DS18 PRO-RY8.4NMB 8" Mid Bass Woofer
Owner's Manual
Perfect for Motorcycles
Specifications
Parameter | Value |
---|---|
Nominal Diameter | 8" / 203 mm |
Nominal Impedance | 4 OHMS |
RMS Power Handling | 250 Watts |
MAX Power Handling | 500 Watts |
Sensitivity (1w/1m) | 88 dB |
Frequency Response | 40Hz-12KHz |
Recommended Lo Pass Crossover | 400 Hz |
Sold as Pair or Single | Single / Unidad |
Motor
Voice Coil Diameter | 2" / 50.8 mm |
VC Former Material | Til |
Winding Material | CCAW |
Cone Material | Carbon Fiber + Resin |
Dust Cap Material | Carbon Fiber + Resin |
Surround Material | Rubber |
Basket Material | Aluminum |
Basket Color | Black |
Magnet Material | Neodymium Rings |
Magnet Weight | 10 Oz |
Displacement Volume | 0.56 L / 0.02 ft³ |
Thiele & Small Parameters
Equivalent Volume (Vas) | 8.14 L / 0.28 ft³ |
Excursion (one way) (Xmax) | 4.1 mm |
Free Air Resonance (Fs) | 60 Hz |
Mechanical Factor (Qms) | 5.43 |
Electrical Factor (Qes) | 0.96 |
Total Factor (Qts) | 0.81 |
Mechanical Mass (Mms) | 52.12 g |
Mechanical Compliance (Cms) | 0.14 mm/N |
BL Factor (Bl) | 8.83 |
Voice Coil Inductance (Le) | 0.07 mH |
Cone Area (Sd) | 206.12 cm² |
DC Resistance (Re) | 3.8 OHMS |
Mechanical Mass w/o air (Mmd) | 42.7 g |
Efficiency Bandwidth Product (EBP) | 62.5 |
Measurements
Overall Diameter: 8.3" / 212 mm
Overall Depth: 4.5" / 115 mm
Front Mount Baffle Cutout: 7.2" / 185 mm
Mounting Depth: 4" / 104 mm
Motor Diameter: 4.3" / 110 mm
Diagram Description: Top view shows the speaker's overall diameter and mounting hole pattern. Side view details the overall depth, mounting depth, motor diameter, and baffle cutout diameter.
Recommended Enclosures
Single Speaker Sealed Box
Box External Dimensions (WxHxD): 15.75" x 9.06" x 9.06" / 400 mm x 230 mm x 230 mm
Material Thickness: 1/2" / 15 mm
Net Internal Volume: 0.50 ft³ / 14.2 L
Wood Cuts
- Top / Bottom (WxH): 15.75" x 9.06" / 400 mm x 230 mm (QTY: 2)
- Front / Rear (WxH): 15.75" x 7.87" / 400 mm x 200 mm (QTY: 2)
- Left / Right (WxH): 7.87" x 7.87" / 200 mm x 200 mm (QTY: 2)
Diagram Description: Top view shows a circular cutout of 7.2" / 185 mm. Rear view indicates box dimensions and port placement.
Single Speaker Ported Box
Box External Dimensions (WxHxD): 23.62" x 9.06" x 10.26" / 600 mm x 230 mm x 260.7 mm
Material Thickness: 1/2" / 15 mm
Net Internal Volume: 0.75 ft³ / 21.2 L
Tuning Frequency: 52 Hz
Port Area: 15.50 inch² / 100 cm²
Port Inlet (WxH): 1.97" x 7.87" / 50.0 x 200 mm
Port Length: 15.81" / 401.7 mm
Wood Cuts
- Top / Bottom (WxH): 23.62" x 10.26" / 600 mm x 260.7 mm (QTY: 2)
- Front (WxH): 21.06" x 7.87" / 535 mm x 200 mm (QTY: 1)
- Rear (WxH): 23.62" x 7.87" / 600 mm x 200 mm (QTY: 1)
- Left (WxH): 9.08" x 7.87" / 230.7 mm x 200 mm (QTY: 1)
- Right (WxH): 9.67" x 7.87" / 245.7 mm x 200 mm (QTY: 1)
- Port (WxH): 7.11" x 7.87" / 180.7 mm x 200 mm (QTY: 1)
- Port (WxH): 5.55" x 7.87" / 141 mm x 200 mm (QTY: 1)
Diagram Description: Top view shows a circular cutout of 7.2" / 185 mm. Front view details box dimensions and port. Rear view shows box dimensions.
Warranty & Warnings
Warranty: Please visit DS18.com for more information on the warranty policy.
DS18 reserves the right to change products and specifications at any time without notice. Images may or may not include optional equipment.
WARNING: Cancer and Reproductive Harm. Visit www.P65Warning.ca.gov.