Dimension Guide
Fully Integrated Dishwasher
Model Information
Model: EEM48300L
Dimensions
| Width (mm) | Height (mm) | Depth (mm) | |
|---|---|---|---|
| Cut-out (mm) | 600 | 820-900 | 550 |
| Product (mm) | 596 | 818-898 | 550 |
Installation Diagram Description
The diagram illustrates the required cabinet space and the appliance's placement for installation.
Cabinet and Appliance Fit:
- The recommended cabinet cut-out dimensions are 600 mm in width, 820-900 mm in height, and 550 mm in depth.
- A minimum clearance of 550 mm is required at the rear of the cabinet opening.
- The dishwasher unit itself measures 596 mm in width, 818-898 mm in height, and 550 mm in depth.
- An area of 150 mm from the front edge of the cabinet is allocated for services (e.g., water, power), with a 50 mm clearance.
- The base or plinth area allows for adjustment, with a range of 645-776 mm indicated for the sliding mechanism.
- A maximum of 130 mm clearance is needed for the appliance door to open fully.
Appliance Height and Depth Adjustments:
The appliance offers specific height and depth configurations, indicated by the following measurements:
- Height options: 820 mm (*), 900 mm (**), 940 mm.
- Depth adjustment ranges: 40-175 mm (*), 100-235 mm (**), 160-295 mm. These likely correspond to variations in the base or plinth setup, affecting the overall depth or clearance.
Important Note
Dimensions provided are for guidance only. All customers must consult the user manual supplied with the product for comprehensive and detailed installation instructions.
