pause/Skip Button] to end the phone call.

Note for phone calls:

• It may be difficult to hear conversations in locations with loud ambient noise or strong winds. Change the calling location or switch the calling device to the Bluetooth® enabled phone to continue the call (press [Play/Pause/Skip Button] twice quickly to switch).
• You can use the unit's microphone and an app on your Bluetooth® enabled phone to make phone calls.

Activating Voice Functions

You can use a button on this unit to activate Siri or other voice functions on your smartphone or similar device.

Press and hold the [Play/Pause/Skip Button] on this unit until the voice function is activated.

Using the Detachable Cord

When the power is turned off or the battery is depleted, this unit can be used as normal headphones by connecting the supplied detachable cord.

• Connecting the detachable cord when connected via Bluetooth® will turn the power off.
• Noise may occur due to dirt on the plug. Clean the plug with a soft dry cloth if this occurs.
• Do not use any other detachable cords except the supplied one.

Restoring to Factory Settings

Charge the battery before restoring the unit.

1. While the power is off, press and hold the [Power/Pairing Button] for at least 5 seconds until the power/pairing LED lights alternately in blue and red.
2. While the power/pairing LED is lighting alternately in blue and red, press and hold the [Info Button] and [Volume Down Button] simultaneously for at least 5 seconds.

The default settings will be restored after the power/pairing LED (blue) blinks fast and the unit turns off. When pairing a device again, delete the registration information (Device: "RP-HD305B") from the Bluetooth® device’s menu, and register this unit again.

Battery Removal and Disposal

The following instructions are for disposal purposes only and not for repair. The unit is not restorable once disassembled.

• When disposing of this unit, remove the installed battery and recycle it.
• Disassemble after the battery runs out.
• Keep disassembled parts out of reach of children.

Handling of Used Batteries

• Insulate the terminals with adhesive tape or similar material.
• Do not disassemble.
• Do not heat or expose to flame.
• Do not leave batteries in a car exposed to direct sunlight for a long period with doors and windows closed.
• Battery mishandling can cause electrolyte leakage, which can damage items the leaked fluid contacts. If electrolyte leaks, consult your dealer. Wash thoroughly with water if electrolyte contacts any part of your body.
• When disposing of batteries, contact your local authorities or dealer for the correct disposal method.

To remove the battery:

1. Insert a flat-head screwdriver into the groove on the outward-facing side of the left headphone.
2. Use the flat-head screwdriver to pry up the cover.
3. Remove the battery and cut off the wires one by one with scissors.

Troubleshooting

Before requesting service, perform the following checks. If you are in doubt or if the remedies do not solve the problem, refer to the "Customer Services Directory" (U.S.A.) or "CONTACT INFORMATION" (Canada) on the front page.

• No sound: Ensure the unit and Bluetooth® device are connected correctly. Check if music is playing on the Bluetooth® device. Ensure the unit is on and the volume is not too low. Pair and connect the devices again. Check if the Bluetooth® compatible device supports the "A2DP" profile. If multiple Bluetooth® devices are nearby, ensure connection to the correct one.
• Low volume: Increase the volume of the unit. Increase the volume on the Bluetooth® device.
• Sound from the device is cut off / Too much noise / Sound quality is bad: Sound may be disrupted if signals are blocked; do not cover the unit with your hand. The device may be out of the 10 m (33 ft.) communication range; move the device closer. Remove any obstacles between the unit and the device. Switch off any wireless LAN device when not in use.
• The device cannot be connected: Delete the pairing information for this unit from the Bluetooth® device, then pair them again.
• You cannot hear the other person: Ensure the unit and the Bluetooth® enabled phone are turned on and connected. Check the audio settings of the phone; switch the calling device to the unit if it is set to the phone. If the other person’s voice volume is too low, increase the volume on both the unit and the phone.
• Cannot make a phone call: Check if the Bluetooth® compatible device supports "HSP" or "HFP" profile. Refer to the manual for details on profiles.
• The unit does not respond: Reset the unit by connecting it to a computer using the USB charging cord. (Pairing device information will not be deleted.) The power cannot be turned on when the detachable cord is connected.
• Cannot charge the unit: Check if the USB port is working properly; try another USB port. Unplug and re-plug the USB charging cord. If charge/operating time is shortened, the battery may be depleted (approx. 300 charging times).
• Power/pairing LED does not light during charging / Charging takes longer: Ensure the USB charging cord is firmly connected. Charge in a room temperature between 10 °C and 35 °C (50 °F and 95 °F).
• The power does not turn on: Ensure the unit is not being charged. The power cannot be turned on when the detachable cord is connected.
• The audio guidance language has changed: The audio guidance language can be switched between English and French by pressing and holding the [Volume Down Button] and [Power/Pairing Button] for at least 5 seconds.

Specifications

*¹ Operating time may be shorter depending on operating conditions.

*² Time required to charge the battery from empty to full.

Specifications are subject to change without notice.