Newtech | Innovative Bathroomware Products & Design in New Zealand
Instruction Manual for newtech models including: milu odourless PIR Motion Sensor 12V, milu odourless, PIR Motion Sensor 12V, PIR Motion Sensor, 12V Motion Sensor, Motion Sensor
PIR Sensor 12V
File Info : application/pdf, 3 Pages, 175.19KB
DocumentDocumentBATHROOMWARE DESIGN & INNOVATION Installation Instructions Milu PIR Motion Sensor, 12V PRODUCT OVERVIEW The Expella PIR motion sensor incorporates advanced technology to automatically activate a Milu odourless toilet when motion is detected. The sensor field of view has been designed to function within a small space to isolate the operating zone to a 2m range. This minimises false triggers. Once motion is detected the odourless fan switches on. While motion is present the fan stays on. When no motion is present, the fan runs on for a period of 5 minutes before turning off. www.newtech.co.nz | 0800 728 662 | sales@newtech.co.nz Tools Required - 70mm hole saw Procedure The PIR Motion sensor installs electrically in-line with the odour control fan and fan power supply (transformer) Locate a position in the ceiling above the toilet. The sensor should be located within a 0.35 meter radius above the toilet pan. Ensure there are no structural members in this location that inhibit installation. Location should be in reach of the 12V transformer cable and fan power cable/connector used to power the odourless toilet. Locate hole in ceiling 0.35m radius above toilet centre Cut hole in ceiling - 70mm Connect to power supply (transformer) Connect to fan Feed cables through the hole and install in Ceiling www.newtech.co.nz | 0800 728 662 | sales@newtech.co.nz TEST OPERATION 1. Turn on power supply. Fan will start 2. Leave the room and wait for fan to turn off (approx. 5mins) 3. Enter room and move in to sensing region (approx. 0.5m radius from sensor) 4. Fan should turn on again for 5 mins 5. Sensor may need rotating in the ceiling to better align with the target SPECIFICATION Input/Output Voltage 9-12 VDC Current (max) 1.5 A Sensor Range 0.5m Radius Run on time period 5 mins DIMENSIONS Head Office & Distribution Warehouse 281 Heads Road, Whanganui 06 349 0194 or 0800 728 662 sales@newtech.co.nz www.newtech.co.nz www.newtech.co.nz | 0800 728 662 | sales@newtech.co.nz