XG89 User Manual

Smart Glasses

This document serves as the user manual for the XG89 Smart Glasses.

Product Diagram

The product diagram illustrates the XG89 smart glasses. It shows the glasses with lenses and arms. Key components are labeled: 1. Control buttons, 2. HD glasses (lenses), 3. Tips light, 4. Air dissipation hole, 5. Sound output hole, and 6. Type-C interface.

Packing List

The packing list shows the items included in the box: the smart glasses (labeled 'Glasses (including built-in battery)'), a Type-C charging cable, and a User Manual.

Product Specifications

• Product model: XG89
• Wireless version: V6.0
• Charging time: About 60 minutes
• Battery capacity: 80mAh
• Transmission distance: ≥ 10 meters
• Lens material: PC
• Charging voltage and current: (Details not specified in text)
• Standby time: 30h
• Bluetooth protocol: A2DP/AVDTP/AVRCP/RFCOMMHFP/HSP/5Pp/HID
• Channel: stereo

Functional Operation Instructions

1. Power on: Press and hold the control keys. When the device starts up, the "TONE sound" is flashing alternately.
2. Shutdown: Press and hold the control key for 5 seconds to turn off the power, prompting the "TONE sound" white light flashes 3 times and turns off.
3. Play/Pause: Click the control key.
4. Switch songs: Double-click the control key for the next song.
5. Volume reduction: Three-click control key for volume down.
6. Answer phone calls: Click the control key.
7. Reject incoming calls: Press and hold the control key for 2 seconds.
8. Hang up the call: Click the control key.
9. Siri voice function: Press and hold the control key for 2 seconds to wake up Siri function.
10. Low battery warning: When the battery power is lower than 3.2V, a low-voltage prompt sound cycles every 30 seconds. When the battery power is lower than 3.0V, the device shuts down. The "TONE" white light flashes once every 5 seconds.

Pairing Method

1. Phone pairing: Turn on the Bluetooth of your phone, scan for new devices, find "XG89" and click to pair. The white and green lights flash alternately.
2. Phone pairing successful: The device indicates connection is successful, and the "TONE" prompt sounds, turning off the lights.
3. Pairing time: In pairing mode, if not paired with a phone, the glasses automatically turn off after a period. The white and green lights flash alternately.
4. Disconnect: The phone actively disconnects from the headphones, prompting "TONE sound", with white and green lights flashing alternately.
5. Automatic reconnection: When the phone's Bluetooth is turned on, the headset will automatically reconnect to the last paired device after being turned on.

Charging Operation

1. Earphone charging: Input DC: 5V power supply for charging. The white light is always on.
2. Earphones fully charged: The headphones turn off after a full charge. The green light turns off after 20 seconds.

Important Information

Pay Attention To

• Before using the product, please read this user manual carefully and keep it properly.
• For first use, please fully charge this product first.
• If the product is not used for a long time (more than 1 month), please charge it.
• If the phone cannot search for Bluetooth earphones, please confirm whether the Bluetooth earphones are in "pairing status". If pairing or connection is not made for a long time, the Bluetooth earphone pairing function will be turned off. Please turn on the Bluetooth earphones again to "pairing status". If there is an error in the mobile program, please restart the phone. If there is an error in the Bluetooth earphone program, please restart the Bluetooth earphones.

Warning

• Do not dismantle, repair, or modify headphones for any reason, otherwise it may cause electronic components to break down or even completely damage this product due to fire.
• Do not place the device in an environment where the temperature is too low or too high (below 0° C or above 45° C).
• Please avoid using device indicator lights near the eyes of children or animals.
• Do not use this device in thunderstorm weather, as thunderstorms can cause the device to malfunction and increase the risk of electric shock.
• Do not wipe this product with oil or other volatile liquids.
• Do not wet the device when it comes into contact with liquid.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.