USER MANUAL

12 Month Warranty

Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with the accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law. Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect. Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Important Safety Warnings

WARNING:

• Do not dispose of unit in fire or water.
• Never attempt to disassemble and reassemble.
• Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice.
• Keep your device and all accessories out of reach of children and animals. Small parts may cause choking or serious injury if swallowed.
• Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 40°C). Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
• Do not allow your device to get wet; liquids can cause serious damage.
• Do not handle your device with wet hands.
• This product shall not be connected to power supply source exceeding PS2 (5V d.c. 2A, 9V d.c. 2A, 12V d.c. 2A).
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Do not expose the device to direct sunlight, heat, or flame.
• Device may become warm while charging.
• Make sure the product has plenty of ventilation.
• Do not press the buttons too hard as it could damage the product.
• Do not use chemicals on this product.
• Never try to repair this product yourself; take it to a certified technician. Trying to remove panels or repairing the unit yourself could lead to electric shock.
• When the unit is not in use, make sure it is correctly turned off and stored in a cool dry place.
• Do not insert foreign objects into the product.
• Avoid dropping the product, as harsh impacts could damage the product.
• Cut off the power before cleaning the clock with a soft cloth.
• Damage, shock, and/or injury can occur if these warnings are not heeded.

Product Overview

What's Included:

• Alarm clock x 1
• Instruction Manual x 1
• USB-C cable x 1

Specifications

Note: The marking located on the bottom of the apparatus.

Function Overview & Operation

The alarm clock features a digital display and several control buttons. The device is powered via USB-C and includes wireless charging capabilities.

Device Components:

• Power Button: Press and hold for more than 2 seconds to turn the device on/off.
• Mode Button: Used to cycle through settings (Time, Alarm, Date) and switch between 12/24 hour format.
• Up Button: Increases values during setting modes.
• Down Button: Decreases values during setting modes.
• Light Button: Turns on the ambient light and adjusts its brightness (3 levels: 100%-75%-25%).
• USB-C Charging Port: Located on the back for power input.
• Wireless Charger Center: Located on the top surface for charging compatible devices.
• Power Indicator: A red light indicates the device is powered on.

Power Supply and Memory

Please use the provided USB-C cable. Connect the USB end to a power adapter and the USB-C port to the product. The red power indicator light will illuminate.

The product enters normal working state. The time defaults to 00:00. The temperature detection starts and the temperature value is displayed in Celsius (°C).

Insert 2x AAA batteries (not included) for clock memory backup. These batteries do not power the unit itself.

Wireless Charging

Place your smartphone with wireless charging function on the top center of the unit. The wireless charging indicator on the display will light up green.

Indicator Light Display Mode:

• When using wireless charging: the green light is always on.
• Foreign object detection: the green light flashes.

This unit supports 5W, 7.5W, and 10W wireless charging.

How To Set This Product

Power On/Off Function: Press and hold the Power Button for more than 2 seconds to turn on/off.

12/24h Switch: Press the Up Button or Down Button to switch between 12H and 24H format. In 12H mode, a 'PM' indicator will display in the afternoon.

Time Setting:

1. Press and hold the Mode Button to enter the setting mode. The hour digits will flash.
2. Press the Up Button or Down Button to set the hour. Press and hold either button to skip through values quickly.
3. Press the Mode Button again to enter the minute setting. The minute digits will flash.
4. Press the Up Button or Down Button to set the minutes. Press and hold either button to skip through values quickly.

After time setting, continue to press the Mode Button to enter Alarm clock setting.

Alarm Clock Setting:

1. After entering Alarm clock setting, the hour digits will flash.
2. Press the Up Button or Down Button to set the alarm hour. Press and hold either button to skip through values quickly.
3. Press the Mode Button again to enter the alarm minute setting. The minute digits will flash.
4. Press the Up Button or Down Button to set the alarm minutes. Press and hold either button to skip through values quickly.

After alarm clock setting, continue to press the Mode Button to enter date setting.

Date Setting:

1. After entering date setting, the Year digits will flash.
2. Press the Up Button or Down Button to set the Year. Press and hold either button to skip through values quickly.
3. Press the Mode Button again to enter the Month setting. The Month digits will flash.
4. Press the Up Button or Down Button to set the Month. Press and hold either button to skip through values quickly.
5. Press the Mode Button again to enter the Day setting. The Day digits will flash.
6. Press the Up Button or Down Button to set the Day. Press and hold either button to skip through values quickly.

Note: The device will automatically exit and save settings if there is no operation within 10 seconds.

Alarm Clock Function

• Press and hold the Power Button for more than 2 seconds to turn the alarm clock function on and off.
• When the alarm rings (beep sound), it will sound for 25 seconds, stop for 10 seconds, then ring for another 25 seconds. It will automatically turn off after two rounds.
• When the alarm clock rings, the alarm indicator light also flashes. Press any button to turn off the ringing.

Light Function

Press the Light Button to turn on the ambient light and adjust its brightness. There are 3 levels of brightness control: 100%, 75%, and 25%. The default brightness is 100%.