Product Overview
The Intelligent Sports Bracelet is a versatile fitness tracker designed to help you monitor your daily activities and improve your health habits. It features a sleek design with a digital display and two control buttons (Button A: Top, Button B: Bottom).
Key Features:
- High-Sensitivity 3D Accelerometer: Accurately captures subtle movements for precise step counting.
- Flexible Step Counting Modes: Supports both single-session and 24-hour continuous step tracking.
- Time/Date Display: Manually adjust time, date, height, and weight.
- Calorie & Distance Tracking: View your exercise data directly on the bracelet.
- 24-Hour Data Storage: Automatically clears data at midnight for intelligent, hassle-free tracking.
- Silent Alarm Clock: Set alarms directly on the bracelet without needing an app.
- Timer Function: Use the bracelet to time your activities.
- Smart Sleep Monitoring: Helps cultivate good sleep habits.
- Integrated USB Charging: Convenient plug-and-charge design.
- Rechargeable Polymer Battery: Enhanced safety and extended lifespan.
First Use & Charging: Before initial use, remove the wristband and charge the bracelet module. It can be charged directly via any computer USB port or USB power adapter.
Important Tip: To prolong the bracelet's lifespan, remove the core and clean any water or sweat after washing hands or exercising.
Basic Operations
The bracelet is controlled using Button A (Top) and Button B (Bottom).
Checking Battery Level:
If the screen is off, long press Button B to display the current battery level.
Time & Date Adjustment:
- View Time: Short press Button B once to display the time. Wait 3 seconds to display the date.
- Enter Timer Mode: While in time display mode, long press Button B to enter timer mode. Short press Button B to start/pause the timer. Long press Button B again to exit timer mode.
- Adjust Time, Date, Year, 12/24-Hour Format:
While in time display mode, long press Button A for 3 seconds. The "hour" will flash, indicating adjustment mode.
- Press Button A or B to adjust the hour.
- Long press Button A for 3 seconds to switch to "minutes".
- Continue pressing Button A or B to adjust the minutes.
- Repeat this method to set the "Month", "Date", "Year", and "12/24-hour display mode".
Step Counting:
- View Steps: Short press Button B twice to view current steps.
- Clear Steps: While in step display mode, long press Button B for 3 seconds to clear current steps and restart counting. (The bracelet automatically clears all steps at midnight daily).
Height & Weight Adjustment:
While in step display mode, long press Button A for 3 seconds. "Height" will flash.
- Press Button A or B to adjust height.
- Long press Button A to switch to "Weight".
- Press Button A or B to adjust weight.
Distance & Calories:
- View Distance: Short press Button B three times to view distance traveled.
- View Calories: Short press Button B four times to view calories burned.
Alarm Clock:
- View Alarm: Short press Button B five times to display "Alarm Clock 1". Short press Button B six times to display "Alarm Clock 2".
- Enable/Disable Alarm: While in alarm display mode, long press Button B for 3 seconds to enable or disable the alarm. "OFF" will be displayed when disabled. When enabled, the default alarm time is 07:00.
- Adjust Alarm Time: While the alarm is enabled, long press Button A until the "hour" flashes.
- Press Button A or B to adjust the hour.
- Long press Button A to switch to "minutes".
- Press Button A or B to adjust the minutes.
- Once the desired hour/minutes are set, long press Button A to confirm the alarm clock.
Sleep Monitoring:
- View Sleep Status: Short press Button B seven times to view current sleep status.
- Enable/Disable Sleep Monitoring: While in sleep status display, long press Button B to enable or disable sleep monitoring. "OFF" indicates disabled.
- Sleep Quality Display: The display shows sleep quality as "Excellent", "General", or "Poor". (Note: If you enter sleep mode and do not manually exit after 8 hours, it will automatically exit and display sleep quality).
Product Specifications
| Parameter | Specification |
|---|---|
| Material | Food-grade environmentally friendly silicone + environmentally friendly ABS casing |
| Display | LED display |
| Charging Method | USB |
| Power Supply Voltage | DC=5V |
| Battery Capacity | 50mAh |
| Pedometer Sensor | G-sensor |
| Step Accuracy | ±5% |
| Step Display Limit | No upper limit |
| Vibration Method | Flat motor 8*2mm |
| Weight | 15g (subject to actual product) |
| Dimensions (L*W*H) | 221*16.3*8mm (subject to actual product) |
| Atmospheric Pressure | 860hpa-1060hpa |
Charging Instructions
The device can be charged by plugging it into a computer's USB port or a USB power adapter.
Important Charging Tips:
- If the watch has no power, charge it for approximately 0.5 hours.
- Ensure the watch module is plugged in the correct direction; otherwise, it will not charge.
- When charging, a blue light will flash. The blue light will stop flashing when fully charged.
How to Read Electric Quantity:
If the watch display is off, press and hold Button B for 3 seconds to display the electric quantity. When the battery power is below 10%, the watch will remind you to charge when the time is displayed.
Interchangeable Strap & Waterproofing
Interchangeable Strap:
To remove the module from the strap, pull the strap gently from the module's connection point.
Waterproof Level: IP65
The watch has an IP65 waterproof rating. It supports wearing the watch while washing hands but is not suitable for bathing or swimming. If the watch accidentally gets wet, dry it naturally, and it will function correctly.
Device Connection & App
Settings for time, height, and weight can also be managed through the computer application (AP). The download address for the AP (T5) is www.asixwatch.com.
To connect the device: Start the AP application. Connect the smart wristband to the computer. Briefly press the button on the wristband to transmit data and synchronize the time.