AUSDOM Magkey12.9 Tablet Keyboard Cases
Thank you for purchasing AUSDOM Tablet Keyboard Cases
1. Product Overview
The AUSDOM Magkey12.9 is a tablet keyboard case with a built-in trackpad. It features a Caps Lock indicator and a Bluetooth pairing indicator. The keyboard has a charging interface and a power indicator, low voltage indicator, and charging indicator.
Note: Please adjust the keyboard within the allowable angle range (60° and 70°) as shown in the figure. Otherwise, it may be damaged.
2. Packing List
- 1* Keyboard Case
- 1* USB-C Charging Cable
- 1* User Manual
3. Bluetooth Connection
1. Open the keyboard case. The power indicator turns red for 3 seconds and then goes out, indicating the keyboard is turned on.
2. The keyboard automatically enters 'Bluetooth pairing mode' upon the first successful power-on. To manually enter pairing mode, press and hold fn + C for 3 seconds. The Bluetooth pairing indicator will flash rapidly.
3. On your device, go to Settings and turn "Bluetooth" on.
4. Search for "AUSDOM Magkey12.9" and click "Pair".
5. The keyboard is connected, and pairing is successful.
4. Sleep Mode
1. If the keyboard is turned on for 3 minutes without pairing, it will enter sleep mode and stop pairing until any key is pressed or fn + C is held for 3 seconds.
2. If the keyboard has already been paired with a device, it will automatically connect to that device on subsequent power-ons without needing to re-pair.
3. When the keyboard is not used for more than 30 minutes, it automatically goes to sleep mode and disconnects from the device.
4. To wake the keyboard, press any key. It will automatically connect to the device within 3 seconds.
5. Charging
When the power is low, the power indicator light will flash red. Please recharge the keyboard to ensure normal use. A low power level may cause delayed, stuck, or unstable transmission.
6. Function Key Description
| Key Combination | Function |
|---|---|
| fn + [ | Home |
| fn + ] | Decrease brightness |
| fn + ↑ | Increase brightness |
| fn + ← | Previous track |
| fn + → | Next track |
| fn + ↓ | Mute |
| fn + Caps Lock | Lock screen |
| fn + Spacebar | Enable virtual keyboard |
| fn + Q | Search |
| fn + II | Play/Pause |
| fn + ( | Volume down |
| fn + ) | Volume up |
| fn + Fn | Touchpad switch |
| fn + Shift + Delete | Restore factory settings |
| fn + [Symbol for Sun] | Single press to adjust backlight brightness |
7. Indicator
| Indicator | Light Color | Operating Status |
|---|---|---|
| Power indicator | Red | When powered on, the red light stays on for 3 seconds and then turns off. |
| Low voltage indicator | Red | When the battery power is low, the indicator light flashes every 3 seconds. |
| Charging indicator | Red/Green | The red light is on when charging, and the green light is on after fully charged. |
| Bluetooth pairing indicator | White | During Bluetooth pairing mode, the indicator light flashes once every second. If pairing is not successful after 180 seconds, the keyboard will go to sleep mode. The indicator light will be off if pairing is successful. |
| Caps Lock indicator | White | Caps status light will stay on. |
8. Schematic Diagram of Touchpad Functions
The touchpad supports various gestures for controlling your tablet:
| Finger movement | Finger Gesture Instructions | Function |
|---|---|---|
[Single finger tap] |
Press with one finger until you feel a click. | Click |
[Single finger press and hold] |
Press and hold with one finger. | Click and hold |
[Single finger drag] |
Click and hold an item, then slide your finger across the trackpad to move it. | Drag |
[Two finger tap] |
Click the trackpad. Or, if using an external keyboard, press any key. | Wake iPad |
[Single finger swipe down from bottom] |
Use one finger to swipe the pointer past the bottom of the screen. | Open the Dock |
[Single finger swipe down twice] |
Use one finger to swipe the pointer past the bottom of the screen. After the Dock appears, swipe the pointer past the bottom of the screen again. Alternatively, click the bar at the bottom of the screen (on an iPad with Face ID). | Go Home |
[Single finger swipe to top right corner] |
Use one finger to move the pointer to select the status icons at the top right, then click. Or select the status icons at the top right, then swipe up with one finger. | Open Control Center |
[Single finger swipe to top left corner] |
Use one finger to move the pointer to select the status icons at the top left, then click. Or use one finger to move the pointer past the top of the screen near the middle. | Open Notification Center |
[Two fingers swipe up or down] |
Swipe two fingers up or down. | Scroll up or down |
[Two fingers swipe left or right] |
Swipe two fingers left or right. | Scroll left or right |
[Two fingers pinch in or out] |
Place two fingers near each other. Pinch open to zoom in, or pinch closed to zoom out. | Zoom |
[Three fingers swipe up] |
Swipe up with three fingers. | Go Home |
[Three fingers swipe up with pause] |
Swipe up with three fingers, pausing before you lift your fingers. Or pinch four fingers together, pausing before you lift your fingers. | Open the App Switcher |
[Three fingers swipe left or right] |
Swipe left or right with three fingers. | Switch between open apps |
[Two fingers swipe right] |
When the Home Screen or the Lock Screen is visible, use two fingers to swipe right. | Open Today View |
[Two fingers swipe down] |
Swipe down with two fingers. | Open search from the Home Screen |
[Two fingers click] |
Click with two fingers to show the quick actions menu for items like icons on the Home Screen, messages in a mailbox, and the Camera button in Control Center. Or if using an external keyboard, press the Control key while clicking the trackpad. | Secondary click |
9. Specifications
| Specification | Value |
|---|---|
| Bluetooth version | V5.0 |
| Bluetooth Pairing Name | AUSDOM Magkey12.9 |
| Wireless Range | 8m |
| Battery Capacity | 750mAh |
| Continuous working time with backlight on | >8.5 hours |
| Continuous working time with backlight off | >750 hours |
| Standby Time | >365 days |
| Charging Time | <3 hours |
| Keys Life | 3 Million Strokes |
Note: Features and technical specifications are subject to change without notice. AUSDOM apologizes for any inconvenience.
10. Warranty
The Keyboard is covered by a 1-year manufacturer warranty. For more information, visit www.ausdom.com.
Safety and Recycling Information
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. Users have the choice to give their product to a competent recycling organization or to the retailer when buying a new electrical or electronic equipment.
The product complies with CE, FCC, and RoHS standards. It is a Green Product.
DC voltage is indicated.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
AUSDOM: Make Imaging to Real
