Release Notes for Omada SDN Controller V5.13.30.8

1. Supported Device Models and Firmware

EAP

• EAP783, EAP773
• EAP690E HD, EAP683 LR, EAP680, EAP673, EAP670, EAP660 HD
• EAP655-Wall, EAP653, EAP650-Outdoor, EAP650-Wall, EAP650, EAP620 HD
• EAP615-WE, EAP615-Wall, EAP613, EAP610-Outdoor, EAP610
• EAP265 HD, EAP235-Wall, EAP230-Wall, EAP225-Outdoor, EAP223
• EAP215-Bridge KIT, EAP211-Bridge KIT
• EAP115-Bridge KIT, EAP115-Wall, EAP113-Outdoor
• EAP245 V3, EAP225 V3, EAP225-Wall V2, and above versions
• EAP115 V4, EAP110 V4, EAP110-Outdoor V3, and above versions

Switch (TL- prefix ignored for some models)

• SG6428X, SG6428XHP, SG6654X, SG6654XHP, SX6632YF
• SG3218XP-M2, SG3210X-M2, SG3210XHP-M2
• SX3016F, SX3008F, SX3206HPP
• SG3452XP, SG3452X, SG3452P, SG3452
• SG3428X-M2, SG3428XPP-M2
• SG3428XMP, SG3428XF, SG3428X, SG3428X-UPS
• SG3428MP, SG3428, SG3210XHP-M2
• SG2428P, SG2218P, SG2218, SG2016P, SG2210MP, SG2008P
• SG3210 V3, SG2210P V3.2, SG2008 V3, SL2428P V4, and above versions

Gateway

• ER8411
• ER7206 V1 (TL-ER7206 V1) and V2, ER707-M2, ER706W-4G, ER706W
• ER605W, ER605 V1 (TL-R605 V1) and V2

2. New Features & Enhancements

New Features

• 1. Expanded Language Support: Added language support for Română, Български, Українська мова and Srpski.
• 2. 2FA: Added support for Two-Factor Authentication (2FA) in Global view > Account Security, all accounts will be asked for extra authentication to log in for higher account security.
• 3. DPI: Added support for Deep Packet Inspection in Site view > Settings > Network Security > Application Control, which helps to monitor network traffic through Application Layer.
• 4. Remember Device: Added support for remembering devices in Site View > Devices-Sidebar > Config-General, which allows the Controller to remember this device and automatically adopt it after it is reset and being found by the Controller.
• 5. Application result: Added support for display of application result of device configuration in Site View > Devices.
• 6. Expanded Devices Support: Added support for EAP783, ER605W, ER706W-4G, P2P Bridge Devices, and Layer-3 Switches: SG6428X, SG6428XHP, SG6654X, SG6654XHP, SX6632YF.
• 7. Expanded Layer-3 Switch features:
  • ■ QoS
  • ■ VRRP
  • ■ OSPF
  • ■ STACK
  • ■ STP Extension

Enhancements

• 1. Optimized the information of uplink and downlink device on the device details page.
• 2. Optimized sorting for the following locations: Firmware Version, DHCP Reservation, LAN Network.
• 3. Optimized the Voucher configuration options in Hotspot Manager.
• 4. Added auto de-authentication of relevant clients when a voucher is deleted.
• 5. Added support for Batch Delete VLAN in Site View > LAN, which allows to delete multiple VLAN at once.
• 6. Optimized Gateway WAN and WAN/LAN port configuration methods in Site View > Settings > Wired Network > Internet, and supported the Gateway WAN/LAN port status switch (firmware support required).
• 7. Optimized the sidebar to support dragging, fixing, prompting when leaving, and closing functions.
• 8. Optimized the issue of ER706W USB interference with 2.4GHz Wi-Fi.
• 9. Optimized the Java version detection and prompting, suggesting running the Controller in x64 Java environment.
• 10. Optimized the Voucher configuration options in Hotspot Manager.
• 11. Added auto de-authentication of relevant clients when a voucher is deleted.
• 12. Added support for Batch Delete VLAN in Site View > LAN, which allows to delete multiple VLAN at once.
• 13. Optimized Gateway WAN and WAN/LAN port configuration methods in Site View > Settings > Wired Network > Internet, and supported the Gateway WAN/LAN port status switch (firmware support required).
• 14. Optimized the sidebar to support dragging, fixing, prompting when leaving, and closing functions.
• 15. Optimized the issue of ER706W USB interference with 2.4GHz Wi-Fi.
• 16. Optimized the clarity of some texts and icons in Dark mode.
• 17. Optimized automatic deletion of tmp files generated by Backup/Auto Backup.
• 18. Optimized the PUBLIC IP ADDRESS column in Devices List.
• 19. Optimized the validation rules for WAN Static IP address, allowing setting to Static IP with a 31-bit network mask.
• 20. Optimized the Global View for viewer account, allowing users with Viewer permissions to see the Sites they can access in the Global View.
• 21. Optimized the name of "AI WLAN Optimization" to "WLAN Optimization", removed the Schedule module.
• 22. Optimized the PMF mode automatic selection logic and the prompts when PMF/WPA mode changes.
• 23. Optimized the Controller version number to 4 digits, the Backup files are compatible when the first three digits are identical, improving Site import and migration.

3. Bug Fixed

• 1. Fixed the issue that configuration can't be sent to the Router and reports "The configurations of device are different from the configuration from the controller".
• 2. Fixed the issue that some models' firmware can't be upgraded online, but only through manual upgrade.
• 3. Fixed the issue that the clients can't connect the SSID with MAC Filtering under some certain configuration steps.
• 4. Fixed the issue that Controller takes up a lot of disk space after running for a long time.
• 5. Fixed the issue that LTE models lose the Internet after changing the Rate Limit via Open API.
• 6. Fixed the issue that the Tx Power (EIRP) setting of the EAP changes to High after the reboot, although the actual EIRP maintains.
• 7. Fixed the issue that Batch Config of WLAN Group doesn't work for EAPs.
• 8. Fixed the issue of the display error of some models in Device Map.
• 9. Fixed the issue of failing to create SSID via Open API.
• 10. Fixed the issue of occasional accounting error when use external Radius server.
• 11. Fixed the port display error in Topology when the Root Switch is connected to multiple downlink Switches.
• 12. Fixed the status display error of Gateway WAN port in the previous version.
• 13. Fixed the issue of error report "Unsupported Request Path" when go to Site View > Insight > Past Connections > Association Failures.
• 14. Fixed the issue of failing to restore the backup file on the first attempt.
• 15. Fixed the issue of failing to upgrade the firmware version of EAP670.

Note

• 1. This version of the Controller is fully applied to the Omada APP of version 4.14 or above.
• 2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
• 3. For Linux version, 64-bit Linux OS is supported and Java 8 (or OpenJDK-8) and above, MongoDB v3 and v4 are necessary required. How to install Omada SDN controller on Linux system (above Controller 5.0.29)
• 4. If you are planning to upgrade to this version from an old Controller (V3.2.17 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading.
• 5. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.17 or below.