MEAN WELL HBG-60-P Series: 60W Constant Current LED Driver Datasheet

HBG-60-P Series

Brand: MEAN WELL

Overview

Features

Constant Current mode output
Circular shape PCB type design with class II design
Built-in active PFC function
Class 2 power unit
Typical lifetime >50000 hours
5 years warranty

Applications

LED bay lighting
LED stage lighting
LED spot lighting
LED down lighting

Description

The HBG-60-P series is a 60W AC/DC PCB type LED driver featuring a circular shape design. It operates from 90~295VAC and offers constant current output models with rated currents between 1050mA and 2100mA. With high efficiency up to 90% and a fanless design, the series is capable of operating in ambient temperatures from -40°C to +70°C under free air convection.

Model Encoding

The model encoding follows a structure: HBG - 60 - [Rated Output Current] P. For example, HBG-60-1050P indicates a 60W driver with 1050mA rated output current, designed as a PCB type.

Specifications

Specification	HBG-60-1050P	HBG-60-1400P	HBG-60-2100P
RATED CURRENT	1050mA	1400mA	2100mA
RATED POWER	57.75W	60.2W	60.9W
CONSTANT CURRENT REGION Note.2	37~55V	28~43V	19~29V
OPEN CIRCUIT VOLTAGE(max.)	60V	50V	35V
CURRENT ADJ. RANGE	680~1050mA	910~1400mA	1360mA~2100mA
CURRENT RIPPLE	25% max. @rated current
CURRENT TOLERANCE	±5.0%
SET UP TIME Note.4	500ms/230VAC, 1200ms/115VAC
VOLTAGE RANGE Note.3	90~295VAC / 127~417VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE	47~63Hz
POWER FACTOR	PF>0.97/115VAC, PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION	THD<20%(@load≥65%/115VC,230VAC; @load≥75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)" section)
EFFICIENCY (Typ.)	90%	89%	89%
AC CURRENT (Typ.)	0.7A/115VAC	0.4A/230VAC	0.3A/277VAC
INRUSH CURRENT (Typ.)	COLD START 45A(twidth=100µs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER	28 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT	<0.75mA/277VAC
OVER CURRENT PROTECTION	Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE PROTECTION	Shut down o/p voltage, re-power on to recover
WORKING TEMP.	Ta=-40~+70°C (Please refer to " OUTPUT LOAD vs TEMPERATURE" section)
WORKING HUMIDITY	20~95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY	-40~+80℃, 10~95% RH
TEMP. COEFFICIENT	±0.03%/℃ (0~60℃)
VIBRATION	10~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS	UL8750, CSA C22.2 No. 250.13-12, ENEC BS EN/EN61347-1 & BS EN/EN61347-2-13, BS EN/EN62384, GB19510.14, GB19510.1 independent, EAC TP TC 004 approved
WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC
ISOLATION RESISTANCE	I/P-O/P:100M Ohms / 500VDC / 25°C/70% RH
EMC EMISSION Note.8	Compliance to BS EN/EN55015, GB/T 17743, GB17625.1, BS EN/EN61000-3-2 Class C (@load≥65%); BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, BS EN/EN55024, light industry level(surge immunity: Line-Line:2KV), EAC TP TC 020
MTBF	4523.2K hrs min. Telcordia SR-332 (Bellcore); 455.5Khrs min. MIL-HDBK-217F (25°C)
DIMENSION	99mm 26mm (D H)
PACKING	0.21Kg; 45pcs/ 10.4Kg/ 1.03CUFT

Technical Diagrams and Characteristics

Block Diagram

The block diagram illustrates the internal architecture of the HBG-60-P series LED driver. Input power (AC/L, AC/N) first passes through an EMI Filter & Rectifiers. This is followed by a control stage featuring O.L.P. (Over Load Protection) and PWM & PFC Control. The regulated power then goes through Power Switching and a final Rectifiers & Filter stage to provide the DC output (V+, V-).

Driving Methods of LED Module

This section explains that the HBG-60-P series operates in constant current mode to directly drive LEDs. The accompanying graph plots "Typical output current normalized by rated current (%)" against "Vo (%)" (output voltage). It shows a "Constant Current area" where the output current is regulated, and a "Hiccup Protection" region that activates under certain conditions. The highest output voltage in the constant current region depends on the end system's configuration.

Output Load vs Temperature

The "Output Load vs Temperature" graph plots "Load (%)" against "AMBIENT TEMPERATURE, Ta (°C)". It demonstrates that the LED driver can operate at 100% load between approximately -25°C and +60°C. The graph indicates that the load capacity de-rates outside this range, allowing operation from -40°C up to +70°C with reduced load.

