Kodak PIXPRO ORBIT360 4K Quick Start Guide

1. Camera Views

The Kodak PIXPRO ORBIT360 4K camera features the following components:

• 1 Speaker
• 2 Wi-Fi® Indicator
• 3 Wi-Fi® Button / Direction Button (down) / Remote Control Pairing (press and hold)
• 4 Lens B (235 Degrees)
• 5 Lens Status Indicator B
• 6 Power Button
• 7 Status Indicator
• 8 LCD
• 9 Microphone
• 10 Video Record Button / Shooting Button / OK Button
• 11 Lens A (155 Degrees)
• 12 Lens Status Indicator A
• 13 Menu Button / Direction Button (up) / Mode Switching (press and hold)
• 14 Battery Door Cover
• 15 Battery Door Cover (open/close)
• 16 Battery Door Cover Lock
• 17 Positioning Mount Receptor
• 18 1/4" Screw Socket

2. Insert the Battery and Memory Card

Follow these steps to insert the battery and memory card:

1. Set the battery door lock to the left and slide the battery door open switch downward.
2. Insert the Li-ion battery, aligning the + and - symbols with the connectors in the battery compartment.
3. Insert a microSD / microSDHC / microSDXC memory card (Class 10 or higher, 8GB to 256GB capacity) into the card slot, pushing the bottom end fully into the slot.
4. Close the battery door until it clicks, then slide the battery door lock to the right.

3. Setting the Date / Time

Upon first turning on the camera, you will be prompted to set the date and time:

1. The display will show the date and time setting interface: "Year/Month/Day/Hour: Minute : Second".
2. The field to be edited will be highlighted. Use the (up) or (down) buttons to adjust the value. Press the button to confirm the entry.
3. After setting the "Minute : Second" value, press the button to exit and enter the main interface.

4. Setting Camera Modes

To change camera modes:

1. From the Main Camera interface, press and hold the (up) button to access the Mode selection menu.
2. Use the (up) or (down) buttons to navigate through the modes. Press the button to select and enter the desired mode.

Available modes include: Movie Mode, Photo Mode, Time-Lapse Photo Mode, Loop Recording Mode, Time-Lapse Video Mode, High-Speed Movie Mode, Burst Mode.

5. Setting Menu Modes

To access and adjust settings:

1. From the Main Camera interface, press the (up) button to enter the menu selection for the current mode.
2. Use the (up) or (down) buttons to select the desired item. Press the button to enter and confirm the option.
3. Press the button to return to the main menu interface.

Refer to diagram 5 in the full manual for illustrations of the movie and general setting interfaces.

6. Record 360° Videos and Photographs

• To record video: Press the button to start recording and press the button again to stop.
• To capture photos: In photo shooting mode, press the button to take a picture.

7. Remote Control Options (ANDROID and iOS Systems)

Connect your smart device to the camera for remote control:

1. Download the PIXPRO 360 VR Remote Viewer APP:

• For iOS devices: Search for and download the "PIXPRO 360 VR Remote Viewer" APP from the App Store.
• For ANDROID devices: Search for and download the "PIXPRO 360 VR Remote Viewer" APP from Google Play.

2. Wi-Fi® Connection:

• Check the SSID (PIXPRO-ORBIT360_XXXX) on the camera's battery compartment label.
• On the camera, press the (down) button to enter Wi-Fi® mode. The randomized Wi-Fi® password will be displayed on the “Waiting Connect” screen.
• On your smart device, enable Wi-Fi® and search for nearby hotspots. Select the SSID (PIXPRO-ORBIT360_XXXX) and enter the displayed password.
• Once connected, open the APP.

Note: The Wi-Fi® password is unique and randomized for security compliance.

3. NFC Connection (ANDROID Systems only):

• Enable NFC mode on your smart device.
• Lightly touch your smart device to the NFC printed letters on the camera. A prompt tone or vibration indicates a successful connection.
• The APP will open automatically.

Note: NFC functionality requires the smart device's screen to be unlocked.

8. Connect to a PC via Wi-Fi® (Mac and Windows Systems only)

Control your camera from your computer:

1. Download the "PIXPRO 360 VR Suite" installation packages for MAC or Windows from the official kodakpixpro.com website and install it.
2. Camera Setup: Check the SSID (PIXPRO-ORBIT360_XXXX) on the camera's battery compartment label. In the camera's main interface, press the (down) button to switch to Wi-Fi® mode. The Wi-Fi® password will be displayed on the “Waiting Connect” screen.
3. PC Connection: Enable Wi-Fi® on your computer. Search for nearby Wi-Fi® hotspots, select the camera's SSID (PIXPRO-ORBIT360_XXXX), and input the password. Double-click the APP icon on your desktop to launch it.

9. Remote Control Pairing

Pair a remote control with your camera:

1. From the Main Camera interface, press and hold the (down) button for 2 seconds to enter pairing mode.
2. Press and hold the and buttons on the remote control simultaneously until pairing is successful.

10. More Helpful Information

• Download user manuals and software from the official KODAK PIXPRO website: https://us.kodakpixpro.com/orbit360-4k/user-manual/ and https://kodakpixpro.com/Europe/support/multi-lang-downloads.php.
• For more information and accessories, visit: kodakpixpro.com.
• Register your camera for the latest firmware, software, and important notices.
• Refer to the official kodakpixpro.com website for additional support documentation, detailed specifications, and helpful information.