HUUM CLIFF Safety Railing Installation Guide

About the CLIFF Safety Railing

The HUUM CLIFF Safety Railing is designed to enhance the safety and aesthetics of your HUUM CLIFF electric sauna heater. This guide provides instructions for installation and maintenance.

Diagram Description

The diagram illustrates the assembly of the safety railing onto the HUUM CLIFF sauna heater. It shows the heater unit with its internal structure, and the safety railing components being attached using screws and support brackets. The railing forms a protective barrier around the heater's stone compartment.

Installation Instructions (English)

1. Place the support around three ribs of the heater in a way that the outer side of the support is in contact with the heater rod head.
2. Fix the support's two sides with a bolt and a nut. Tighten the bolt so that the support fits snugly around the heater ribs.
3. Place all 8 supports on the heater.
4. Connect wood parts using 4 metal plates.
5. Place the wooden railing on the supports and fasten with screws. Well done!

Maintenance

Maintain the wooden parts of the guardrail with a breathable wood preservative to prolong its life. Use only products made for the sauna. Repeat the maintenance procedures at least once a year, but if you use the sauna often, you should also treat the wood more often.

Company Information