Outsunny Gazebo Assembly Instructions
Model Numbers: 01-0870, 01-0879
For assembly video, please scan the QR code provided in the original document.
Tools Recommended
Important Safety Notice
Product is NOT intended for the following:
- As a safety barrier to prevent unsupervised access to pools, hot tubs, spas or ponds.
- As load-bearing support for a building, structure, heavy objects or swings.
- In structures that trap wind, rain or snow, which would create extra load on the product.
- Accumulated snow must be removed from the roof.
- DO NOT climb or walk on the roof for any reason.
- Wear gloves to avoid injury from possible sharp edges of individual elements before assembly.
- During installation, follow all safety warnings provided with your tools.
- Some structures may require two or more people to install safely.
- Check for underground utilities before digging or driving stakes into the ground!
- It is important during assembly to closely follow the instructions, complete the assembly on a solid level surface, and follow the instructions to square up, level, and anchor the structure. This will reduce the gap at connections during assembly.
- Do not place or install your tent under trees due to possible lightning strikes or branch collapse in adverse weather conditions.
- For best conditions in strong winds, place the narrow end of the tent into the wind.
- Do not drop the tent bag.
- Do not bounce or hit the tent bag to remove it; these actions could damage the frame.
- THIS PRODUCT REQUIRES A MINIMUM OF TWO PEOPLE FOR ASSEMBLY.
- Under no circumstances should this product be used to cover automobiles, marine vehicles, or similar items.
- CAUTION: Be careful not to pinch your fingers during assembly and disassembly of the tent when joining the frame pieces.
Customer Support
If you have any questions, please contact our customer care center. Our contact details are:
| Country | Phone | |
|---|---|---|
| US | 001-877-644-9366 | customerservice@aosom.com |
| CA | 416-792-6088 | customerservice@aosom.ca |
| UK | 0044-800-240-4004 | enquiries@mhstar.co.uk |
| DE | 0049-0(40)-88307530 | service@aosom.de |
| FR | 0033-1-84166106 | aosom@mhfrance.fr |
| ES&PT | 0034-931294512 | atencioncliente@aosom.es |
| IT | 0039-0249471447 | clienti@aosom.it |
Parts List
| Part | Quantity |
|---|---|
| A | 4 |
| B | 2 |
| C | 2 |
| D | 2 |
| E | 2 |
| F | 4 |
| G | 6 |
| H | 1 |
| I | 1 |
| J | 4 |
| K | 4 |
| L | 8 |
| M | 4 |
| N | 4 |
| O | 2 |
| P | 2 |
| U | 1 |
| V | 1 |
| W | 4 |
| X | 4 |
Hardware List
| Part | Description | Quantity |
|---|---|---|
| Q | M6*68 | 4 (+1 spare) |
| R | M6*40 | 16 (+1 spare) |
| S | M6*12 | 84 (+2 spare) |
| Y | 96 (+2 spare) | |
| Z1 | Wrench | 1 |
| Z2 | Wrench | 1 |
| T | 8 (+1 spare) | |
| T1 | 8 (+1 spare) |
Assembly Instructions
Step 01: Leg Assembly
Assemble the base of each leg by inserting pole A into base part J and securing with screw Q.
Step 02: Side Frame Construction
Construct side frame sections. Connect poles B and C to connector K using screws S and fasteners Y. Repeat for poles D and E with connector K.
Step 03: Main Frame Assembly
Assemble the main frame. Connect vertical poles (A) to horizontal beams (B, C, D, E) using screws R.
Step 04: Diagonal Support
Reinforce the frame by attaching diagonal support beams (L) to the corners using screws S.
Step 05: Roof Support Installation
Install roof support beams. Attach horizontal beams (M, N) to the top of the vertical poles (A) and secure with screws S.
Step 06: Roof Structure Assembly
Assemble the roof structure. Connect roof rafters (F, G) to central connectors (H, I, O, P) using screws S.
Step 07: Roof to Frame Attachment
Attach the roof structure to the main frame. Connect roof beams (F, G) to the frame's top connectors using fasteners Y and screws S.
Step 08: Canopy Placement
Drape the main canopy fabric (U) over the assembled roof frame.
Step 09: Side Canopy Attachment
Attach the top edge of the side canopy fabric (V) to the frame. Secure the bottom of the side canopy fabric (V) using poles T or T1.
Step 10: Mesh Wall Attachment
Attach the mesh side walls (W) to the frame using fasteners Y.
Step 11: Outer Curtain Attachment
Attach the outer side curtains (X) to the frame using fasteners Y. The gazebo is now complete.
Importer Information
US: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
CA: Imported by Aosom Canada Inc., 1251 Tapscott Road, Unit 101, Scarborough, Ontario Canada M1X 1S9. Made in China.
CA (FR): Importé par Aosom Canada Inc., 1251 Rue Tapscott, Unité 101, Scarborough, Ontario Canada M1X 1S9. Fabriqué en Chine.
UK: Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
FR: Adresse d'importation: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Fabriqué en Chine.
ES: Importador: SPANISH AOSOM, S.L., C/ROC GROS, N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. WWW.AOSOM.ES. ATENCIONCLIENTE@AOSOM.ES. TEL: 931294512. Hecho en China.
DE: Adresse des Importeure: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. In China hergestellt.
IT: Importato da: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. Fatto in Cina.
