for KTC models including: , KTC,,KTC,27,inch,Monitor,-,1080P,Monitor,,100Hz,FreeSync,Gaming,Monitor,with,HDR10,VESA,Mountable,,Adjustable,Tilt,,ZeroFrame,Design,,HDMI,VGA,Earphone,Ports,,PC,Monitor,Work,Monitor,for,Office,B0CNRZR62Q,B0CHRC5W6Z,B0CHRCZG2K,B0CP658KM1,B0CJMBYTFS,B0CHRD2827,B0CHRCBC15,B0CP63GQYD,B0CHRPB1X9,B0CHRCX78F,B0CHRPJBG4,B0CHRN6CX7
KTC 23.8 Inch Computer Monitor - FHD 1080p Monitor, 100Hz, FreeSync & G-sync, HDMI, VGA Ports PC Monitor for Working, 3-Side Frameless, HDR10, Visual Presets, Gaming Monitor… : Electronics
KTC 27 Inch Computer Monitor, 1080P Full HD 100Hz Gaming Monitor with HDR10, Freesync, HDMI & VGA Ports, VESA, Tilt Adjustable, Eye Care, Frameless Office PC Monitor, H27V13 : Electronics
User Guide (PDF) KTC KTC,27,inch,Monitor,-,1080P,Monitor,,100Hz,FreeSync,Gaming,Monitor,with,HDR10,VESA,Mountable,,Adjustable,Tilt,,ZeroFrame,Design,,HDMI,VGA,Earphone,Ports,,PC,Monitor,Work,Monitor,for,Office,B0CNRZR62Q,B0CHRC5W6Z,B0CHRCZG2K,B0CP658KM1,B0CJMBYTFS,B0CHRD2827,B0CHRCBC15,B0CP63GQYD,B0CHRPB1X9,B0CHRCX78F,B0CHRPJBG4,B0CHRN6CX7
Important Safety Precautions 1.Please read all the instructions carefully before using the product. 2.When cleaning the display, please unplug the power cord. Please wipe the display with a soft wet cloth instead of liquid or spray cleaner. Please use LCD screen cleaner in case of a stubborn stain. 3.Do not use accessories that are not recommended by the manufacturer, or there may be dangerous. 4.When unplugging the power cord of the display or the power adapter, please hold the power plug with your hand rather than directly pull the power cord to unplug it. 5.Do not place the display near water, such as bathtub, washbasin, kitchen sink, or washing machine. Do not place the display on the wet ground, or near the swimming pool. Do not use fingers or hard objects to press the surface of the LCD screen. 6.The grooves and holes on the shell or at the back and bottom of the display are designed for the ventilation and heat dissipation of the components to ensure reliable operation. So, do not put the display on the bed, sofa, carpet, or other similar surfaces to prevent the heat dissipation holes from blocking and do not place the display near or above the radiator or heater. In addition, do not place the display in an embedded device unless adequate ventilation is provided. 7.Only the power supply type shown on the nameplate can be used for the display. Please feel free to consult the display dealer or the local power supply administration, if you have any doubts about your power supply type. 8For safety, the display or the power adapter uses a power cord with a three-prong plug, whose third prong can only be properly grounded when used with a properly grounded socket. If your socket cannot match with the plug, please contact an electrician to replace your original socket so that the plug can give full play to ensuring safety. 9.As you may face high voltage or other dangers after removing the shell, do not repair the display by yourself. You can have it repaired by qualified maintenance personnel. 10.Please unplug the power cord of the display or the power adapter from the socket, and contact qualified maintenance personnel for repairing the display, when following cases occur: a.The power cord or the plug is damaged or worn out. b.The display has been dropped from high or the shell is damaged. c.Any obvious abnormality indicates a necessary repair. 11.Please place the display in a well-ventilated environment, which is away from strong light, high temperature, or humidity. 12.The room temperature for the display store is -10°Cj60°C, or it may be permanently damaged. Name and Content of Toxic/Hazardous Substances/Elements in the Product Component Toxic/Hazardous Substance or Element (Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE) Display screen × Plastic shell PCBA* × Power cord and cables × Metal parts Packing materials* Loudspeaker (optional) × Accessories* : Indicates that the toxic/hazardous substance in all homogeneous materials of corresponding component is within the content limit specified in GB/T26572-2011. × : Indicates that the toxic/hazardous substance in one or more homogeneous materials of corresponding component is beyond the content limit specified in GB/T26572-2011. To care for and protect the earth better, please send it to a local manufacturer with nationally recognized qualification for recycling according to the national applicable laws and regulations on recycling of waste electrical and electronic products when you no longer need this product or at the end of its service life. The environment-friendly use period of this product is 10 years (see the Marking for the Restriction of the Use of Hazardous Substances in the right figure). Such use period will be maintained, only if you use the product under the normal working conditions specified in the User Guide only. Any questions or comments, please contact us as below support@ktcplay.com [North America] support.eu@ktcplay.com [Europe] For your warranty information, please visit www.ktcplay.com KTC H27V13/H24V13 Display User Guide Please read the User Guide carefully and keep it properly. The pictures involved in the User Guide are for reference only, please refer to the actual product for details. 