AEG IKB64301XB User Manual

Contents

• 1. Safety Information
• 2. Safety Instructions
• 3. Product Description
• 4. Daily Use
• 5. Hints and Tips
• 6. Care and Cleaning
• 7. Troubleshooting
• 8. Installation
• 9. Technical Data
• 10. Energy Efficiency
• 11. Environmental Concerns

For Perfect Results

Thank you for choosing this AEG product. It is designed to provide impeccable performance for many years, featuring innovative technologies to simplify your life. Please spend a few minutes reading this manual to get the very best from your appliance.

Visit our website for:

• ℹ️ Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice
• ? Register your product for better service: www.registeraeg.com
• ? Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

Customer Care and Service

Always use original spare parts. When contacting an Authorised Service Centre, ensure you have the following data available: Model, PNC, Serial Number. This information can be found on the rating plate.

⚠️ Warning / Caution - Safety information

ℹ️ General information and tips

? Environmental information

Subject to change without notice.

1. Safety Information

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away unless continuously supervised.
• Children of less than 3 years of age should be kept away unless continuously supervised.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of it appropriately.
• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, it should be activated.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

• ⚠️ WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• Do not operate the appliance by means of an external timer or separate remote-control system.
• ⚠️ WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
• ❗ CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
• ⚠️ WARNING: Danger of fire: Do not store items on the cooking surfaces.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• Do not use a steam cleaner to clean the appliance.
• After use, switch off the hob element by its control and do not rely on the pan detector.
• If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.
• ⚠️ WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

2. Safety Instructions

2.1 Installation

⚠️ WARNING! Only a qualified person must install this appliance.

⚠️ WARNING! Risk of injury or damage to the appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Keep the minimum distance from other appliances and units.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
• Protect the bottom of the appliance from steam and moisture.
• Do not install the appliance adjacent to a door or under a window. This prevents hot cookware falling from the appliance when the door or the window is opened.
• Each appliance has cooling fans on the bottom.
• If the appliance is installed above a drawer: Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.

2.2 Electrical Connection

⚠️ WARNING! Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is disconnected from the power supply.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact an Authorised Service Centre or an electrician to change a damaged mains cable.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use

⚠️ WARNING! Risk of injury, burns and electric shock.

• Remove all the packaging, labelling and protective film (if applicable) before first use.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Set the cooking zone to "off" after each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply to prevent an electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
• When you place food into hot oil, it may splash.
• ⚠️ WARNING! Risk of fire and explosion
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• ⚠️ WARNING! Risk of damage to the appliance.
• Do not keep hot cookware on the control panel.
• Do not put a hot pan cover on the glass surface of the hob.
• Do not let cookware to boil dry.
• Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

6. Care and Cleaning

⚠️ WARNING! Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner suitable for the surface of the hob.
• Use a special scraper for the glass.

6.2 Cleaning the hob

• Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
• Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface.
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth.
• Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.

7. Troubleshooting

⚠️ WARNING! Refer to Safety chapters.

7.1 What to do if...

7.2 If you cannot find a solution...

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also the three-digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure you operated the hob correctly. If not, the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet.

8. Installation

⚠️ WARNING! Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.

Serial number: ...........................

8.2 Built-in hobs

Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.

8.3 Connection cable

• For a single phase or two phase connection, use the cable type: H05BB-F or H03V2V2-F which withstands a temperature of 70°C or higher.
• To replace the damaged mains cable, use the cable: H05BB-F or H03V2V2-F which withstands a temperature of 70°C or higher.

8.4 Assembly

Diagram showing installation requirements:

• Minimum clearance above the hob: 500 mm.
• Minimum clearance to sides and front: 50 mm.
• Minimum clearance for countertop edge: 12 mm.
• Cutout dimensions: 490+1 mm x 560+1 mm.
• Minimum installation depth: 55 mm.
• Minimum clearance from back panel: 60 mm.
• Minimum clearance from wooden cabinet edge: 28 mm. ⚠️

ℹ️ If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.

3. Product Description

3.1 Cooking surface layout

Diagram showing a rectangular hob with four circular cooking zones. The top two zones are 180 mm in diameter. The bottom left zone is 210 mm, and the bottom right is 145 mm. The control panel is located to the right of the cooking zones.

