CGOLDENWALL DF-15 Hammer Mill Grinder
Product Overview
The CGOLDENWALL DF-15 is a commercial-grade electric hammer mill grinder designed for efficient pulverization of various dry materials. It is suitable for grinding spices, herbs, cereals, and traditional Chinese medicine into fine powders. The grinder features a robust stainless steel construction, a powerful 1200W motor, and a high rotating speed of 20000 r/min, enabling it to process materials quickly and effectively.
This model is engineered for continuous operation, allowing for efficient production workflows. It is important to note that the DF-15 is intended for dry, non-oily, and non-light materials such as walnuts, sesame, peanuts, dried leaves, sea algae, or sea moss, as these can cause jamming or damage.
Key Specifications
| Specification | Details |
|---|---|
| Model | DF-15 |
| Manufacturer | CGOLDENWALL |
| Voltage | 110 V |
| Power | 1200 W |
| Rotating Speed of Motor | 20000 r/min |
| Fine Powder Output | 1-3 kg/h |
| Coarse Powder Output | 1-15 kg/h |
| Crushing Chamber Diameter | About 11cm |
| Net Weight | About 11KG (25.4 pounds) |
| Dimensions | 38 x 20 x 40cm (15 x 7.9 x 15.7 inches) |
| Screens Included Size | 60 - 180 mesh |
| Working Time | Continuous working up to 5 hours (with recommended breaks) |
| Noise Level | Higher (typical for industrial grinders) |
Key Features
- Efficient Grinding: Equipped with sharp stainless steel blades and a powerful 1200W motor for rapid pulverization.
- Continuous Grinding Capability: Designed to allow for continuous operation by collecting ground powder, facilitating high-volume processing.
- Wide Application: Suitable for grinding a variety of dry ingredients including spices, herbs, cereals, and traditional Chinese medicine.
- Fast Heat Dissipation: Features a design that promotes heat dissipation, with recommendations for usage cycles (e.g., 15 minutes on, 10 minutes rest) to ensure longevity and prevent overheating. Can operate up to 10 hours a day with proper use.
- Durable Construction: Built with high-quality materials, including stainless steel, suggesting longevity and robustness.
- Warranty and Support: Comes with a one-year warranty and lifetime technical support from the manufacturer.
Comparison with Other CGOLDENWALL Models
CGOLDENWALL offers a range of hammer mill grinders with varying capacities and specifications:
| Model | Power | Rotating Speed | Production Capacity | Screens Included Size | Continuous Feeding |
|---|---|---|---|---|---|
| DF-15 | 1200 W | 20000 r/min | 15kg/h | 60 - 180 mesh | Yes |
| DF-20 | 1500 W | 2840 r/min | 20kg/h | 60 - 180 mesh | Yes |
| DF-40 | 2200 W | 5000r/min | 40kg/h | 60 - 180 mesh | Yes |
| HC-2500 | 3600W | 36000r/min | 2500g | 30 to 300 mesh | NO |
| SY-2200 | 2200W | 1400r/min | 15-50kg/h | 50-200 mesh | Yes |
| KD0281 (Manual) | - | Manual | Manual | - | - |
Customer Reviews Summary
The CGOLDENWALL DF-15 Hammer Mill Grinder has an average rating of 4.1 out of 5 stars based on 21 global ratings.
Positive Feedback Highlights:
- Customers frequently praise the machine's robust build quality, describing it as "extraordinarily well made," "solid machinery," and "powerful."
- Many users find it efficient for its intended purpose, handling tough materials like dried mushrooms and roots effectively when dry.
- Customer service is often cited as excellent, with prompt responses and efficient resolution of issues, including fast replacements.
Areas for Improvement or Caution:
- Some users reported premature failure, with one instance of the machine dying after only 4 months of infrequent use.
- A common point of feedback is the lack of comprehensive documentation, with users needing to figure out part installation and screen identification themselves.
- The machine is noted to be loud, which is expected for an industrial-grade appliance.
- One user expressed disappointment that it was not suitable for grinding dry herbs as intended, suggesting careful material selection is crucial.