1. Installing the Base a. Insert the base into the support to fix 1 b. Install the base in the direction of the arrow into the hole position to lock the base 2 2. Removing the Base a. Press down on the snap and push the base back hard 1 2 b. Pinch both sides of the base snap, pull out the bracket with force 4 3 3. Appearance and Functions -5~15° 1. Product Introduction It is a kind of high-performance intelligent multiple frequency scanning display, which adopts active matrix thin film transistor LED-backlit LCD. The display is controlled through the microcomputer MCU digital technology. It is compact and lightweight, which is suitable for narrow working spaces. Before installation, please check whether the following articles are complete in the packing box: - LCD×1 - Power Adapter×1 - Signal Cable(Optional)×1 - Warranty Card×1 - Base×1 - User Guide×1 If any of above product is missing, please contact with product distributor immediately. Notice: Specific accessories in order to prevail in kind. Please keep packing materials for future movement. 2. Display Installation Install on the wall 30cm Install on the base 30cm 10cm 10cm 10cm 10cm 7cm 10cm Ventilation is affected Ventilation Ventilation is affected Wall Please leave the space around the display with the size at least shown in the figure. Do not cover the ventilation holes or insert anything into the shell. Unless there are proper ventilation conditions and adequate ventilation space around the display, do not place the display within a limited space, such as a book cabinet or a built-in closet. Wall -The display should be installed near an AC power socket that can be easily pluggable. -It is recommended to use suitable wall mount brackets or a base for safety purpose. -To prevent injury, the display should be placed on a smooth horizontal plane, or fixed on a firm wall. -If you need to install it on a wall, it should be done by professional technicians. The improper display installation may cause instability. -Do not place the display where it may be suffered from mechanical vibration. -Do not place the display where insects may enter. -Do not place the display directly facing an air conditioner, or the internal panel may condense, leading to faults. -Do not place the display where there is a strong electromagnetic field, or it will be interfered with and damaged by the electromagnetic waves. 3. Display Operation Power indicator Joystick The blue indicator represents the proper functioning of the display; the red flash indicator represents no signal state. Under the energy conservation state, the display will normally work if the signal is provided again. The display is still powered on in the standby state. Thus, unplug the power cord when you do not use the display for safety. Initial Shortcut Keys Shortcut Key for VGA Auto Config Turn on the OSD menu Enter the Function Menu Move Up Move Down Shortcut Key for Brightness Return Previous Menu Shortcut Key for Volume (HDMI source)/ Brightness (VGA source) Open Sub-menu Turn on the display by short-pressing.Turn off the display by pressing and holding for 3 seconds Turn off the display by pressing and holding for 3 seconds 4. Port Description DC HDMI VGA 4.1 Signal Cable Connection Connect the signal cable to the HDMI or VGA signal output port on the PC, then connect the other end of the signal cable to the corresponding signal input port on the LCD. 4.2 Headset Connection After connecting the headset, there will be audio output, and it also supports external loudspeakers. Note: Audio output is available only under HDMI sources 5. Safety Protection When the PC video signal exceeds the frequency range of the display, the display will disable the line and field synchronizing signals to protect the display. Under this circumstance, you must set the output frequency of the PC to an acceptable range for the display to work properly. 7. Simple Problems Disposal Symptoms 6. Power Management System Mode Power Consumption Normal Operation 36W Standby 0.5W Remark: If there is a subtle difference between the User Guide and the actual operation, the latter shall prevail. Disposal Methods 1.Blank screen /Power indicator does not work Check whether the power supply is in good contact with the display and the power socket; and check whether the display is turned off. 2.Blurredtoo large or too small images 3.Dark screen Go to the "Image Settings" category menu and select "Image Auto Adjust" to make the monitor adjust automatically to correct. (Only available for monitors with VGA) Enter the "Brightness & Contrast" menu to regulate the contrast and the brightness of the display. 4.Display overheating 5.Dark/light spots when powered on 6.Image distortion, flashing, shaking 7.Noisy signal when powered off Leave at least 5cm of ventilated space around the display. Do not place articles on the display. It is normal. Because of the temperature difference in the environment, the backlit tube emits uneven light at the initialstage after the display turns on. However, the backlit tube will emit normal light after 20 minutes, and the dark/light spots will be eliminated at that time. Check your computer configuration, choose the correctresolution, and reset your refresh rate. During the power-off of the display, there may be some noisy signals on the screen caused by the normal discharge. 8. Product Technical Specifications H27V13 H24V13 Panel Dimension 27" 23.8" Best Operating Resolution Ratio 1920×1080 @ 100Hz Input Voltage DC 12V / 3A Contrast 13001 10001 Active Area 597.89mm × 336.31mm 527.04mm × 296.46mm Pitch size for wall mount Maximum elevation 100mm × 100mm 5000m H27V13 H24V13 Working condition Temperature0¥_40¥ Humidity30%_90% (Non-condensing) Atmosphere86kPa_106kPa Storage condition Temperature-20¥_55¥ Humidity20%_93% (Non-condensing) Atmosphere86kPa_106kPa Packing Dimension and Weight (W×H×D) Display Dimension (W×H×D) (excluding base) Packing Dimension (W×H×D) Net Weight of Display (including base) Packing Weight 616×364.3×42mm 540×319.6×42mm 708×465×145mm 620×475×115mm 4.3Kg 2.8Kg 5.7Kg 4.1Kg The terms HDMI and HDMI High-Definition Multimedia Interface,and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Adminstrator,Inc. in the United States and other countries.Adobe PDF library 16.07 Adobe Illustrator 27.0 (Windows)