1. Induction cooking zone

2. Control panel

3.2 Control panel layout

Diagram of the control panel with numbered sensor fields:

• 1: ON/OFF ⚪
• 2: Hob²Hood ♨️
• 3: Lock / Child Safety Device ?
• 4: Pause ⏸️
• 5: Heat setting display
• 6: Timer indicators of cooking zones
• 7: Timer display
• 8: Zone selector ⚫
• 9: Time adjustment +/-
• 10: Heat setting adjustment +/-
• 11: PowerBoost ⚡

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

3.3 Heat setting displays

3.4 OptiHeat Control (3 step Residual heat indicator)

⚠️ WARNING! E/ There is a risk of burns from residual heat. The indicator shows the level of the residual heat.

The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.

4. Daily Use

⚠️ WARNING! Refer to Safety chapters.

4.1 Activating and deactivating

Touch ⚪ for 1 second to activate or deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
• you use incorrect cookware. The symbol F comes on and the cooking zone deactivates automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After some time - comes on and the hob deactivates.

The relation between the heat setting and the time after which the hob deactivates:

4.3 The heat setting

Touch + to increase the heat setting. Touch - to decrease the heat setting. Touch V and ^ at the same time to deactivate the cooking zone.

4.4 Automatic Heat Up

If you activate this function, you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting.

ℹ️ To activate the function, the cooking zone must be cold.

To activate the function for a cooking zone:

1. Touch ⚫ (comes on).
2. Immediately touch E (comes on).
3. Immediately touch + until the correct heat setting comes on. After 3 seconds ^ comes on.

To deactivate the function: touch V.

4.5 PowerBoost

This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting.

ℹ️ Refer to "Technical data" chapter.

To activate the function for a cooking zone: touch P (comes on).

To deactivate the function: touch P or V.

4.6 PowerBoost with a double ring cooking zone

The function is activated for the inner ring when the hob senses the cookware with a smaller diameter than the inner ring. The function is activated for the outer ring when the hob senses the cookware with a bigger diameter than the inner ring.

4.7 Timer

Count Down Timer

You can use this function to set how long the cooking zone should operate for a single cooking session. First set the heat setting for the cooking zone then set the function.

To set the cooking zone: touch ⚫ again and again until the indicator of a necessary cooking zone comes on.

To activate the function or change the time: touch + or - of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly, the time counts down.

To see the remaining time: set the cooking zone with ⚫. The indicator of the cooking zone starts to flash quickly. The display shows the remaining time.

To deactivate the function: set the cooking zone with ⚫ and touch -. The remaining time counts back to 00. The indicator of the cooking zone goes out.

ℹ️ When the time comes to an end, the sound operates and "00" flashes. The cooking zone deactivates.

To stop the sound: touch ⚪.

Minute Minder

You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. The heat setting display shows -.

To activate the function: touch ⚪.

Touch + or - of the timer to set the time. When the time comes to an end, the sound operates and "00" flashes.

To stop the sound: touch ⚪.

To deactivate the function: touch ⚪ and then touch -. The remaining time counts back to 00.

ℹ️ The function has no effect on the operation of the cooking zones.

4.8 Pause

This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. The function does not stop the timer functions.

Touch ⏸️ to activate the function. U comes on. The heat setting is lowered to 1.

To deactivate the function, touch ⏸️. The previous heat setting comes on.

4.9 Lock

You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. Set the heat setting first.

To activate the function: touch ?. L comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch ?. The previous heat setting comes on.

ℹ️ When you deactivate the hob, you also deactivate this function.

4.10 Child Safety Device

This function prevents an accidental operation of the hob.

To activate the function: activate the hob with ⚪. Do not set the heat setting. Touch ? for 4 seconds. L comes on.

Deactivate the hob with ⚪.

To deactivate the function: activate the hob with ⚪. Do not set the heat setting.

Touch ? for 4 seconds. L comes on.

Deactivate the hob with ⚪.

To override the function for only one cooking time: activate the hob with ⚪. L comes on. Touch ? for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with ⚪ the function operates again.

4.11 OffSound Control (Deactivation and activation of the sounds)

Originally the sounds are activated.

Deactivate the hob. Touch ⚪ for 3 seconds. The display comes on and goes out. Touch ⚪ for 3 seconds. 6 or comes on. Touch + of the Timer to choose one of the following:

• - the sounds are off
• 6 the sounds are on

To confirm your selection, wait until the hob deactivates automatically.

When the function is set to -, you can hear the sounds only when:

• you touch ⚪
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.

