Reclaim Energy Commercial CO2 Heat Pump Hot Water System Tank Specifications

This document details the tank specifications for Reclaim Energy's Commercial CO2 Heat Pump Hot Water Systems, featuring stainless steel tanks.

1000L Dimensions

The following describes the dimensions and connection points for the 1000L tank model. The diagram provides top, side, and bottom views.

Overall Dimensions:

  • Total Height: 2320mm
  • Outer Diameter: 900mm
  • Inner Diameter: 800mm

Connection Ports (from top to bottom):

  • BSP 2" hot outlet (top)
  • BSP 2" hot outlet (No sticker) (top)
  • BSP 1 1/4" secondary flow (top)
  • BSP 2" cold inlet (top)
  • G1/2" temp. sensor (mid-section)
  • BSP 1" T/P valve (mid-section)
  • G3/4" Mg Anode (mid-section)
  • BSP 2" hot outlet (mid-section)
  • G1/2" Sensor Pipe (multiple locations)
  • BSP 1 1/4" secondary return (mid-section)
  • BSP 2" Cold Inlet (bottom)
  • BSP 1" drain water (bottom)

The diagram also indicates various internal measurement points and angles (e.g., 15°, 30°).

Product Features

Reclaim Energy systems are built for strength and durability, leveraging advanced technology for efficient and reliable performance.

Duplex Stainless Steel Tanks

Designed for strength and durability, built to last.

Reclaim Energy CO₂ Heat Pump

Efficient. Reliable. Proven performance.

20+ Years of Innovation

Trusted sustainable hot water expertise.

Proudly Australian

Designed by renewable energy leaders.

Product Specifications

Product codeTank CapacityTank SizeWorking PressureConnectionsNet WeightMaximum Water TempDiameter Inner TankDiameter Outer TankTank Outer CasingTank InnerFoam Insulation
RE-DXO-750750L900mm x 1940mm700kPaBSBP2118kg90°C800mm900mm304 Stainless Steel2205 Duplex Stainless Steel50mm Polyurethane
RE-DXO-10001000L900mm x 2320mm700kPaBSBP2130kg90°C800mm900mm304 Stainless Steel2205 Duplex Stainless Steel50mm Polyurethane

About Reclaim Energy

Reclaim Energy is committed to the goal of a sustainable lifestyle and the potential for living off-grid. With over 20 years of experience, the company is passionate about energy-efficient and environmentally-friendly hot water solutions tailored to Australian requirements. Through product innovation and next-generation technology, Reclaim Energy offers some of the most energy-efficient and flexible hot water solutions available in Australia.

Find a Dealer

Reclaim Energy has high-quality resellers across Australia. Contact a specialist to learn more.

YOUR RECLAIM ENERGY DEALER

Contact Information:

Follow Us:

Issue 03 | September 2025

PDF preview unavailable. Download the PDF instead.

Reclaim-Energy-SST-commercial-Tank-Specs-A4-Sept2025-web Adobe PDF Library 17.0 Adobe InDesign 20.5 (Macintosh)

Related Documents

Preview Reclaim Energy Duplex Tank Specifications: 315L CO2 Heat Pump Hot Water System
Detailed specifications for the Reclaim Energy 315L Duplex Stainless Steel CO2 Heat Pump Hot Water System, including dimensions, technical data, features, and contact information. Learn about its efficient, reliable, and Australian-designed performance.
Preview Reclaim Energy CO2 Heat Pump Hot Water System: Quick Start/Install Manual
Comprehensive quick start and installation manual for the Reclaim Energy CO2 Heat Pump Hot Water System, covering model numbers REHP-KY-CO2-160GL through REHP-KY-CO2-315DX and HE-UM60AR. Includes system overview, installation procedures, safety warnings, and maintenance checks.
Preview Reclaim Energy Heat Pump Hot Water System Warranty Terms and Conditions
Detailed warranty terms and conditions for Reclaim Energy's Air-Source CO2 Heat Pump Hot Water Systems, covering product registration, claim procedures, and component coverage.
Preview Reclaim Energy Air-Source CO2 Heat Pump Quick Start/Install Manual V2
Quick start and installation guide for the Reclaim Energy V2 Air-Source CO2 Heat Pump Hot Water System, covering product updates, system description, installation procedures, troubleshooting, and maintenance. Includes model numbers, installation steps, and operational details.
Preview Reclaim Energy V2 Release Quick Start/Install Manual for Air-Source CO2 Heat Pump Hot Water System
This document provides a quick start and installation guide for the Reclaim Energy V2 Air-Source CO2 Heat Pump Hot Water System. It details product updates, system components, installation procedures, operational guidelines, and troubleshooting steps.
Preview Reclaim Energy Heat Pump Controller V1.1 Manual: Installation, Operation, and Maintenance
This manual provides comprehensive guidance for the Reclaim Energy Heat Pump Controller V1.1, covering installation procedures, operational modes, user access, troubleshooting fault codes, and technical specifications for optimal heat pump performance.
Preview Reclaim Energy Air-Source CO2 Heat Pump Quick Start/Install Manual
This manual provides quick start and installation instructions for the Reclaim Energy Air-Source CO2 Heat Pump Hot Water System, covering system description, installation details, operation, and maintenance.
Preview Reclaim Energy Heat Pump Controller v1.1 Manual
Installation, operation, and maintenance manual for the Reclaim Energy Heat Pump Controller v1.1. This guide covers controller features, modes of operation, installation procedures, and troubleshooting.