SCHÜTTE WC Seat Installation Guide with Soft Close
Introduction
Dear customer, You have purchased a high-quality and long-lasting product from our line of goods. Please read these instructions carefully before assembling and observe the notes. Therefore, keep the instructions in a safe place and pass them on to possible subsequent owners.
Safety Notes
- Do not stand or sit on the lid. [? sit/stand on lid]
- Caution! Only close the toilet lid by pressing it lightly. Excessive pressure will damage the automatic lowering mechanism! [⚠️ light press for soft close]
- We recommend checking the wing nuts regularly and tightening where necessary. [⚙️ check wing nuts]
Instructions for Care
To prevent the surface from becoming scratched, only wipe with a little soapy water and a soft sponge and dry with a soft cloth.
ATTENTION! Do not use abrasive substances, caustic cleaning agents, disinfectants or sprays with aggressive additives. Use chemical and cosmetic products carefully - some may damage the surface of your toilet seat.
Disposal
Your toilet seat is delivered in a solid packaging, in order to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an environmentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administration about the possibility of an environmentally friendly disposal. [♻️ recycle packaging]
Diagrams and Parts
The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications.
Dimensions
Approximate dimensions: 44.0 cm length, 38.0 cm width.
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| 1 / 6 | Mounting Plate | 2x |
| 2 | Screw | 2x |
| 3 | Rubber Washer | 2x |
| 4 | Nut | 2x |
| 7 | Locking Mechanism Component | 2x |
| 8 | Locking Mechanism Component | 1x |
Assembly Diagrams
Diagram A: Shows the assembly of the mounting hardware. It includes a mounting plate (1), a screw (2), a rubber washer (3), and a nut (4). The plate is placed on the toilet bowl rim, the screw goes through it, then a washer, and is secured with a nut.
Diagram B: Illustrates attaching the WC seat to the toilet bowl. It shows the seat being placed onto the mounting posts, with red arrows indicating how the seat connects to the hinges.
Diagram C: Details the hinge mechanism and soft-close feature. It shows the seat attached to the hinges. A note states "Mounting plates can be rotated if required." [⚙️ rotate plates if needed]. A water drop symbol labeled "H2O" indicates cleaning with water. [? clean with water]
Diagram D: A close-up view of the mounting hardware and how it secures the seat to the toilet bowl. It shows the screw (2), nut (4), and the mounting plate (6) with its locking mechanism (7, 8).
Symbols Explained
- [? sit/stand on lid]: Do not stand or sit on the lid.
- [⚠️ light press for soft close]: Caution! Only close the toilet lid by pressing it lightly. Excessive pressure will damage the automatic lowering mechanism.
- [⚙️ check wing nuts]: We recommend checking the wing nuts regularly and tightening where necessary.
- [♻️ recycle packaging]: Packaging consists of recyclable materials. Dispose of it in an environmentally suitable manner.
- [? clean with water]: Indicates cleaning with water.
