MPOW IRON VIRTUAL 7.1 Surround Sound Gaming Headset

What's in the Box

• MPOW IRON VIRTUAL 7.1 Gaming Headset
• Detachable Microphone
• USB Cable
• 3.5mm Audio Cable
• Accessory (e.g., cable clip)

Headset Features

• 1. Glasses-Friendly Groove: Designed for comfort with glasses.
• 2. Soft Memory-Protein Earpad: For comfortable long wear.
• 3. Adjustable Headband: Ensures a secure fit.
• 4. Flip-up Mic: Flexible microphone that can be flipped up.
• 5. RGB Light: Customizable lighting effects.
• 6. LED ON/OFF Button: Control for the RGB lighting.
• 7. Mic ON/OFF Button: Mute/unmute the microphone.
• 8. 3.5mm Audio Plug: For direct audio connection.
• 9. USB Plug: For power and digital audio/virtual 7.1 features.
• 10. Volume Control: Integrated dial for adjusting volume.

Compatibility

The MPOW IRON VIRTUAL 7.1 headset is compatible with:

• PC
• PS4 / PS4 PRO / PS4 SLIM
• MAC OS
• Xbox One / Xbox One X

Important Notes:

• For connection with older Xbox One controllers, an additional Microsoft Adapter (not included) is required.
• The microphone functionality is not available on Nintendo Switch.

Virtual 7.1 Surround Sound Setup

To enable the full features of the MPOW IRON Surround Headset, including Virtual 7.1 Surround Sound, download the dedicated software from the MPOW website:

https://www.xmpow.com/drivers

Note: The Virtual 7.1 surround sound feature is exclusively available on Windows PCs after driver installation.

PC Setup for Virtual 7.1:

1. Open your sound settings via the Control Panel.

2. Navigate to 'Sound' settings.

3. Set "USB-BH336A" as the default device for both playback and recording.

Environmental Noise Cancellation (ENC)

The ENC feature helps reduce background noise for clearer communication.

1. This function can be enabled after successfully installing the driver software. It is available only on Windows 7, 8, 8.1, and 10 operating systems.
2. For optimal voice pickup, position the microphone approximately 30-50mm (1.18-1.97 inches) from your mouth.

Platform Setup Guides

PC Setup

Connect the headset via the USB plug to your PC. Open sound settings from Control Panel > Sound and set "USB-BH336A" as the default device for playback and recording.

Mac / Macbook Pro Setup

Connect the headset to the audio port of your Mac. Access 'System Preferences' via the Apple Menu, go to 'Sound', and set "USB-BH336A" as the default device for playback and recording.

PS4 Setup

Connect the headset to the PS4 controller's audio port using the 3.5mm audio cable.

Follow these steps on your PS4:

1. Go to Settings.
2. Select Devices.
3. Choose Audio Devices.
4. Set Input and Output devices to "Headset Connected to Controller".
5. Set "Output to Headphones" to "All Audio".

Xbox Setup

Connect the headset to the Xbox controller's audio port using the 3.5mm audio cable.

Note: An additional Microsoft Adapter (not included) is required for older Xbox One controllers.

Regulatory Information

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.