IKEA ELVARLI Shelf Assembly Instructions
This guide provides step-by-step instructions for assembling the IKEA ELVARLI shelf component.
Parts Included
Verify you have all the necessary components before starting:
- Part 146693: 2x Screw with round head and nut
- Part 147075: 2x Screw with hexagonal head
- Part 148288: 4x Threaded knob
- Part 146677: 2x Bracket
- Part 100001: 1x L-shaped hex key
- Part 110084: 1x Longer L-shaped hex key
Diagram Description: An illustration displays all the hardware and components required for assembly, along with their respective quantities and part numbers.
Assembly Steps
Step 1: Prepare Vertical Poles
Diagram Description: Two figures are depicted. The first figure holds assembly parts and shows a question mark, indicating uncertainty. The second figure holds parts and looks towards an IKEA box. This step focuses on attaching components to the base of the vertical poles.
Insert two screws (146693) into the designated holes at the bottom of each vertical pole. Secure these with the corresponding nuts.
Visual Aid: A close-up illustration shows a screw (146693) being inserted into a hole on a vertical pole, with a nut being attached.
Step 2: Attach Brackets
Diagram Description: This step illustrates attaching a bracket (146677) to the vertical poles. A hexagonal screw (147075) is used, and the L-shaped hex key (100001) is shown for tightening.
Attach two brackets (146677) to the vertical poles at the desired height. Use one screw (147075) for each bracket, tightening with the hex key (100001).
Visual Aid: A close-up illustration shows a bracket (146677) being aligned with holes on the vertical pole, and a screw (147075) being inserted and tightened with tool (100001).
Step 3: Install Shelf
Diagram Description: The perforated shelf is shown being placed onto the attached brackets. Two threaded knobs (148288) are used to secure the shelf, with the longer hex key (110084) indicated for tightening.
Position the perforated shelf onto the installed brackets. Secure the shelf by inserting two threaded knobs (148288) through the shelf and into the brackets. Tighten using the longer hex key (110084).
Visual Aid: A close-up illustration shows the shelf resting on the brackets, and threaded knobs (148288) being inserted and tightened.
Step 4: Insert Shelf into Frame
Diagram Description: The assembled shelf unit is shown being slid into a larger frame structure (implied to be part of a larger ELVARLI system). Arrows indicate the direction of movement. An illustration on page 6 shows the overall frame and the shelf being inserted.
Carefully slide the assembled shelf into its final position within the ELVARLI frame. Ensure it is fully seated and stable.
Step 5: Final Securing
Diagram Description: Close-up views on page 7 show how the shelf is further secured to the frame. Hands are shown manipulating fasteners.
Use the remaining threaded knobs (148288) to complete the securing of the shelf to the frame. Ensure all connections are firm.
