Trust Axxy Bluetooth Wireless Speaker

Getting Started

This guide provides instructions for setting up and using your Trust Axxy Bluetooth Wireless Speaker.

Charging the Speaker

1. Connect the charging cable to the speaker's charging port.
2. Connect the other end of the cable to a power adapter (not included).
3. A red indicator light will illuminate while charging. The light will turn off or change color (depending on the model) when fully charged. Charging typically takes approximately 3 hours.

Indicator Lights:

• Red light: Charging
• Light off/Green light: Fully Charged

Powering On and Pairing

1. Press and hold the power button ▶️ for approximately 1 second to turn the speaker on.
2. The speaker will enter pairing mode, indicated by a flashing blue light or a specific sound.
3. On your smartphone or other Bluetooth-enabled device, go to Bluetooth settings.
4. Select "Trust Axxy" from the list of available devices to pair.
5. Once paired successfully, the indicator light will turn solid blue, and you may hear a confirmation sound.

Music Playback and Controls

You can control music playback using the buttons on the speaker or your connected device.

Speaker Controls:

• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.
• Play/Pause: Press the play/pause button ▶️ ||.
• Mode/M Button: Used for switching modes or functions (refer to specific model details if applicable).

Connecting via Aux Cable

If your device does not support Bluetooth, you can connect it using a 3.5mm audio cable (not included).

1. Connect one end of the audio cable to your device's headphone jack.
2. Connect the other end to the AUX input port on the speaker.
3. The speaker will automatically switch to AUX mode.

Making and Receiving Calls

The Trust Axxy speaker can be used for hands-free calls when connected to your smartphone via Bluetooth.

• Answer/End Call: Press the play/pause button ▶️ || once.
• Reject Call: Press and hold the play/pause button ▶️ ||.

Note: The speaker may display a phone number on your connected device's screen when a call is incoming.

Additional Features

MicroSD Card Support

You can play music directly from a MicroSD card.

1. Insert a MicroSD card into the MicroSD card slot on the speaker.
2. The speaker will automatically play music from the card.

Troubleshooting and Support

For frequently asked questions and support, please visit:

www.trust.com/23548/FAQ

For customer service, you can call: 064-64-891.