Product Overview
The CMW101 is a Full HD 1080P camera equipped with a 120° wide-angle lens. It integrates a 2.4 GHz wireless speaker microphone, making it ideal for small to medium-sized conference rooms, personal business use, or home environments.
Components
Part 1: HD Network Camera
- Lens
- Horizontal shaft
- Lens clamp
- Clamp
- Adjustable base (optional)
- USB cable
Diagram Description: Visual representation of the HD network camera components including the lens, horizontal shaft, lens clamp, clamp, optional adjustable base, and USB cable.
Part 2: 2.4GHz Wireless Speaker Phone
- Loudspeaker
- Triangular Indicator [status]
- Mini USB interface
- 3.5mm audio interface
- Bottom right Indicator [mute status]
- Microphone
- Loudspeaker mute button [mute/unmute]
- Volume Down button [▼]
- Bottom left indicator [mute status]
- Microphone mute button [mute/unmute]
- Volume Up button [▲]
- Power button [power]
LED Indicator Status:
- Blue triangular Indicator: Indicates normal working status.
- Blue bottom right indicator: Shows the loudspeaker is muted.
- Blue bottom left indicator: Shows the microphone is muted.
- Blinking blue bottom left indicator: Signals volume adjustment in progress.
- Blinking orange bottom left indicator: Indicates low power.
Diagram Description: Visual representation of the 2.4GHz wireless speaker phone, detailing its loudspeaker, various indicators (triangular, bottom right, bottom left), interfaces (Mini USB, 3.5mm audio), microphone, mute buttons, volume controls, and power button.
Application
The CMW101 is ready for use after connecting the camera to your PC via USB and powering on the speaker microphone. To turn off the device, press and hold the power button on the speakerphone.
Diagram Description: Illustrates the setup where the camera is connected via USB to a laptop, and the speakerphone is wirelessly connected to the camera, enabling video conferencing.
Operation
Initial Connection and Driver Installation
When connecting the USB cable to your computer for the first time, a system notification will appear in the lower right corner of the screen indicating driver installation.
Diagram Description: A visual representation of a typical operating system notification for device driver installation, showing a status update.
Driver Installation Success
Upon successful installation of the device driver software, your computer will display a prompt confirming that the device is ready for use.
Diagram Description: A visual representation of a successful driver installation confirmation message from the operating system.
Verifying Device Installation
To confirm that the device has been installed correctly, open your computer's Device Manager. Navigate to "Imaging devices" and look for entries such as "USB Camera" and "WSD Scan Device." Successful detection allows you to use the device with instant messaging and video conferencing applications.
Diagram Description: A representation of the Windows Device Manager interface, showing the "Imaging devices" category expanded to list the connected camera devices.
Troubleshooting Video Quality
If you encounter issues with abnormal video color or resolution, you can adjust the settings using the "Amcap" software. It is recommended to check and set the white balance to a default value of 4600 and the video output size to 1920x1080.
Diagram Description: Visuals depicting the "Amcap" software's properties windows. One shows the "Video Proc Amp" tab with adjustable parameters like Brightness, Contrast, White Balance (set to 4600), and Power Line Frequency. Another shows the "Stream Format" tab with settings for Output Size (1920x1080) and Frame Rate.
Alternatively, you can try restoring the camera's default effects within your instant messaging software. If the problem persists after these adjustments, please contact Alfatron's after-sales service for technical support.
