ASUS RT-BE88U

Hardware Overview

Ports

• 10G WAN/LAN Port
• 10G SFP+ Port
• 2.5G WAN/LAN1 Port
• 2.5G Network Ports (2-4)
• 1G Network Ports (5-8)
• USB 3.2 Gen 1 Port (USB 3.0)
• Power Port
• Reset Button
• WPS Button
• Power Switch

LED Indicators

• Power LED
• 2.4GHz Band LED
• 5GHz Band LED
• USB 3.2 Gen 1 LED
• 10G SFP+ (WAN) Internet LED
• LAN Network LED
• WAN (Internet) LED
• 10G SFP+ LED

Specifications

• AC Adapter: DC Output: 19.5V (2.31A) / 12V (5A)
• Operating Temperature: 0-40°C
• Storage Temperature: 0-70°C
• Operating Humidity: 50-90%
• Storage Humidity: 20-90%

Router Setup Steps

Step 1: Prepare Your Modem

1. Disconnect Power

   Unplug the power cable from your modem (DSL or other). If your modem has a backup battery, remove it. [unplug icon]

2. Connect Modem to Router

   Connect your modem to the router's WAN port using the provided network cable.

3. Power On Modem

   Plug the modem into a power outlet and turn it on.

4. Verify Modem Connection

   Check the modem's indicator lights to ensure the connection is established.

[Note: If using DSL for internet access, you will need the username and password provided by your ISP to configure your router.]

Step 2: Install Your Router

1. Connect Power Adapter

   Connect the power adapter to the router's DCIN port and press the power switch. [power button]

2. Power LED Indicator

   The power LED will light up when the hardware is ready.

Step 3: Connect to the Network

Via the ASUS Router App

1. Download the App

   On iOS or Android, open your app store, search for "ASUS Router", and download the application. [App Store icon], [Google Play icon]

2. Connect to Default WiFi

   On iOS or Android, go to Settings > WiFi, and connect to the network named with the default SSID displayed on the label at the back of the router. You can also scan the QR code on the label to connect to the default SSID. [WiFi icon]

3. Complete Setup via App

   Launch the ASUS Router app and follow the on-screen instructions to finish the configuration.

Or via a Web Browser

1. Connect Your Device

   [Wired] Connect your computer to a LAN port on the router using an additional network cable. [Wired connection icon]

   [WiFi] Connect to the network named with the default SSID displayed on the router's back label ("ASUS_XX"). [WiFi icon]

2. Access Setup Assistant

   [Wired/WiFi] Open a web browser. You will be automatically redirected to the ASUS setup assistant. If not, navigate to http://www.asusrouter.com. Follow the instructions to complete the setup.

Enable 10GE LAN Port

Configure 2.5GE WAN Connection

With Default Settings

1. Connect to 2.5GE WAN Port

   Connect your modem to the 2.5GE WAN port using a network cable.

2. Access ASUS Setup Assistant

   [ASUS Setup Assistant] Select "Manual Setting".

3. Configure 2.5G WAN

   [ASUS Setup Assistant] Select "2.5G WAN" and follow the instructions to configure the SSID and connection information.

Getting Started

After completing the setup steps, the router will restart and connect to the internet via the 2.5GE port.

FAQ

Q1: Where can I find more information about the WiFi router?

Technical Support Site: https://www.asus.com/support

Video Tutorials: https://qr.asus.com/wl_videotutorials

Compliance and Safety Information

Recycling and Takeback Services

ASUS is committed to environmental protection through its recycling and takeback programs. For detailed recycling information in different regions, please visit http://csr.asus.com/english/Takeback.htm.

REACH Compliance

In compliance with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, chemical substances in ASUS products are published at http://csr.asus.com/english/REACH.htm.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE: Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow operation instructions as documented in this manual.

WARNING! This equipment must be installed and operated in accordance with provided instructions, and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

This device is restricted for indoor use.

Innovation, Science and Economic Development Canada (ISED) Compliance

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 31cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure can also be found at the following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

For indoor use only.

Antenna Gain Information

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

Safety Notices

Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).

Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT place or drop objects on top and do not shove any foreign objects into the product.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

DO NOT cover the vents on the product to prevent the system from getting overheated.

DO NOT use damaged power cords, accessories, or other peripherals.

If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

DO NOT mount this equipment higher than 2 meters.

The power supply cord(s) must be plugged into socket-outlet(s) that is/are provided with a suitable earth ground.