Static Characteristic

The "Static Characteristic" graph plots "LOAD (%)" against "INPUT VOLTAGE (V) 60Hz". It shows the output load capability across the input voltage range of 90-295VAC. The graph indicates that the output load is maintained across most of this range, with a note advising that de-rating may be necessary under low input voltages.

Power Factor (PF) Characteristic

The "Power Factor (PF) Characteristic" graph plots "PF" against "LOAD (%)" for different input voltages (115V, 230V, 277V). The data shows that the power factor is consistently high, generally above 0.9, for loads of 60% and above across all tested input voltages.

Total Harmonic Distortion (THD)

The "Total Harmonic Distortion (THD)" graph plots "THD" against "LOAD (%)" for different input voltages (115V, 230V, 277V). The results show that the total harmonic distortion remains below 20% for most operating conditions, particularly at higher load percentages.

Efficiency vs Load

The "Efficiency vs Load" graph plots "EFFICIENCY (%)" against "LOAD (%)" for different input voltages (115V, 230V, 277V). This graph highlights the high working efficiency of the HBG-60-P series, which can reach up to 90% or slightly higher, especially when operating at loads between 70% and 100%.

Mechanical Specification

The mechanical specification details the physical dimensions and connection points of the HBG-60-P series LED driver. The unit features a circular PCB with overall dimensions of 99mm in length and 26mm in diameter. Key connection terminals are identified: ACL (Brown wire), ACN (Blue wire), V- (Black wire), and V+ (Red wire), all using UL1015 18AWG*2C wiring. The diagram also indicates various component placements and smaller dimensions like 34.6mm, 18mm, 26mm, and 1.6mm.

Notes and Disclaimers

All parameters not specially mentioned are measured at 230VAC input, rated current, and 25°C of ambient temperature.
Please refer to "DRIVING METHODS OF LED MODULE".
De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details.
Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to an increase in the set up time.
The driver is considered a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without being permanently connected to the mains.
Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

For detailed product liability information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

	MEAN WELL HBG-160P Series: 160W Constant Voltage + Constant Current LED Driver Datasheet for the MEAN WELL HBG-160P series, a 160W AC/DC LED driver featuring constant voltage/constant current output, high efficiency, fanless operation, and dimming capabilities for various LED lighting applications.
	MEAN WELL HBG-100P Series: 100W Constant Current LED Driver Datasheet Detailed specifications, features, applications, dimming methods, and performance characteristics for the MEAN WELL HBG-100P series of 100W Constant Current Mode LED Drivers.
	MEAN WELL HBG-100 Series 100W Constant Current LED Driver Explore the MEAN WELL HBG-100 series, a 100W constant current LED driver. Featuring IP67/IP65 protection, wide 90-305VAC input, active PFC, and versatile dimming options (DALI, 0-10V, PWM, resistance), it's ideal for bay, stage, and spot lighting, including hazardous locations (Type HL).
	MEAN WELL LPF-60 Series 60W Constant Voltage + Constant Current LED Driver Datasheet Datasheet for the MEAN WELL LPF-60 series, a 60W Constant Voltage + Constant Current LED driver. Features IP67 rating, wide input range (90-305VAC), high efficiency up to 90%, and operation from -40°C to +80°C. Suitable for various LED lighting applications including panel lighting, downlights, and decorative lighting.
	MEAN WELL PWM-60 IoT Series: 60W Wireless Constant Voltage LED Driver Explore the MEAN WELL PWM-60 IoT Series, a 60W constant voltage LED driver with Bluetooth mesh dimming. Ideal for indoor, decorative, and architectural lighting, offering IP67 protection and a 5-year warranty.
	MEAN WELL PWM-60 Series: 60W Constant Voltage PWM Output LED Driver Technical Specification Comprehensive technical specifications, features, applications, and operational details for the MEAN WELL PWM-60 series 60W Constant Voltage PWM Output LED Driver. This document covers its constant voltage PWM output, IP67 rating, wide input voltage range, dimming functions (3-in-1 and DALI/DALI-2), and performance characteristics.
	MEAN WELL XLC-60-KN Series: 60W Constant Power LED Driver with KNX Interface Details the MEAN WELL XLC-60-KN series, a 60W constant power LED driver featuring KNX integration for smart lighting. Includes features, applications, technical specifications, dimming operation, mechanical details, and performance graphs.
	MEAN WELL PLC-60 Series: 60W LED Power Supply Datasheet & Specs Explore the technical specifications of the MEAN WELL PLC-60 series 60W LED power supplies. Discover features like universal AC input, high efficiency, adjustable output, and safety compliance for LED lighting solutions.