Aldes 11069018 Motorized Damper
REGISTRE motorisé d'isolement VEX430, VEX530 et VEX640
Product Description
These dampers are used to isolate the air inlet and outlet when the unit is not operating, preventing air from entering the building. Their motors are directly controlled by the unit's regulation system.
Application Areas
- Residential collective housing, New construction, Renovation, Commercial premises
Installation
- Supplied in pairs with: pre-wired actuators, an "RG" connection cable, a junction box, self-tapping screws, M8 screws for attaching the damper to the unit's opening frame, and a self-adhesive EPDM gasket (5x10 mm section) to be applied to the damper flange to ensure structural sealing.
- Compatible with rectangular/circular transformation pieces and non-insulated flexible connectors.
Key Features
- Galvanized steel frame and aluminum blades.
- Casing airtightness Class B, blade airtightness Class 2 (negative pressure) / 3 (positive pressure) according to standard NF EN 1751.
- IP54 actuator (on/off) with a return spring to close the dampers and isolate the ducts in case of power failure.
- Connection cable for regulation supplied.
Dimensional Data
| Reference | P (mm) | Ø10 | Weight (kg) |
|---|---|---|---|
| 11069018 | 130 | 7.85 |
Diagram showing dimensions:
Length (L): [dimension value] mm
Width (W): [dimension value] mm
Height (H): [dimension value] mm
Depth (D): [dimension value] mm
Electrical Data
| Reference | Frequency (Hz) |
|---|---|
| 11069018 | 50/60 |
Regulatory Data
| Reference | Air tightness class upstream/downstream | Fire classification |
|---|---|---|
| 11069018 | 2 (negative pressure) / 3 (positive pressure) | C |
