BIZEWO JS001 Multifunctional Jump Starter

Product Overview

The BIZEWO JS001 is a versatile, portable device that functions as a car jump starter, a power bank, and a folding lamp. It is designed to start cars with a 12V battery that is losing power and can also serve as a mobile power source for various electronic devices.

Key Features:

• ? Engine Start
• ? Power Bank
• ? SOS Signal
• ⚡ 60W Fast Charge
• ? Outdoor Light
• ? Warning Light

Product Identification

The jump starter unit features several components:

• 1. Power Button: Used to turn the device on/off.
• 2. Power Indicator Light: Shows the current battery level.
• 3. LED Light Button: Controls the integrated LED light functions.
• 4. Car Starting Port: Connection point for the jump starter clamps.
• 5. Output 1: A USB port for charging devices.
• 6. Output 2: Another USB port for charging devices.
• 7. Input/Output: Likely a USB-C port for charging the unit and potentially outputting power.
• 8. LED Light: The integrated LED light source.

Packing List

The package typically includes:

• Jump Starter x1
• Power Adapter x1
• Jump Starter Clamps x1
• USB-C to USB-C Cable x1
• Manual x1
• USB-A to USB-C Cable x1
• Storage Bag x1

How to Use the Product

How to Charge the Jump Starter?

Connect the provided USB cable to the power adapter and then to the USB-C charging port of the jump starter.

Diagram Description: Shows a USB cable connecting a power adapter to the 'Input' port on the jump starter.

How to Jump Start Vehicles?

Note: Before attempting to jump-start a vehicle, ensure all power loads (headlights, radio, air conditioning, etc.) are turned off.

1. Step 1: Plug the blue end of the battery clamps into the jump starter's car starting port.
2. Step 2: Connect the other end of the battery clamps to the vehicle battery. Attach the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal.
3. Step 3: Attempt to start the vehicle. Most vehicles will start immediately. Some may require the JS001 to remain connected for up to 30 seconds. If the vehicle does not start, wait 20-30 seconds and try again. Do not perform more than five consecutive jump starts within a 15-minute period. Allow the JS001 to rest for 15 minutes before attempting another jump start.
4. Step 4: After the vehicle successfully starts, remove the clamps from the battery terminals and then disconnect them from the jump starter.

Other Functions

How to Charge Digital Products?

The jump starter can be used as a power bank. Press the Power Button once to turn on the JS001. Connect your phone, tablet, or laptop using the appropriate USB Out or Type-C Out port and charging cable.

Step 1: Plug the USB port of the charging cable into the product's USB interface (Output port).

Step 2: Insert the other end of the charging cable into the charging port of your mobile phone or digital device.

Step 3: Press the "Power" button to turn on the power supply for charging.

Note on Short-Circuit Protection: The device has an output short-circuit protection function. The output will automatically turn off if a short circuit occurs. After the fault is removed, it needs to be restored by pressing the button or by charging the device.

Basic Parameters

Multifunctional Lighting

How to Use the Lighting Function?

Press the "LED Light" button to turn on the high lighting mode. Short press the button again to cycle through low lighting mode, SOS mode, strobe mode, and warning light mode.

To turn off the LED lamp function, long press the "LED Light" button for 2 seconds.

Diagram Description: Shows a central LED light icon with branches leading to icons representing High light, Low light, SOS, Strobe, and Warning modes.

Folding Lamp Function Display

The integrated lamp can be adjusted to different angles. The diagram shows the lamp capable of rotating approximately 180 degrees and 90 degrees.

Safety Instructions

1. Please strictly follow the instruction manual to operate. Improper use may cause a serious safety incident.
2. Only for starting 12V engines; cannot start vehicles exceeding specified displacement or voltage.
3. To prolong battery life, charge the device after purchase and every three months to ensure it remains in good condition.
4. Do not use a jump starter that has been severely hit, dropped, or damaged.
5. Do not disassemble the jump starter without authorization. Contact professional maintenance personnel for repairs.
6. Do not use the jump starter to start a vehicle while it is charging.
7. Be cautious to avoid metal tools falling onto the jump starter interface, which can cause short circuits, equipment damage, or explosions.
8. Ensure the surrounding area is well-ventilated when using the jump starter.
9. When starting the vehicle, ensure the positive and negative contact points on the cable clamps make good contact with the positive and negative poles of the battery.
10. Sparks and flames contacting the jump starter and engine are forbidden.
11. To prevent sparks from short-circuiting and damaging the jump starter, do not clamp the positive and negative poles of the clamp together or touch the same metal.
12. Do not place the jump starter where children can reach it.
13. Do not expose the jump starter to rain or snow.
14. Do not leave the device in extreme environments for extended periods (temperatures above 122°F/50°C, below 1°F/-10°C, or humidity >80%).
15. Store the jump starter in a cool, dry place and take protective measures if necessary.
16. Charge the product promptly to prevent battery low-voltage or power loss, as prolonged low power status may prevent charging.

Warning

There are no user-serviceable parts. Do not disassemble the power supply without permission. Maintenance should be handled by professional personnel.

Cautions:

1. This product can start a 12V battery engine but not a 24V battery engine.
2. When battery capacity is over 50%, it can start the vehicle quickly; insufficient power may hinder effective starting.
3. Some heating of the unit is normal after starting the engine or using the air pump function (if applicable, though not detailed in this manual).
4. To maximize built-in battery life, charge the jump starter at least once every 3 months.
5. If the jump starter leaks or emits an odor, stop using it and contact support immediately.
6. If a startup fails, wait at least 1 minute before trying again to avoid product damage.
7. After starting the car, wait at least 30 minutes before charging the product.
8. Do not connect the red clamp to the black clamp, as this may cause danger.
9. Use only the original ignition clamps.
10. Keep away from fire and water sources to avoid safety accidents.
11. Do not expose the jump starter to temperatures above 122°F (50°C) or direct sunlight; store it in a cool, dry place.
12. Do not disassemble or modify the product without approved authorization.
13. Do not hit, press, or shake the jump starter, as this may cause fire, explosion, or burning.
14. Do not use chemical cleaning agents to clean the jump starter.
15. This product is not a toy and is forbidden for children to use. It is recommended for users over 16 years of age.

Warranty and Disposal

Every BIZEWO jump starter comes with a 90-day money-back guarantee and a full two-year warranty. For quality issues during the warranty period, BIZEWO will replace the product free of charge. BIZEWO also provides technical support, with after-sales service available to resolve problems promptly.

Disposal

The appliance should not be disposed of via household waste collection. Disposal must be carried out in accordance with national regulations. Improper disposal of electrical appliances can lead to hazardous substances leaking into the environment, affecting health and well-being. Retailers are legally obligated to take back old appliances for disposal when new ones are purchased.

Disposal Symbol: A symbol indicating proper disposal procedures for electrical waste.