Bose DesignMax DM10S-SUB Wall-Mounted Subwoofer
Technical Data
Product Overview
The 300-watt DM10S-SUB subwoofer delivers rich bass performance, adding powerful low-frequency effects to any commercial sound installation. The wall-mounted DM10S-SUB features a 10-inch woofer and a frequency range of 35 – 125 Hz, and can be locked onto the hidden QuickHold U-bracket. DesignMax subwoofers complement and enhance the performance of any DesignMax loudspeaker.
Key Features
- Combine DesignMax models to match any design, from 2-inch compact models to 8-inch high-SPL compression-driver loudspeakers, and outdoor-installation models. 12 loudspeakers can be mixed and matched.
- Deliver rich bass performance using the woofer; enable Bose Professional DSP and amplifiers to activate Bose Professional loudspeaker equalization and SmartBass processing, expanding performance and response at any volume.
- Elegant appearance integrates into any room design, with speakers featuring a nearly borderless grille (available in black and white) and a removable logo.
- Reduce installation time with the patented QuickHold mounting system, while also reducing stress, hassle, and the risk of product damage.
- Easily install industry-standard accessories, all models include Euroblock connectors; ceiling speakers include the acclaimed rear cover, bridge, and front-access audio connections, making installation and troubleshooting easier.
Technical Specifications
| Single-loudspeaker performance | Bose Professional Extended Life Test (5) | |
| Frequency response (-3 dB) (1) | 41–108 Hz | |
| Frequency range (-10 dB) (1) | 35–125 Hz | |
| Nominal coverage (1–10 kHz) | Below 200 Hz, omnidirectional | |
| Nominal coverage angle (1–10 kHz) | Below 200 Hz, omnidirectional | |
| AES component test (4) | 300 W | Bose Professional Extended Life Test (5) |
| Power handling, long-term continuous | 1000 W | 250 W |
| Power handling, peak | 1200 W | |
| Sensitivity (SPL/1W @ 1m) (2) | 90 dB | 90 dB |
| Calculated max SPL @ 1m | 115 dB | 114 dB |
| Calculated max SPL, peak @ 1m | 121 dB | 120 dB |
| Recommended crossover | 80–200 Hz (active crossover required in DSP) | |
| Recommended high-pass protection | 40 Hz, recommended 18 dB/octave filter | |
| Overload protection | Power reducing resistor network with automatic reset | |
| Transformer taps | 70V: 20, 40, 80, 150W, bypass 100V: 40, 80, 150W, bypass |
|
| Loudspeaker components | One 10-inch woofer (254 mm) | |
| Nominal impedance | 8 ohms (bypass transformer) |
Notes:
- (1) Frequency response and frequency range measured on-axis in a half-space environment with Bose Professional EQ voicing.
- (2) Sensitivity measured on-axis in a half-space environment with Bose Professional voicing.
- (3) Maximum SPL calculated from sensitivity and power handling specifications (excluding power compression).
- (4) AES standard 2-hour duration (IEC system noise).
- (5) Bose Professional extended life test: pink noise, filtered to meet IEC268-5, 6 dB crest factor, 500-hour duration.
- (6) Frequency response shown uses 40 Hz HPF 18 dB/octave and 100 Hz LPF 18 dB/octave.
Enclosure
| Item | Specification |
| Enclosure material | High-density composite, pure color laminate, UV-resistant |
| Grille | Perforated steel, powder-coated finish, paintable, vandal-resistant |
| Logo | Rotating, removable |
| Color | Black: RAL 9005, White: RAL 9003, paintable |
| Environment | Indoor only |
| Safety agency | UL-1480A, S5591/UL certified, NFPA70 compliant, CE marked |
| Operating temperature range | 0 °C to 50 °C (32 °F to 122 °F) |
| Port | 6-pin Euroblock connector, loop-through, rear-mounted. Accepts 18 AWG (0.8 sq mm) to 14 AWG (2.5 sq mm) wire gauges. |
| Hanging/Mounting | QuickHold mounting system, U-bracket included. 2 resettable angle positions: 0°, 90°, for wall or ceiling mounting. 1 rear M8 screw insert for safety tether connection. |
| Dimensions (H × W × D) | 502 x 316 x 323 mm (19.8 x 12.5 x 12.7 in) |
| Dimensions (H × W × D), with bracket | 502 x 316 x 346 mm (19.8 x 12.5 x 13.6 in) |
| Net weight of loudspeaker with grille and bracket | 16.1 kg (35.5 lb) |
| Shipping weight | 18.8 kg (41.5 lb) |
| Included accessories | U-bracket |
| Optional accessories | None |
| Product codes | 831856-0110: DESIGNMAX DM10S-SUB Single, Black 831856-0210: DESIGMAX DM10S-SUB Single, White |
Dimensions
Top View
BRACKET SHOWN IN REAR LOCATION
Front View
GRILLE REMOVED FOR CLARITY
BRACKET SHOWN IN SIDE LOCATION
Right View
DIMENSIONS APPLY TO BOTH SIDES
BRACKET SHOWN IN REAR LOCATION
Rear View
BRACKET ONLY
Rear View
BRACKET SHOWN IN SIDE LOCATION
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS OVER INCHES
2. WEIGHT APPROX 16.05kg [35.40lbs] (SPEAKER ONLY)
WEIGHT W/BRACKET APPROX 16.07kg [35.45lbs]
Bose is a trademark of Bose Corporation.
DesignMax, QuickHold, SmartBass are trademarks of Transom Post OpCo LLC.
All other trademarks are the property of their respective owners.
For more specifications and application information, visit BOSEPROFESSIONAL.COM.
Specifications are subject to change without notice. 05/2023
