Instructions for Use

This guide provides essential instructions for the proper use and setup of your wireless doorbell system. Please follow these steps carefully to ensure optimal functionality.

1. Surface Preparation: Ensure the mounting surface is clean and dry before attaching the door pusher. Improper cleaning may result in the door pusher not adhering correctly. The door pusher can be attached to the wall using two methods.
2. Battery Installation: Verify that the battery is correctly inserted and making proper contact with the battery connectors. Secure the battery cover firmly against the battery compartment.
3. Pairing the Door Pusher and Bell:
   1. Insert the batteries into the door pusher.
   2. Press and hold the melody selection button for approximately 3 seconds. You should hear a series of beeps.
   3. Within 30 seconds of the beeps, press the door pusher.
   4. The bell will play a melody to confirm successful pairing.

For further assistance or product information, please refer to the official Byron website or consult the full product manual.