Byron DIC-215 Range Wireless Audio Doorphone: Installation and User Guide
Box Content
The package for the Byron DIC-215 Range Wireless Audio Doorphone typically includes:
- Indoor Unit
- Outdoor Unit (Doorbell)
- Mounting Plate
- Power Adapter
- User Manual
- Screws & Plugs
Diagram Description: Illustrations show the indoor unit, outdoor unit, mounting plate, power adapter, manual booklet, and a bag containing screws and plugs.
Parts Description
Indoor Unit
The indoor unit is the main control and communication device, featuring a speaker and controls for operation.
Diagram Description: An illustration of the indoor unit, highlighting its design and potential button placements.
Outdoor Unit (Doorbell)
The outdoor unit is the doorbell component, designed for mounting outside a door, featuring a call button and a speaker/microphone grille.
Diagram Description: An illustration of the outdoor doorbell unit, showing the call button and speaker/microphone area.
Electrical Installation
Connecting the AC Power Adapter (Indoor Unit)
To power the indoor unit, connect the provided AC power adapter to a wall socket and then plug it into the indoor unit.
Diagram Description: A hand is shown plugging a power adapter into a wall socket, and then connecting the adapter to the indoor unit.
Insert Batteries (Indoor Unit)
The indoor unit can also be powered by batteries. Insert 6 AA batteries into the designated battery compartment, ensuring correct polarity (+/-).
Diagram Description: A hand is shown opening the battery compartment of the indoor unit and inserting 6 AA batteries, with a visual indication of correct polarity.
Connecting the AC Power Adapter
Connect the AC power adapter to a standard wall electrical outlet.
Diagram Description: An illustration shows a power adapter being plugged into a wall socket.
Connecting a Doorlock
For door unlocking functionality, connect the appropriate wires from the door lock mechanism to the designated terminals on the outdoor unit or indoor unit as per wiring diagrams (not detailed here).
Diagram Description: A diagram shows electrical wires being connected to a door lock mechanism.
Pairing
Pairing the Indoor and Outdoor Unit
To establish communication, the indoor and outdoor units need to be paired. Follow the on-screen prompts or button sequences indicated in the manual to complete the pairing process.
Diagram Description: Arrows suggest a wireless connection or pairing process between the indoor and outdoor units, possibly involving button presses on both devices.
Installation
Follow these steps to install the outdoor unit:
- Step A+B: Prepare the mounting location. Attach the mounting plate to the wall. This may involve drilling holes.
- Step C: Use a drill to create holes in the wall where the outdoor unit will be mounted.
- Step D: Insert wall plugs into the drilled holes.
- Step E: Secure the mounting plate to the wall using screws, ensuring it is firmly attached.
- Step F: Attach the outdoor unit to the mounted plate.
- Step G: Secure the outdoor unit, often with a small locking screw.
- Step H: Connect the door lock wiring to the outdoor unit if applicable.
Diagram Description: A sequence of illustrations (A through H) demonstrates the physical installation process: attaching a mounting plate, drilling holes, inserting wall plugs, screwing the plate to the wall, mounting the outdoor unit, securing it, and connecting door lock wires.
Use
Set Melody
Select your preferred ringtone melody by interacting with the controls on the indoor unit.
Diagram Description: A hand is shown operating buttons on the indoor unit, likely to select a melody.
Set Ringtone Volume
Adjust the volume of the ringtone to your desired level using the volume control on the indoor unit.
Diagram Description: A hand is depicted adjusting a volume control or slider on the indoor unit.
Talk
Press the talk button on the indoor unit to initiate or respond to a conversation with visitors at the door.
Diagram Description: A hand is shown pressing a button on the indoor unit, labeled or implied for 'Talk'.
Internal Call
Make an internal call to other compatible indoor units within the system by pressing the designated button.
Diagram Description: A hand is shown pressing a button on the indoor unit, indicated for making an internal call.
Unlock Door
Press the unlock button on the indoor unit to remotely operate the door lock mechanism and grant access.
Diagram Description: A hand is shown pressing a button on the indoor unit, labeled or implied for 'Unlock Door'.