ℹ️ If there is a problem with electrical supply and the hob deactivates, it does not keep previous settings.

4.12 Power management

• Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration.
• Each phase has a maximum electricity loading of 3700 W.
• The function divides the power between cooking zones connected to the same phase.
• The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.
• The function decreases the power to the other cooking zones connected to the same phase.
• The heat setting display of the reduced zones changes between two levels.

Diagram illustrating power management grouping of cooking zones.

4.13 Hob²Hood

It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.

ℹ️ For most of the hoods, the remote system is originally deactivated. Activate it before you use the function. For more information, refer to the hood user manual.

Operating the function automatically

To operate the function automatically, set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.

¹⁾ The hob detects the boiling process and activates fan speed in accordance with automatic mode.

²⁾ The hob detects the frying process and activates fan speed in accordance with automatic mode.

³⁾ This mode activates the fan and the light and does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.
2. Touch ⚪ for 3 seconds. The display comes on and goes off.
3. Touch ? for 3 seconds.
4. Touch + a few times until H comes on.
5. Touch + of the Timer to select an automatic mode.

ℹ️ To operate the hood directly on the hood panel, deactivate the automatic mode of the function.

When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time, the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.

Operating the fan speed manually

You can also operate the function manually. To do that, touch ♨️ when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press +, you raise the fan speed by one. When you reach an intensive level and press + again, you will set fan speed to 0, which deactivates the hood fan. To start the fan again with fan speed 1, touch ♨️.

ℹ️ To activate automatic operation of the function, deactivate the hob and activate it again.

Activating the light

You can set the hob to activate the light automatically whenever you activate the hob. To do so, set the automatic mode to H1 – H6.

ℹ️ The light on the hood deactivates 2 minutes after deactivating the hob.

5. Hints and Tips

⚠️ WARNING! Refer to Safety chapters.

5.1 Cookware

For induction cooking zones, a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware.

Cookware material

• Correct: Cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
• Not correct: Aluminium, copper, brass, glass, ceramic, porcelain.

Cookware is suitable for an induction hob if:

• Water boils very quickly on a zone set to the highest heat setting.
• A magnet pulls on to the bottom of the cookware.

The bottom of the cookware must be as thick and flat as possible. Ensure pan bases are clean and dry before placing on the hob surface.

Cookware dimensions

Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone.

ℹ️ Refer to "Technical data".

5.2 The noises during operation

If you can hear:

• Crack noise: Cookware is made of different materials (sandwich construction).
• Whistle sound: You use the cooking zone with high power level and the cookware is made of different materials (sandwich construction).
• Humming: You use high power level.
• Clicking: Electric switching occurs.
• Hissing, buzzing: The fan operates.

The noises are normal and do not refer to hob malfunction.

5.3 Examples of cooking applications

The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power.

ℹ️ The data in the table is for guidance only.

5.4 Hints and Tips for Hob²Hood

When you operate the hob with the function:

• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between the hob and the hood (for example with a hand or a cookware handle). See the picture. The hood in the picture is only exemplary.

Diagram showing the Hob²Hood signal path, including a hand interrupting it.

ℹ️ Other remotely controlled appliances may block the signal. Do not use any remotely controlled appliances at the time when you use the function on the hob.

Cooker hoods with the Hob²Hood function:

To find the full range of cooker hoods which work with this function, refer to our consumer website. The AEG cooker hoods that work with this function must have the ♨️ symbol.

9. Technical Data

9.1 Rating plate

Model: IKB64301XB

Type: 61 B4A 00 AA

Induction: 7.35 kW

Ser.Nr.: ...........................

PNC: 949 597 399 00

Voltage: 220 - 240 V / 400 V 2N 50 - 60 Hz

Made in Germany

Power: 7.35 kW

Certification: CE

9.2 Cooking zones specification

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.

For optimal cooking results, use cookware no larger than the diameter in the table.

10. Energy Efficiency

10.1 Product information according to EU 66/2014

10.2 Energy saving

You can save energy during everyday cooking if you follow below hints:

• When you heat up water, use only the amount you need.
• If it is possible, always put the lids on the cookware.
• Before you activate the cooking zone, put the cookware on it.
• Put the smaller cookware on the smaller cooking zones.
• Put the cookware directly in the centre of the cooking zone.
• Use the residual heat to keep the food warm or to melt it.

11. Environmental Concerns

Recycle materials with the ♻️ symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the ♻️ symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.