Instructions for CableWholesale models including: LC Simplex Fast Connector, Simplex Fast Connector, Fast Connector, Connector

LCZ Connectors-Termination-Instructions

Product Manual

LC Simplex OM3/4 Fast Connector for 2.0mm Duplex Zip Cable, Aqua

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 4.32MB

Document Document

Insert the connector boot onto the cable

Strip outer jacket about 50mm to reveal 900-micron fibers

Using the label, measure from the end
of the buffer and make a mark between the 250µm and 125µm section

Strip the buffer to the mark using the middle hole, then the small hole on the
stripper in short increments

Cleave your fiber strand to 10mm from the mark

Strip the remaining 20mm of buffer using the middle hole on the stripper

Clean any impurities from your cable using alcohol and a lint-free cloth

Insert the fiber into the connector body until the strand meets resistance and
bows slightly

Remove the connector jig

Lock the fiber inside the connector by pressing the amber button

Screw the boot onto the connector body and trim any exposed Kevlar yarn

To remove or re-terminate the connector, simple unscrew the boot and
replace the jig