Hard Head Key Cabinet - User Manual

Installation

Mount the key cabinet onto a stable wall using all four holes on the back panel. Ensure screws are tightened sufficiently without distorting the back plate. Use the flexible gasket on the back for all installations. Wall plugs are recommended for masonry and brick walls.

For maximum protection, the key cabinet should be mounted in a discreet yet accessible location with adequate lighting to operate the combination dial. The key cabinet can be placed indoors or outdoors.

Operation

The factory preset code for the key cabinet is "0-0-0-0".

Opening the cabinet: Rotate the four dials to the correct combination, then pull the cabinet door downwards towards you.

Locking the cabinet: Hang the key or other desired item securely inside the cabinet, close the lid, and set the lock to a random combination to secure it.

Resetting the Combination Lock

Please read all instructions carefully before resetting the combination. Memorize and record your new combination in the space provided. Keep these instructions and your code in a secure place.

1. Open the key cabinet using your current code (factory preset is "0-0-0-0").
2. Remove the rubber cover from the reset lever inside the cabinet. Slide the reset pin to the left and down as indicated by the arrow (the lid should be open).
3. Rotate the four dials on the front to set your new combination. Ensure the numbers are centered and have clicked into position.
4. Slide the reset pin back to its initial position, upwards and to the right, opposite to the direction of the arrow.
5. Close the lid. To lock the cabinet, turn the four dials to a random combination. Verify the cabinet's operation by opening it with the newly set combination.

Maintenance

It is recommended to rotate the dials of the combination lock weekly to ensure they remain in good working order.