Product Overview
This document provides the owner's manual and technical specifications for the DS18 PRO-NS6.4, a 6.5-inch mid-range loudspeaker featuring an ultra-slim neodymium magnet. It is designed and engineered in the USA.
Model: PRO-NS6.4
Type: 6.5" Mid-Range Loudspeaker with Ultra Slim Neodymium Magnet
Spanish Description: Altavoz de Rango Medio de 6.5" con Magneto Ultra Delgado de Neodimio
Specifications
Specification | Value |
---|---|
Nominal Diameter | 6.5" / 167mm |
Nominal Impedance | 4 Ohms |
RMS Power Handling | 150W |
MAX Power Handling | 300W |
Sensitivity (1w/1m) | 94 dB |
Frequency Response | 100Hz - 12KHz |
Recommended Hi Pass Crossover | 180Hz |
Sold As | Single / Unidad |
Motor Specifications
Motor Component | Material / Specification |
---|---|
Voice Coil Diameter | 1.5" / 38.6 mm |
Voice Coil Former Material | KSV |
Winding Material | Copper / Cobre |
Cone Material | Paper / Papel |
Dust Cap Material | Paper / Papel |
Surround Material | Cloth / Tela |
Basket Material | Steel / Acero |
Basket Color | Glossy Black / Negro Brillante |
Magnet Material | Neodymium / Neodimio |
Magnet Weight | 1.79 Oz |
Thiele & Small Parameters
Parameter | Value |
---|---|
Equivalent Volume (Vas) | 4.58L / 0.161ft³ |
Excursion (one way) (Xmax) | 2 mm |
Free Air Resonance (Fs) | 137 Hz |
Mechanical Factor (Qms) | 4.906 |
Electrical Factor (Qes) | 1.072 |
Total Factor (Qts) | 0.88 |
Mechanical Mass (Mms) | 7.356g |
Mechanical Compliance (Cms) | 183.287m cm/N |
BL Factor (BL) | 4.2 |
Voice Coil Inductance (Le) | 2.695mH |
Cone Area (Sd) | 132.732 Cm³ |
DC Resistance (Re) | 3.2 ohms |
Mechanical Mass w/o air (Mmd) | 6.477 g |
Physical Measurements
Measurement | Value |
---|---|
Overall Diameter | 6.57" / 167mm |
Overall Depth | 2.2" / 56mm |
Front Mount Baffle Cutout | 5.7" / 145mm |
Mounting Depth | 1.96" / 50mm |
Motor Diameter | 4" / 103mm |
Diagrams and Performance Data
Dimensional Diagram Description
The speaker features a circular design. Key dimensions are indicated: an overall diameter of approximately 6.57 inches (167mm), an overall depth of 2.2 inches (56mm), a front mount baffle cutout diameter of 5.7 inches (145mm), and a mounting depth of 1.96 inches (50mm). The central motor structure has a diameter of 4 inches (103mm).
SPL vs Frequency Graph Description
The Sound Pressure Level (SPL) versus Frequency graph displays the loudspeaker's output characteristics. The Y-axis represents SPL in dB (from -90 to 120 dB), and the X-axis represents frequency in Hz (from 20 Hz to 20K Hz). The graph shows the speaker's sensitivity and frequency response, indicating its performance across the audible spectrum. The phase response is also shown on the right Y-axis in degrees.
More Information
For more information, please visit DS18.COM.
Tagline: We Like It Loud