Breezeline Stream TV Remote Essentials

Your Breezeline Stream TV Remote

The Breezeline Stream TV remote provides comprehensive control over your viewing experience. Functions like Fast Forward, Rewind, and Pause/Play appear on your TV screen. Use the middle buttons (OK/Select, LEFT, RIGHT) on your remote to operate these on-screen functions while watching video.

Below is a description of the remote's buttons and their functions:

• A POWER: Turns the television on/off. [power-button]
• B GUIDE: Takes you to the program guide. [guide-icon]
• C VOL & MUTE: Control the TV audio. [volume-icon] [mute-icon]
• D Navigation Buttons (Up, Down, Left, Right, OK/Select):
  • While navigating TiVo menus: Use UP, DOWN, LEFT, or RIGHT to move around the screen. The center button (OK/Select) chooses menu items. [select-button]
  • While watching video: DOWN displays the Info banner. [info-icon] UP opens the mini guide. OK/SELECT brings up Trick Play controls. [trick-play-icon] With Trick Play controls visible: DOWN opens the Continue Watching and Favorite Channels panels.
• E BACK: Starts full-screen video on the Home screen, and goes back to the previous screen on other menus. [back-arrow]
• F Google Assistant: Press and release to talk to Google. [google-assistant-icon]
• G VOD: Goes directly to the On Demand library. [vod-icon]
• H NETFLIX: Launches Netflix. [netflix-icon]
• I INPUT: Changes your video source (e.g., TiVo device, gaming console). [input-icon]
• J CH UP/DOWN: Changes the channel or moves you quickly through lists and the guide. [channel-up-icon] [channel-down-icon]
• K TiVo button: Takes you to the Home Screen. [tivo-icon]
• L INFO (i): Brings up the full Info banner while watching a show, with options like Record, Bookmark, Change Audio Track, etc. [info-icon]
• M EXIT: Switches to full-screen video while using TiVo menus, or jumps back to the LAST CHANNEL viewed while watching live TV. Also exits a Start Over/Catch Up show. [exit-icon]
• N Grid button: Jumps to the Apps & Games screen. [apps-icon]
• O NUMBER BUTTONS: Make it easy to enter numbers, such as channel numbers or Parental Controls PINs. [number-keys]

Installing Stream TV for the First Time (new box, new remote)

1. You should see a specific screen during First Time Installation (FTI).
2. Press the TIVO button [tivo-icon] to start the pairing process.
3. The indicator light on the remote will blink amber/yellow slowly while it searches for the Stream TV box. It will then blink amber/yellow quickly 5 times when pairing is successful.

During the pairing process, the TV screen will display a prompt such as "Pair Your TiVo Remote". It will indicate that the activity LED will flash amber while pairing. If the remote has been used previously, a re-pairing process might be initiated by pressing and holding the UP [up-arrow] and LEFT [left-arrow] buttons simultaneously until the activity LED turns red.

Re-pairing Your Remote to your Stream TV box (existing box, existing remote)

1. If your remote becomes unpaired for any reason, press the TIVO [tivo-icon] and BACK [back-arrow] buttons simultaneously until the indicator light turns RED.
2. The indicator light will blink amber/yellow slowly while it searches for the Stream TV box. It will then blink amber/yellow quickly 5 times when pairing is successful.
3. If a list of remotes appears on the screen, use the directional pad to highlight your remote and press OK/SELECT [select-button] to choose the remote and pair it.

The TV screen will show messages like "Searching for accessories..." during this process.

Reset & Re-Pair Your Remote

1. Press and hold the TIVO [tivo-icon] and POWER [power-button] buttons on the remote simultaneously for approximately 3 seconds, until the activity light turns solid red. (Note: If the buttons are not pressed at the exact same time, the activity light may flash yellow or yellow/red instead. Try again after the light stops flashing.)
2. Press the VOLUME DOWN [volume-down-icon] button three times.
3. Press the TIVO button [tivo-icon].
4. The activity light will flash red three times.
5. Remove the batteries from the remote for at least 10 seconds. The remote is now reset and can be paired with your Stream TV box.
6. Insert the batteries into the remote.
7. Press the TIVO button [tivo-icon] to start the pairing process.
8. The indicator light will blink amber/yellow slowly while it searches for the Stream TV box. It will then blink amber/yellow quickly 5 times when pairing is successful.

Controlling Your TV Power and Volume with Your Stream TV Remote

1. Navigate to Menu > Settings > Remote Settings > Remote Control Programming.
2. Choose "Set up TV" and select your TV manufacturer from the provided list. The channel up/down [channel-up-icon] [channel-down-icon] buttons can be used to scroll faster.
3. Follow the on-screen instructions to begin testing code #1.
4. If code #1 works, the setup is complete. Otherwise, try additional codes until you find one that works for your TV.

Note: If you notice any unusual behavior after programming the remote, you can always return to this screen, select "No, try next code," and try a different code.

Thanks for Choosing Breezeline.