WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guidelines below for safe use and installation.
- The external flexible cable or cord of this luminaire cannot be replaced.
- If the cord is damaged, the luminaire shall be destroyed.
Part List and Hardware List
PIECE | DESCRIPTION | PICTURE | QUANTITY | PIECE | DESCRIPTION | PICTURE | QUANTITY |
---|---|---|---|---|---|---|---|
A | Bulb | [Light bulb icon] | 1X | D | Lamp Body | [Lamp base with pole icon] | 1X |
B | Socket ring | [Ring icon] | 1X | E | Switch and cord | [Cord with switch and plug icon] | 1X |
C | shade | [Lampshade icon] | 1X |
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
NOTE: PLEASE USE ON/OFF TYPE "A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT. THERE IS A LED 4-WATT BULB IN THE BOX.
Assembly Instructions
Step 1
Put the lamp body (D) on the table. Assemble the shade (C) on the socket and tighten the shade by socket ring (B). Insert the bulb (A) into the socket. Push the switch (E) to make light.
Step 2
Put the light on a level surface to check if everything is stable.